You make the best quality tools for rc’s ! I got the hex drivers when I started in the hobby 1 1/2 years ago. They are fantastic. They are holding up very good and I have never stripped a screw or failed to get one loose. I am so glad I didn’t go for the cheaper stuff. I am retired and I use them everyday. Thank you for offering us great American made products!!
Love your products, I rely on your tools everyday and run MIP driveshafts on my rig. I'm saving up to buy a set for my Gatekeeper. They hold up very well to 3s power and I have had no issues with them. I just hit'em with a little W-D 40 gel spray now and then to keep the rust away, and they're good to go. You guys make some good stuff, period.
The hand tools from MIP are a pleasure to use.... Thank you for the insight into your company. This type of manufacturing is very interesting to me. To do it within a realm of a hobby like rc or pocket knives would be quite a unique employment opportunity
I can't stand MIP,I had always used MIP CVD's with all my RC Cars and I purchased a set of CVD's and they didn't come with correct set screws,the set screws were flat bottomed not cupped. The problem with them being flat bottomed was that the drive cup's that went onto the tranny of my Traxxas truck and the drive cup's would slide loose after 20 seconds or so of running because the ends weren't cupped and so they would bite into the output shafts of the tranny according Eustace Moore the owner of MIP. I called MIP to let them know that my drive cup's wouldn't stay on because I didn't know why,the girl who answered the phone put me threw to Eustace Moore and he told me they should have had set screw's with cupped ends,I asked if he could send me the right ones and he asked me why I don't I just go to a hobby shop and get Dubro ones it would be faster,I told him my problem is that I lived in a small part of Ontario Canada where there aren't any hobby shop's and as a matter of fact I didn't know of any because I hardly ever got to a big city. I told Eustace that how I found out about hobby shops and where they were located was threw RC Car Action Magazine and I ordered everything from the states because I couldn't find any shops near me and I was just 16 at the time,back then I think pc's were just starting to run Windows XP and back then nobody was using the Net hardly either for their hobby shop's so for me to find a hobby shop meant a lot of long distance calling,also distance calling back then cost a lot back then in Canada using a landline and daytime rate it end up costing me 50 bucks just in long distance calling this place and that place and not getting anywhere until a found a place that wasn't a hobby shop that had them. You were also rude to me at the end of the call Eustace when I kept trying to tell you that I couldn't find a hobby shop in my area and I had been looking for 2 or 3 years for one and you told me I don't have time for this pidley shit and hung up on,you went from having me as a customer life and instead making me to never want to buy your product's again and to make sure that once my friends got into RC about 4 years later and we found a hobby shop to tell them not to buy your product's because of you dealt with me and your mistake.
Awesome!!!! Thank you MIP for making available one of best tools I own.
I love the MIP tools and recommend them to anyone who will listen and many who wont. Easily the best drivers for RC and Electronic hobbyists.
Two words, The best
You make the best quality tools for rc’s ! I got the hex drivers when I started in the hobby 1 1/2 years ago. They are fantastic. They are holding up very good and I have never stripped a screw or failed to get one loose. I am so glad I didn’t go for the cheaper stuff. I am retired and I use them everyday. Thank you for offering us great American made products!!
Love your products, I rely on your tools everyday and run MIP driveshafts on my rig. I'm saving up to buy a set for my Gatekeeper. They hold up very well to 3s power and I have had no issues with them. I just hit'em with a little W-D 40 gel spray now and then to keep the rust away, and they're good to go. You guys make some good stuff, period.
I'm glad you are still around.
Love my MIP tools!
The hand tools from MIP are a pleasure to use.... Thank you for the insight into your company. This type of manufacturing is very interesting to me. To do it within a realm of a hobby like rc or pocket knives would be quite a unique employment opportunity
This is a great American success story! Thank you for everything that you've done for the RC industry over the years.
Please come out with 4mm & 5mm hex drivers. Thank you sir for great tools
MIP 🇺🇸🇺🇸🇺🇸
I can't stand MIP,I had always used MIP CVD's with all my RC Cars and I purchased a set of CVD's and they didn't come with correct set screws,the set screws were flat bottomed not cupped.
The problem with them being flat bottomed was that the drive cup's that went onto the tranny of my Traxxas truck and the drive cup's would slide loose after 20 seconds or so of running because the ends weren't cupped and so they would bite into the output shafts of the tranny according Eustace Moore the owner of MIP.
I called MIP to let them know that my drive cup's wouldn't stay on because I didn't know why,the girl who answered the phone put me threw to Eustace Moore and he told me they should have had set screw's with cupped ends,I asked if he could send me the right ones and he asked me why I don't I just go to a hobby shop and get Dubro ones it would be faster,I told him my problem is that I lived in a small part of Ontario Canada where there aren't any hobby shop's and as a matter of fact I didn't know of any because I hardly ever got to a big city.
I told Eustace that how I found out about hobby shops and where they were located was threw RC Car Action Magazine and I ordered everything from the states because I couldn't find any shops near me and I was just 16 at the time,back then I think pc's were just starting to run Windows XP and back then nobody was using the Net hardly either for their hobby shop's so for me to find a hobby shop meant a lot of long distance calling,also distance calling back then cost a lot back then in Canada using a landline and daytime rate it end up costing me 50 bucks just in long distance calling this place and that place and not getting anywhere until a found a place that wasn't a hobby shop that had them.
You were also rude to me at the end of the call Eustace when I kept trying to tell you that I couldn't find a hobby shop in my area and I had been looking for 2 or 3 years for one and you told me I don't have time for this pidley shit and hung up on,you went from having me as a customer life and instead making me to never want to buy your product's again and to make sure that once my friends got into RC about 4 years later and we found a hobby shop to tell them not to buy your product's because of you dealt with me and your mistake.