Thanks a bunch, Ron. Saved me the time and travel to a dealership for repair. Exactly the problem with my '04 Explorer XLT. I avoided the foam remedy and drilled out the old metal pin that had broken in the flapper arm, installed a zip tie through the hole and the hole in the vacuum diaphragm's arm. Happy, chilled wife.
Thank you! I’ve been trying to fix my 05 Mercury Mountaineer with this same issue for the last 4 months! The Arizona summer has been brutal! This was incredibly helpful and exactly what had happened to my max ac panel.
Thanks man! Just did the same job on my Explorer thanks to you! Side note, Ford sealed up that useful door you pulled the “flapper” out of, in my 2003 model. Just used tin snips up the sides after screw removal, and it worked great!
Thanks Ron! I have the same problem with my 2003 Ford Explorer XLT. This is the best video about this problem among others I just watched. Thanks again!
I can't thank you enough for sharing. We have an 2002 as well it's the 2nd time we've had this issue the 1st time we paid to replace blendoor it might have worked for 2 yrs.
I had the same problem until i saw your video thank you, unscrewed the screws except my 2003 explorer didnt have that flapper door with hinges you showed that opened, i pryed the front black flap open with a knife and got the loose flap laying covering the screen fan. and vaccumed alot of leaves and debri out of that screen enclosure. Wandering how all those leaves got in there ? The leaves and that heavy flapper was preventing almost no airflow. Thank You again, you just saved me from selling my explorer.
Thank you Very Much Ron !!! This VIDEO was Exactly what I needed and taking the time to Explain and Educate me on how its fixed and also what the Problem is on how it Broke.GREAT VIDEO AND CAMERA WORK TOO. Again I cant thank you enough, ESPECIALLY GETTING MY WIFE WHO IS ALWAYS HOT, OFF MY BACK. THANK YOU👍🌎✌YOUR FRIEND FROM MASSACHUSETTS TIM THE ELECTRICIAN 🌎✌
I have a 02 ford explorer with 300,000 miles which I absolutely love, but my flap broke so I just screwed it to the open position which is a temporary fix, it works for now
Same exact scenario except I had the six cylinder motor 4.0 l 2003 Ford Explorer and did the exact same thing I screwed that door flapper that was stuck down on the fan to the whatever I could really just screwed it and shut the fresh air side now the fan blows great but I did have to get a new compressor after a little while but major thing is make sure you just get that orifice tube switched when you put in a new compressor I didn't do that and now I need to get that orifice tube replaced
Hey Ron. Here is another issue with these Fords and a lot of vehicles, my car has a total air flow loss every time I hit the gas, because of vacuum leaks in the old air tubes. After spending a day running down every vacuum tube under the hood and under the dash, I found two busted plastic fittings. I expected it to be split tubes, but was simply old hard plastic parts that become fragile with age.
Just did this for a 2004 explorer after removing the screws had to cut vertical on the sides to make a flap to get door out my question is can you just leave it without a door it blows great though thanks
Thank you! I’m having this problem and it’s getting too hot right now so I’m doing this tomorrow morning, Thanks! There should be a Recall on this since I’ve seen this happening to too many cars, mine is a 2005 Mercury Mountaineer
I made some cuts to get access to the fresh air door without too much damage,then I filled the door hinge with high temp RTV JB weld (on left side) , put the door into position and reached up and pulled the plastic hinge out (left side) then pushed back into the door and let it set for an hour,works great and very little damage to the plastic housing by cutting it with a utility knife,but even after a new blower motor my airflow still sucks,so now I guess I'm working on the blend door!
Good video, learned a lot. I have a 2005 Explorer. Did everything mentioned (didn't have the handy dandy service flap) and had to cut my opening with my Dremel. Only to find my door isn't broke. Still very little air flow. It was a good system orientation. Any suggestions, seriously. The door closes on AC/recirc and I have a screen. One thing I didn't heck was if the screen is plugged. No matter where I put the MODE selector I get defrost. I have ordered a new Dorman switch/selector
Is it the same setup for a 2004 Crown Vic LX ? I also own a '98 F-150 that has experienced Heater Core Issues ( I will tell you going 65 mph, with the air on and the heater core/blend door fail It is a scary if not down right poisonous thing! I rolled down the windows shut the air off and thankfully got over to the shoulder. People behind me stopped and approached with fire extinguishers because they thought I was on fire!! There actually is a recall on my year heater core and all have to be replaced with brass heater cores. Just a FYI thanks for your vids.
