While repairing/restoring the threads of studs and bolts which are filled with corrosion, it helps to run a wire brush over the threads to clean them out. Once that's done, place a few drops of light oil on the threads. This will reduce friction as you run the restoration die or Threadmate over the threads.
poisonfangs85 Nice....glad that I could help. This is not the one & only tool you may need....but it definitely can work in certain situations where nothing else will.
Steve Rob Haha....well, I knew that it would fix them.....I have used this unit for over a year, but I figured seeing it doing something would be a lot better than just hearing me talk about it ;)
Great review. It's another one of those things I don't need very often, but wish I had one when I do need it. I think it's about time that I look into getting one as well as their internal thread repair tool. Keep up the good work. Your videos are always concise and informative.
Looks good. It seemed, when you were repairing the anchor threads, that some metal was removed by the tool as well. There were some threads showing in the video in a few of the cut segments. Can you confirm that a little material was taken off of the heavily peened areas of the thread?
mausball Yes that is correct. Thread restorers will clean out threads of foreign material, push the damaged metal back into the correct position, and in that case of that anchor (with some threads smashed flat) the cutting edge of the blades will completely remove it in order to make the bolt/anchor/stud useable again. In the cases of extremely damaged threads...there is just no way around that. Good observation!
For just cleaning threads, and getting what ever built up material is in there. Would a bench grinder with a wire wheel be the best choice? These tools are nice but as for cleaning them my bench grinder does a great job bring it to bright new metal in a matter of seconds
Steven Kasanders Oh yeah.....my idea when doing reviews on smaller tools like this, would be the guy that doesnt already have a huge setup & is looking for how a specific tool may work that he is checking out at a store/online. A grinder with fine wire wheel is the best for cleaning any bolts/rusty tools/etc, its just that many people dont have them.....or even have the bench space for them. The main selling point to any of these thread restorers is going to be fixing damaged threads....the cleaning them out part would be an added bonus. Good idea! Thanks for commenting!
Steven Kasanders I would get the Craftsman kit I reviewed.....it covers internal & external threads. The Threadmate only works with external (so you cannot use it to chase holes) & you have clearance issues. I do use it, but no where near as often as my Craftsman 48-pc set.
Tee Giang Thanks! I thought the same thing, but the packaging did not say to add cutting fluid. I am certain it WILL prolong the life of the blades, but I did not add that in there since they didnt specify. Good observation!
Great video! Looks like a handy tool. They run about $36.00 on Amazon. Do you believe this price is warranted if one is already equipped and familiar with a standard tap and die set? Looks really convenient, but between you and Tools in Action taking large chunks of my money already i've got to either start budgeting or get a third job. Thank you for uploading!
Robert Johnson Thanks Robert! I think the $36 with free s/h is a good price....Sears has the Craftsman rebranded one for $30....but after gas & your time, I dont see the $6 savings as being a selling point. I actually got this unit from Sears when they transitioned the Threadmate brand out & the Sears rebrand in (same unit...different colors). I think it actually works exceptionally well & is a good thing to have around the garage. Here is the Sears version --- www.sears.com/craftsman-cm-universal-external-thread-repair-tool/p-00938948000P
Probably. For the simple fact that it's able to repair threads damaged at the very end of the bolt where a die won't be able to get started. This is quite common. I may get on of these
Real Tool Reviews Alright, you sold me. Your Deity of choice help you though if the thing doesn't magically stay locked in place when I squeeze it on there though!
Chris Maguire Do you mean the thumbwheel ratchet? Here they are on Amazon --- www.amazon.com/GearWrench-81222-Thumbwheel-Ratchet-4-Inch/dp/B001M0O1B6?_encoding=UTF8&tag=reatoorev-20
I have a dirtbike that has really bad crunched up threads on the crank I mean there's peaces of the threads that are gone so I think that will be the true test bc I baught one like that but red color hope she pulls thru so I can ride again but idk bc I have a big bike talking about a yz426f here but hope this tool and a new key for the magneto and red lock tight will do the trick along with new nut cheers wish me luck
While repairing/restoring the threads of studs and bolts which are filled with corrosion, it helps to run a wire brush over the threads to clean them out. Once that's done, place a few drops of light oil on the threads. This will reduce friction as you run the restoration die or Threadmate over the threads.
I'm sold. I have needed something like this on many jobs that required anchor bolts.
poisonfangs85 Nice....glad that I could help. This is not the one & only tool you may need....but it definitely can work in certain situations where nothing else will.
Impressed me - I bet you thought the threads were buggered for sure with so many hits with the hammer :). Now I have to try and find it.
Steve Rob Haha....well, I knew that it would fix them.....I have used this unit for over a year, but I figured seeing it doing something would be a lot better than just hearing me talk about it ;)
Really impressive. Didn't think it would work that well. Great video!
TheFlamingChalupa Thanks! I am glad you liked the ways I showed it working :)
What an excellent little tool that is and a really great video! Thanks for all you do brother! ❤️🛠
Great review. It's another one of those things I don't need very often, but wish I had one when I do need it. I think it's about time that I look into getting one as well as their internal thread repair tool. Keep up the good work. Your videos are always concise and informative.
