Excellent explanation of the the software and I've had a hard time finding a good tutorial on how to set up output routing. I have a Clarett 4Pre and have not been able to figure out how to reamp by sending audio to output 3. Based on your tutorial, I think I understand how to do so. Nice work and thank you!
Hi and thanks for the video. Where can I download this controller? Looks like they removed it from the Focusrite website. I have two Focusrite Pro 40s that I want to link together. Thank you, Jamie :)
Hey Jamie, if you’re looking to get Focusrite Control….go to the Focusrite site-->scroll all the way to the very bottom--> click downloads--> select whichever model/generation you have and you should find the DL links. 👍👍👍 - BUT….if by ‘Focusrite Pro 40’ you mean Sapphire Pro 40, it looks like you can just click on the Sapphire models and find the Pro 40 from there. At that point, you’de be using something called Sapphire Mix Control instead of what I’m using, Focusrite Control. I hope this helps, let me know!
18:30 - So I just got the 18i20 and for now plan to use it in standalone mode to mic all my drums and output everything to line 1-2 which will then go to another drum interface w/ midi (Yamaha EAD10) and then from there to my PC. So basically for each line output would need to change custom mix to playback 1-2? It'll just be sent as stereo which is fine. I talked to their customer service and they did say this is possible and that settings in this control panel will save to Focusrite's memory. Just wanted to confirm this is how to do it.
I have firmware 1653 and I don't see the same options when I go to settings. All I have is, the sample rate menu and monitor controls menu.... HELP!!!!!
I can hear the synths that are connected to my mixer but I can't hear anything via my Windows desktop. I have my speakers connected to the mixer directly and then I used cables to connect the mixers aux 1 out and aux 2 out into the back of my 8i6 focusrite where it displays "input 3 and 4". I do not understand how to fix this issue after watching this video for some reason. Help anyone? 😅
I have a clarett 2pre thunderbolt 😢 after updating my max to Sonoma my interface won’t work. I have installed the drivers did everything their website says, and it won’t work now I gotta buy a new interface. 😅
Hey! I'm using a 3rd generation interface but it looks like your 2nd generation will also work with Focusrite Control :). 1st generation users are out of luck with FC but seems to use something called 'Scarlett Mix Control' instead. Here is the link where I found that info: support.focusrite.com/hc/en-gb/articles/115001661729-No-Hardware-Connected-or-No-Hardware-Detected#:~:text=Please%20note%2C%20Focusrite%20Control%20will,Scarlett%20Solo%2C%202i2%20and%202i4
@@deepzepp4176 ok yea, just looked at the manual for your 2nd Gen 2i2. Seems like there's no software download at all...only if you use a windows computer would you have to install drivers...on a Mac, nothing to download...just plug and play basically and your computer would automatically recognize it. I think since it's a pretty basic model interface FR didn't find it necessary to include any software for routing.
😂…well, you could just plug and play as long as you’ve installed it and not worry too much about the extra stuff. This vid is really for those who want to get a basic working knowledge of FC and get the most out of their interface. 👍👍👍
@@ThisIsTorch ...and this is an unfortunate little detail that is left out of the videos I've seen on FC... --that if you are using it in a home studio with a DAW and outboard gear/mics/instruments/etc, you dont really need it. If anything, you need to mute it so you arent getting duplicate signals from this AND your DAW. No wonder people hate this program. It provides functionality that the target market doesnt need... who is using this in a million dollar studio w/a separate control room? Any podcasters using this for their show? Is this a go-to option for streamers? I don't know, but I would think there are better options for all three, and that most people use it for home studio, in which case you they dont really need any of this. But figuring out you dont need it was difficult for me, because no one really explains anything beyond menu functionality and mixer presets. After watching half a dozen videos I was still scratching my head wondering why I need a mixer program when Ive got gain knobs on the interface and a mixer in my DAW. So if anyone reading has the same question, the answer is: you dont. Make sure you output to DAW and mute everything else.