So now they have no cabin air mode and will be pulling outside air instead of recirculating? Isn't most of the issue going to be a clogged evap core since there's no filter for it?
First off not all trucks had the air filter option. Second the proper repair would have been to remove the entire dash and replace evac box complete. That was not an option for the owner financially.
Ok I don't have the flapper thing on my 2004 ford explorer xlt v8 so how to I take that part off with out taring apart my dash so I can clean out the mouse nest that is in there? And check to see if my flap is broken....fml.
Thanks a bunch, Ron. Saved me the time and travel to a dealership for repair. Exactly the problem with my '04 Explorer XLT. I avoided the foam remedy and drilled out the old metal pin that had broken in the flapper arm, installed a zip tie through the hole and the hole in the vacuum diaphragm's arm. Happy, chilled wife.
Thank you! I’ve been trying to fix my 05 Mercury Mountaineer with this same issue for the last 4 months! The Arizona summer has been brutal! This was incredibly helpful and exactly what had happened to my max ac panel.
Thanks man! Just did the same job on my Explorer thanks to you! Side note, Ford sealed up that useful door you pulled the “flapper” out of, in my 2003 model. Just used tin snips up the sides after screw removal, and it worked great!
Most are sealed that I have done since.
Awesome, this must’ve happened to my daughters 2002 explorer.
Looks like a weekend project. Many thanks doing the video
Thanks Ron! I have the same problem with my 2003 Ford Explorer XLT. This is the best video about this problem among others I just watched. Thanks again!
I can't thank you enough for sharing. We have an 2002 as well it's the 2nd time we've had this issue the 1st time we paid to replace blendoor it might have worked for 2 yrs.
I appreciate this video so much just did this to my 2005 and now I can have nice cold blowing ac for the summer!
I had the same problem until i saw your video thank you, unscrewed the screws except my 2003 explorer didnt have that flapper door with hinges you showed that opened, i pryed the front black flap open with a knife and got the loose flap laying covering the screen fan. and vaccumed alot of leaves and debri out of that screen enclosure. Wandering how all those leaves got in there ? The leaves and that heavy flapper was preventing almost no airflow. Thank You again, you just saved me from selling my explorer.
15:41 the answer to my problem. You were the only one that had the right answer to my problem. THANKS SO MUCH. 😊
Thank you Very Much Ron !!!
This VIDEO was Exactly what I needed and taking the time to Explain and Educate me on how its fixed and also what the Problem is on how it Broke.GREAT VIDEO AND CAMERA WORK TOO. Again I cant thank you enough, ESPECIALLY GETTING MY WIFE WHO IS ALWAYS HOT, OFF MY BACK. THANK YOU👍🌎✌YOUR FRIEND FROM MASSACHUSETTS TIM THE ELECTRICIAN 🌎✌
Great! This was very helpful 🫂
Seriously, Thank you for taking the time to do this for everyone! I did like and subscribe to say thanks!
I have a 02 ford explorer with 300,000 miles which I absolutely love, but my flap broke so I just screwed it to the open position which is a temporary fix, it works for now
Same exact scenario except I had the six cylinder motor 4.0 l 2003 Ford Explorer and did the exact same thing I screwed that door flapper that was stuck down on the fan to the whatever I could really just screwed it and shut the fresh air side now the fan blows great but I did have to get a new compressor after a little while but major thing is make sure you just get that orifice tube switched when you put in a new compressor I didn't do that and now I need to get that orifice tube replaced
Hey Ron. Here is another issue with these Fords and a lot of vehicles, my car has a total air flow loss every time I hit the gas, because of vacuum leaks in the old air tubes. After spending a day running down every vacuum tube under the hood and under the dash, I found two busted plastic fittings. I expected it to be split tubes, but was simply old hard plastic parts that become fragile with age.
