Это видео недоступно.
Сожалеем об этом.
Cleaning RAM modules and slots - on an old PC | TechieShow
HTML-код
- Опубликовано: 13 мар 2020
- I recently had a problem with an older system (first generation i7, so pretty old) and I thought this might interest some of you guys out there :)
Thank you for watching! Don't forget to subscribe for more content like this!
So, sometimes you insert a used memory stick into your motherboard and it fails to POST. I’m talking about RAM that has been used. Maybe you got it from an old machine or something like that. For new ram sticks, this does not apply as the contacts are probably fine/clean.
Please be aware that this will not fix a faulty memory stick. It will only help if that ram module has dirty contacts. It just happens in some cases and cleaning them helps a lot.
So, sometimes some corrosion builds up on the RAM’s pins. And that might lead to problems/errors. If this is your case, you can clean these with a little bit of patience.
It’s probably a good idea to blow some air with a compressed air can into the ram slots to make sure everything is clean over there too. Especially if some slots have been sitting empty for a while and your pc has some dust built up.
As far as cleaning Ram slots, after unplugging the pc, pressing the power button for a couple of seconds and waiting over 1h to let the capacitors dissipate their charge, I would moisten a memory module with a bit of 95% purity or better rubbing alcohol and insert/remove the module from the slot a couple of times. Then blow air again, wait for everything to dry properly and the alcohol to evaporate and try using the slot again.
DO THIS ONLY IF YOU REALLY NEED TO. I don’t like ‘prevention’ cleaning ram slots or PCI-E slots. The pins inside are quite easy to ruin.
Thanks for watching how to clean RAM and RAM slots.
Here are a couple of other cool videos:
- NAND SLC TLC MLC QLC - what to choose? • NAND SSD SLC MLC TLC ...
- Bottlenecking: • BOTTLENECK - what is i...
Like my content?
There are multiple ways you can support the creation of more content!
Like the video!
Subscribe to the channel!
Share the video with your friends!
Consider becoming a Patron: / techieshow
Buy me a coffee: www.buymeacoff...
Signup for a Hetzner server using my link and save €20: hetzner.cloud/...
Hey! Thanks for watching!
Subscribe for more interesting content like this!
Two thumbs up! I didn't know you can also clean it with alcohol.
For the longest time, I've been using the eraser method which I really hated.
hello short circuit happened after cleaning the PC using a blower it seems some of the dust went inside the ram slots I tried the rams on the other PC it worked fine
I have an old DDR2 laptop ram it used to work but now my laptop won't works its got a beep sound also after I tried the eraser method it works but few weeks later its back to beeping when i switch on it. I'll try your step!! Thanks
4:11 hahahahah short that shit out.. you legend
Thanks. I easily have access rubbing alcohol but isopropyl alcohol is apparently banned
it’s the same thing
@@wolfofmortis818 Not necessarily. I think I have access to the 'wintergreen' variant of rubbing alcohol, so it has additional ingredients so I'm not sure if it's good for electronics. Fortunately I got my hands on some electrical contact cleaner which should work fine.
@@jackkraken3888 Ah ok.
Thanks for the video. Learnt for the first time that there are methods other than that eraser which my engineer used to use it to clean it.
I had a POST issue, cleaned it with rubber as I saw your video after the cleaning. If that thing happens again, I am going with your method.
Erasers will definitely remove the gold coating. Bad idea.
I have problem with my ram slot, which make me can't install my new RAM. WTF
Dose this help with hdmi because the signal doesn’t go to my monitor but my pc works
As far as I know no. It's very rare that dirt can get into your HDMI plug. Check the connections or even try swapping the cable with another one.
Did you ever find a fix? im having this exact issue
@@Gensis it turned out I was plugging the hdmi into the graphics card hdmi so if your pc has multiple ports for hdmi try them all
Bhai mere PC me ram ki problem hai.
Bhai ram lagata hu to 2 minute chalta hai fir koi ek perticular color aata hai or PC bhi band nahi hota
Please koi batao Kya problem hai.
1-2 minute chalta hai fir koi color aajata hai please help me 😭😭🙏🙏🙏
What about slot cleaning?
Great idea! I'll make a video about it soon :-D
Thank you for the suggestion!
Thanks!!
Get 100 subscriber is hard you need to work hard so keep it up 👍👍
And hope you get 100 subscriber in 2020
Please dont use any kind of liquid because it will likely destroy the ram
Haven't had any problem with any RAM type & rubbing alcohol preferably >70%. Of course, you just put a little on a Q-tip and wait for it to dry after rubbing the contact pads (just the contact pads not the whole memory stick). But this is the last resort thing anyway, to at least try to make it boot. A memcheck run is still needed of course.
Bhai mere PC me ram ki problem hai.
Bhai ram lagata hu to 2 minute chalta hai fir koi ek perticular color aata hai or PC bhi band nahi hota
Please koi batao Kya problem hai.
1-2 minute chalta hai fir koi color aajata hai please help me 😭😭🙏🙏🙏