Mike L. Thanks Mike! And you are correct...it is one of those tools you dont think about until you are stuck with a damaged bolt!
Sure miss your videos
They make the exact same thing made in Israel branded as craftsman for about 20 bucks if you get it on sale, works great.
Looks good. It seemed, when you were repairing the anchor threads, that some metal was removed by the tool as well. There were some threads showing in the video in a few of the cut segments. Can you confirm that a little material was taken off of the heavily peened areas of the thread?
mausball Yes that is correct. Thread restorers will clean out threads of foreign material, push the damaged metal back into the correct position, and in that case of that anchor (with some threads smashed flat) the cutting edge of the blades will completely remove it in order to make the bolt/anchor/stud useable again. In the cases of extremely damaged threads...there is just no way around that. Good observation!
For just cleaning threads, and getting what ever built up material is in there. Would a bench grinder with a wire wheel be the best choice? These tools are nice but as for cleaning them my bench grinder does a great job bring it to bright new metal in a matter of seconds
Steven Kasanders Oh yeah.....my idea when doing reviews on smaller tools like this, would be the guy that doesnt already have a huge setup & is looking for how a specific tool may work that he is checking out at a store/online. A grinder with fine wire wheel is the best for cleaning any bolts/rusty tools/etc, its just that many people dont have them.....or even have the bench space for them. The main selling point to any of these thread restorers is going to be fixing damaged threads....the cleaning them out part would be an added bonus. Good idea! Thanks for commenting!
Yes I agree, would you recommend the threadmate or the craftsman thread restore kit if you, we're gonna get just one for your mechanics box?
Also I appreciate you commenting back to everyone, very very cool and nice of you!
Steven Kasanders I would get the Craftsman kit I reviewed.....it covers internal & external threads. The Threadmate only works with external (so you cannot use it to chase holes) & you have clearance issues. I do use it, but no where near as often as my Craftsman 48-pc set.
Steven Kasanders Thanks Steven! I appreciate you taking the time to watch my videos, comment on them, and for subscribing! :)
I just bought one from Sears for 29 dollars. It’s exactly the same as the one shown in the video
soo awesome! they dont recommend any cutting oil and are the blades made of carbide?
Tee Giang Thanks! I thought the same thing, but the packaging did not say to add cutting fluid. I am certain it WILL prolong the life of the blades, but I did not add that in there since they didnt specify. Good observation!
Seems the replacement blades cost as much as the whole unit
Great review and info.
Cody Robertson Thanks Cody!
Great video! Looks like a handy tool. They run about $36.00 on Amazon. Do you believe this price is warranted if one is already equipped and familiar with a standard tap and die set? Looks really convenient, but between you and Tools in Action taking large chunks of my money already i've got to either start budgeting or get a third job. Thank you for uploading!
Robert Johnson Thanks Robert! I think the $36 with free s/h is a good price....Sears has the Craftsman rebranded one for $30....but after gas & your time, I dont see the $6 savings as being a selling point. I actually got this unit from Sears when they transitioned the Threadmate brand out & the Sears rebrand in (same unit...different colors). I think it actually works exceptionally well & is a good thing to have around the garage. Here is the Sears version --- www.sears.com/craftsman-cm-universal-external-thread-repair-tool/p-00938948000P
Probably. For the simple fact that it's able to repair threads damaged at the very end of the bolt where a die won't be able to get started. This is quite common. I may get on of these
Kimo Kalihi Awesome! Thanks Kimo, glad I could help!
Real Tool Reviews Alright, you sold me. Your Deity of choice help you though if the thing doesn't magically stay locked in place when I squeeze it on there though!
Robert Johnson Must be that "magic of video" I keep hearing about Robert ;)
Will this handle an external thread of 3/4"? The description says it's good to 11/16", which is just shy of 3/4.
Wow that's impressive great review thank you
Felix Elizondo Thanks Felix!
Thread Pitch?
That's perfect for corroded tie rod ends!!!
Made in Israel? Huh I didn't know they made anything...either way, pretty awesome product...I may get one...and great review as always
bighunterman77 Thanks bighunterman!
What was the socket tool you were using?
Chris Maguire Do you mean the thumbwheel ratchet? Here they are on Amazon --- www.amazon.com/GearWrench-81222-Thumbwheel-Ratchet-4-Inch/dp/B001M0O1B6?_encoding=UTF8&tag=reatoorev-20
nice job
George S Thanks George! I appreciate it!
I have a dirtbike that has really bad crunched up threads on the crank I mean there's peaces of the threads that are gone so I think that will be the true test bc I baught one like that but red color hope she pulls thru so I can ride again but idk bc I have a big bike talking about a yz426f here but hope this tool and a new key for the magneto and red lock tight will do the trick along with new nut cheers wish me luck
Very cool and not bad for32$
Eric DuPlantier I agree....the first time you have to fix something on a vehicle --- the time you save alone will pay for it!