Just did this for a 2004 explorer after removing the screws had to cut vertical on the sides to make a flap to get door out my question is can you just leave it without a door it blows great though thanks
Best video I've seen for this problem .
Thank you! I’m having this problem and it’s getting too hot right now so I’m doing this tomorrow morning, Thanks!
There should be a Recall on this since I’ve seen this happening to too many cars, mine is a 2005 Mercury Mountaineer
Yeah that was very helpful makes a lot of sense
The fact they took out the flap just shows that they make them shitty on purpose
great video
Before you all go taking apart the dash or glove box make sure you go under the hood and check the vacuum lines!
Does doing this affect the heating? Just did this on 04 explorer ac works great now
Very helpful ,and thank you !
Good video!
Thanks just did mine had this problem for years finally fixed:):):)
I made some cuts to get access to the fresh air door without too much damage,then I filled the door hinge with high temp RTV JB weld (on left side) , put the door into position and reached up and pulled the plastic hinge out (left side) then pushed back into the door and let it set for an hour,works great and very little damage to the plastic housing by cutting it with a utility knife,but even after a new blower motor my airflow still sucks,so now I guess I'm working on the blend door!
02 ford explorer xlt
Thanks for this brother, I guess that hour diag should go to you😅
Good info, fortunately not my model.
I think that flap is for adding a cabin air filter...
Doesnt need it on most older fords this one especially since they break after 100k miles
Good video, learned a lot. I have a 2005 Explorer. Did everything mentioned (didn't have the handy dandy service flap) and had to cut my opening with my Dremel. Only to find my door isn't broke. Still very little air flow. It was a good system orientation.
Any suggestions, seriously. The door closes on AC/recirc and I have a screen. One thing I didn't heck was if the screen is plugged. No matter where I put the MODE selector I get defrost. I have ordered a new Dorman switch/selector
It was helpful.
Well explained.
Quick fix...good info👍
Im in Menifee watching!!
muchas gracias exelente video me sirbio mucho bendiciones
Great video.
What is the name of that device and where did you get it at?
Thank you very much
Best video ❤ my car has power hesitation with max a.c on :(
Is it the same setup for a 2004 Crown Vic LX ? I also own a '98 F-150 that has experienced Heater Core Issues ( I will tell you going 65 mph, with the air on and the heater core/blend door fail It is a scary if not down right poisonous thing! I rolled down the windows shut the air off and thankfully got over to the shoulder. People behind me stopped and approached with fire extinguishers because they thought I was on fire!! There actually is a recall on my year heater core and all have to be replaced with brass heater cores. Just a FYI thanks for your vids.
Thank you sir.
nice job thanks
Did you guys ever do a dash removal video?
Any more info on 02 explorer? I had to put that screw in the blower also but I’m still not getting hot air at the defrost but am on the floor
Lol the guy that took the bracket off cut the two ends of the box then pulled side of box up til it snapped. Hello door
Isn't the flap/door for a cabin air filter?
Thx mate
Can you show how air goes to the front window defrost vents???
Its like the dont get corny like dad commercials
Similar thing happened to my '07 Focus.
So now they have no cabin air mode and will be pulling outside air instead of recirculating? Isn't most of the issue going to be a clogged evap core since there's no filter for it?
First off not all trucks had the air filter option. Second the proper repair would have been to remove the entire dash and replace evac box complete. That was not an option for the owner financially.
Is there a flap on a 2015 Explorer ?
Ok I don't have the flapper thing on my 2004 ford explorer xlt v8 so how to I take that part off with out taring apart my dash so I can clean out the mouse nest that is in there? And check to see if my flap is broken....fml.
Without the door, the hot or cold outside air will come out behind the glove box, not good.
Can somebody do a 1993 Ford Explorer same same thing
Cabin air filter door?
Blend door
I believe Che is talking about the access flap. Not the outside/recirculation flap that broke.