How to Replace Headlights 2006-08 Dodge Ram Truck
HTML-код
- Опубликовано: 6 сен 2024
- Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ia/1ALH...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2002-2009 Dodge Ram 1500.
• Check here for more videos on the 2002-09 Dodge Ram 1500: • Dodge Ram 1500 3rd Gen...
This process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Phillips Head Screwdriver 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Socket Driver
Subscribe: / @trq
Check out our playlist:
Dodge Ram 1500 3rd Generation 2002-09: • Dodge Ram 1500 3rd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Take this video down! It’s missing a crucial step- 10mm nut on the back side of the light
You forgot to mention the third 10mm nut on the back side of the fender well.
+jose saenz Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
@@TRQ Ya, right after I break off the mount... 8mo later, dimwits
My 1st time messing with Anything on my truck and found this video to be straight forward and simple... so I thought...It took me 30 mins to find out about the 3rd bolt in the wheel well. Almost broke my housing because I thought it was just stuck. But I got it... no thanks to trq 🤔
+Big Serg ##onbaby Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
And also, if you let that 3rd bolt in the wheel well drop, the truck was engineered to trap that bolt in a very deep crevice and you’ll spend the next 35 minutes looking for it (on two separate occasions). Use rags or a magnet to assist when removing and say a prayer. It also helps if it’s not 120° F in Phx AZ when this happens.
Yeah first thing i noticed is doesny show wheel well third bold under rubber garmet..
READ THE COMMENTS: Almost damaged my truck because of this video. Glad I read the comments. There is a 10mm nut in the fender well covered up by a rubber dust plug that needs to come out!
I agree with those that pointed out the third 10mm nut that can only be accessed by removing the rubber plug in the wheelwell. Impossible to safely remove the headlight assembly without removing this nut.
Also, is there a left/right adjustment on these headlights? My right headlight shines too far to the left.
I should have read the comments...the third bolt is missing from back ...
Thank you for this service, helped me immensely.
Where is located the Ambient Temperature Sensor located on 2008 Dodge 1500?
MAYBE YOU SHOULD TELL PEOPLE FROM FACTORY THERE IS A NUT ON THE REAR UNDER WHERE YOU PUT YOUR WEDGE SO THEY DONT BREAK IT AND HAVE TO REPLACE THE WHOLE THING BECAUSE OF A HOW TO THAT ISNT FULLY CORRECT.
The video also misses the plastic snap in socket (?) for upper ball stud(?). In the video you can clearly see the old socket in place and the new socket on the new assembly as he installs it. Yet he easily pops the new assembly in place.
Very poorly produced video.