@@kitchenspider I hear ya brother. I can see how all this would seem like overkill or unnecessary in an actual studio situation…Again, this vid is for people, most likely indie musicians, who want to get the most out of their FR interface. I can tell you my personal reasons for getting the model I got as well as needing to understand the software…and the reason is, I am a drummer and producer working independently looking for lots of inputs and outputs for recording on a budget (as well as live performance - I do a lot of triggering using Ableton Live so outputs are a must) for various indie projects etc. So for anyone like myself who needs all the stuff to accomplish the job, it isn’t overkill but totally necessary. Simpler models have too many limitations for what I’m personally trying to do. Understanding the software becomes fundamental for my personal usage and FC helps give lots of flexibility in terms of routing while using a DAW in both home recording and live performance…and if you understand how to use it, you can absolutely mute things as needed. Hence why I created the video to help others who are looking to either do similar things or just simply want more understanding of the software. In the end it’s all about your personal use case. Anyone running a million dollar state of the art recording studio is not likely to use these interfaces, let’s be honest.
@kitchenspider this was helpful. I've been wondering what I'm doing wrong with FC or how it actually comes in handy. I had everything set up and working, but was not sure how to use FC/ its use. Now I just have to figure out to mute it like you suggested
@@kitchenspiderhi mate, I can really relate to what you are saying. I got the Scarlett 18i20 to use with my Quadraverb… the idea was to route audio from ableton into my Scarlett into the Quadraverb and back through the Scarlett into my DAW again. In theory this seems like it’s very simple to do but I just can’t get it to work. Do you have any advice for how I go about running this setup? Cheers :)
By Far the worst piece of software from any audio developer I have ever used. I am right now considering returning it due to how bad it is. Barring the faders taking 30 seconds to fade, the lack of ability to route audio from your daw when using focusrites asio to the system mixer on windows has to be the most ridiculous design i have ever seen.
Shot Torch I use FC with the Clarett interface, man now i understand my Focusrite control Cheers bro,awesome
Hey man, Super happy this was helpful for you and thanks for watching! 🔥👊🔥
Great, tutorial to get folks started, much appreciate this very much!!!
Excellent explanation of the the software and I've had a hard time finding a good tutorial on how to set up output routing. I have a Clarett 4Pre and have not been able to figure out how to reamp by sending audio to output 3. Based on your tutorial, I think I understand how to do so. Nice work and thank you!
Hey man! So glad this helped you out 🙌🙌🙌
I have just found out the same! Great tutorial. Thanks.
🙏🙏🙏
Hands down, this is THE best quick start tutorial for the 18i20 that I have found! Well done! Thank you!
KILLER tutorial. You just unlocked what was holding me back!
Thank you for this very informative information just what I was looking for
Perfect! So glad it helped you out! 🙌🙌🙌
thanks
Excellent video, you're talking at a good pace for stuff this technical. A+++++++++++++++
Hey thank you! I appreciate the feedback - I was hoping to make it informative and easy to understand. 🙌🙌🙌
Hi,
Great video, thanks!
I have 3 microphones but I can’t get anything out from the line outputs!
Very helpful 👍 Focusrite Control is a pain to work with.
Hi and thanks for the video. Where can I download this controller? Looks like they removed it from the Focusrite website. I have two Focusrite Pro 40s that I want to link together.
Thank you,
Jamie :)
Hey Jamie, if you’re looking to get Focusrite Control….go to the Focusrite site-->scroll all the way to the very bottom--> click downloads--> select whichever model/generation you have and you should find the DL links. 👍👍👍 - BUT….if by ‘Focusrite Pro 40’ you mean Sapphire Pro 40, it looks like you can just click on the Sapphire models and find the Pro 40 from there. At that point, you’de be using something called Sapphire Mix Control instead of what I’m using, Focusrite Control. I hope this helps, let me know!
18:30 - So I just got the 18i20 and for now plan to use it in standalone mode to mic all my drums and output everything to line 1-2 which will then go to another drum interface w/ midi (Yamaha EAD10) and then from there to my PC. So basically for each line output would need to change custom mix to playback 1-2? It'll just be sent as stereo which is fine. I talked to their customer service and they did say this is possible and that settings in this control panel will save to Focusrite's memory. Just wanted to confirm this is how to do it.
I have firmware 1653 and I don't see the same options when I go to settings. All I have is, the sample rate menu and monitor controls menu.... HELP!!!!!
I can hear the synths that are connected to my mixer but I can't hear anything via my Windows desktop. I have my speakers connected to the mixer directly and then I used cables to connect the mixers aux 1 out and aux 2 out into the back of my 8i6 focusrite where it displays "input 3 and 4". I do not understand how to fix this issue after watching this video for some reason. Help anyone? 😅
I have a clarett 2pre thunderbolt 😢 after updating my max to Sonoma my interface won’t work. I have installed the drivers did everything their website says, and it won’t work now I gotta buy a new interface. 😅
Is this for 2nd gen Scarlett as well?
Hey! I'm using a 3rd generation interface but it looks like your 2nd generation will also work with Focusrite Control :). 1st generation users are out of luck with FC but seems to use something called 'Scarlett Mix Control' instead. Here is the link where I found that info: support.focusrite.com/hc/en-gb/articles/115001661729-No-Hardware-Connected-or-No-Hardware-Detected#:~:text=Please%20note%2C%20Focusrite%20Control%20will,Scarlett%20Solo%2C%202i2%20and%202i4
@@ThisIsTorch Thanks so much for the link, much appreciated. But I’m still out of luck as I have a 2i2 which I don’t think it supports.
@@deepzepp4176 ok yea, just looked at the manual for your 2nd Gen 2i2. Seems like there's no software download at all...only if you use a windows computer would you have to install drivers...on a Mac, nothing to download...just plug and play basically and your computer would automatically recognize it. I think since it's a pretty basic model interface FR didn't find it necessary to include any software for routing.
Awesome, so where is the button to turn all this extra garbage off so I can just use the interface? 😅
😂…well, you could just plug and play as long as you’ve installed it and not worry too much about the extra stuff. This vid is really for those who want to get a basic working knowledge of FC and get the most out of their interface. 👍👍👍
@@ThisIsTorch ...and this is an unfortunate little detail that is left out of the videos I've seen on FC... --that if you are using it in a home studio with a DAW and outboard gear/mics/instruments/etc, you dont really need it. If anything, you need to mute it so you arent getting duplicate signals from this AND your DAW. No wonder people hate this program. It provides functionality that the target market doesnt need... who is using this in a million dollar studio w/a separate control room? Any podcasters using this for their show? Is this a go-to option for streamers? I don't know, but I would think there are better options for all three, and that most people use it for home studio, in which case you they dont really need any of this. But figuring out you dont need it was difficult for me, because no one really explains anything beyond menu functionality and mixer presets. After watching half a dozen videos I was still scratching my head wondering why I need a mixer program when Ive got gain knobs on the interface and a mixer in my DAW. So if anyone reading has the same question, the answer is: you dont. Make sure you output to DAW and mute everything else.
@@kitchenspider I hear ya brother. I can see how all this would seem like overkill or unnecessary in an actual studio situation…Again, this vid is for people, most likely indie musicians, who want to get the most out of their FR interface. I can tell you my personal reasons for getting the model I got as well as needing to understand the software…and the reason is, I am a drummer and producer working independently looking for lots of inputs and outputs for recording on a budget (as well as live performance - I do a lot of triggering using Ableton Live so outputs are a must) for various indie projects etc. So for anyone like myself who needs all the stuff to accomplish the job, it isn’t overkill but totally necessary. Simpler models have too many limitations for what I’m personally trying to do. Understanding the software becomes fundamental for my personal usage and FC helps give lots of flexibility in terms of routing while using a DAW in both home recording and live performance…and if you understand how to use it, you can absolutely mute things as needed. Hence why I created the video to help others who are looking to either do similar things or just simply want more understanding of the software. In the end it’s all about your personal use case. Anyone running a million dollar state of the art recording studio is not likely to use these interfaces, let’s be honest.
@kitchenspider this was helpful. I've been wondering what I'm doing wrong with FC or how it actually comes in handy. I had everything set up and working, but was not sure how to use FC/ its use. Now I just have to figure out to mute it like you suggested
@@kitchenspiderhi mate, I can really relate to what you are saying. I got the Scarlett 18i20 to use with my Quadraverb… the idea was to route audio from ableton into my Scarlett into the Quadraverb and back through the Scarlett into my DAW again.
In theory this seems like it’s very simple to do but I just can’t get it to work. Do you have any advice for how I go about running this setup? Cheers :)
I can’t get my SMB7 connected
By Far the worst piece of software from any audio developer I have ever used. I am right now considering returning it due to how bad it is.
Barring the faders taking 30 seconds to fade, the lack of ability to route audio from your daw when using focusrites asio to the system mixer on windows has to be the most ridiculous design i have ever seen.