That fitment looks absolutely insane, I’d be scared of the fender bite on high camber turns though. Hopefully a solid -3 to -3.4° camber takes care of that! What tires are these and size? I’ve been looking at a set of RT660s. 275/35R18 all the way around, I like how your sidewall looks here.
I was around -1.6 without the camber plates. Dialed it in another degree with the recently installed plates so sitting around -2.5 up front or so. Getting an alignment in a few weeks so could sway a bit, but it's where I'd like to be overall. Tires are rt660's 275/35 and 295/30.
Seeing you do the F150 oil change makes me grateful BMW has made the process a lot easier for our N55 and S55 models. No need to remove the skid plate and the oil filter sits at the top of the engine, very minimal mess. I spend more time jacking the car and setting up the jack stands if anything. Can't say the same about B58/S58 though LOL. For the oil filter on the truck, I've seen some techs use a flexible sheet that they mold into their own version of a funnel so the oil goes in the direction they want back into the collection pan vs all over the chassis.
I hope when you can finally take it out, I will definitely like to hear about any additional MVH with the Millway Camber Plates. That is most likely my choice of camber plates for my e46 touring if they happen not to be too far off from stock in terms of MVH... your word would have me sold as your vision with your F80 Aligns so well with me vision, Comfortable, OEM Plus, Tasteful, Overall Less is More to achieve this kind of aesthetic!
I’ll be sure to update everyone once I get the car realigned and squared away. Want to make sure I give everything a fair chance and some seat time before I give my feedback. As far as overall quality and install, 10/10. FWIW, I didn’t hear any additional noises moving in and out of the garage at all.
Do you have any concern for sticky tires with poke flinging rocks along the side of the car? Might be worth a PPF in the high impact areas. Looks great man!
What year and what was the mileage when you picked it up? I've been eyeing a 2017 M3C, same color as yours with 65k miles. My 2020 M2C currently has 15k miles, so my wife will not let me trade it in. 😪😢😭
Saved you time going to the dealer/shop. Having others do the work for you and not knowing if it was done right. And yes even money if you can source the materials cheaper that are needed.
I don’t believe that’s the correct way to look at it. I too would have done the same when I didn’t have it. Accomplished that goal and enjoying it now. Very thankful for it. But you can’t keep things because it’s others peoples dreams. I have dreams as well and in order to get there, you have to move through other goals and dreams.
@@Autofreakgarage I agree with you. But still I don't know if a G80 or a GT3 would make you happier. You had the same goal with the BBS E88s, although it didn't fit the car. The setup what you have now is miles better! The E88 setup was an achievement for you because they call if the holy grail of BBS, but still...You know what I mean? I would also have a GT3 near my F82, but I don't know if the GT3 would make me happier. And I've been an F82 owner for 2.5 years now.
Beautiful car 😮 this is perfection
That suspension didn't drop one mm when you sat in it... wow!
Those wheels suit the car/colour perfectly!
Man the RIA are sitting perfectly, outdid yourself with this build
Got the same set up with my F150 and m4! Happy to see it's the perfect two car set up.
Best 2 car solution!
Wow the M3 is low but the wheel fitment is money! Great Job!
I like the RI-A's! personally I love to see FI-R's but your fitment and color combo is crazy nice!😍
GTS hood is gonna look insane
I agree! Cant wait to get that piece on the car.
@Autofreakgarage ❤️🔥❤️🔥❤️🔥🙏
Car looks so aggressive. Love it
Funny, I watch your videos for what you do to the F150. But Man, your F80 is an absolute stunner!
Your daily for the m3 is much nicer than mine, i drive a prius so the m3 can sit in a garage 🤣
Whatever works!
I pisses me off, how perfect that Spec is. It’s literally flawless
F80 looks perfect
Ah the good ol’ abyss. I’ve lost a many a nuts bolts and countless 10mm sockets to the abyss
Poor one out for all the lost homies 🍺
That fitment looks absolutely insane, I’d be scared of the fender bite on high camber turns though.
Hopefully a solid -3 to -3.4° camber takes care of that!
What tires are these and size? I’ve been looking at a set of RT660s. 275/35R18 all the way around, I like how your sidewall looks here.
I was around -1.6 without the camber plates. Dialed it in another degree with the recently installed plates so sitting around -2.5 up front or so. Getting an alignment in a few weeks so could sway a bit, but it's where I'd like to be overall.
Tires are rt660's 275/35 and 295/30.
11 out of 10 bud😊
Seeing you do the F150 oil change makes me grateful BMW has made the process a lot easier for our N55 and S55 models. No need to remove the skid plate and the oil filter sits at the top of the engine, very minimal mess.
I spend more time jacking the car and setting up the jack stands if anything. Can't say the same about B58/S58 though LOL. For the oil filter on the truck, I've seen some techs use a flexible sheet that they mold into their own version of a funnel so the oil goes in the direction they want back into the collection pan vs all over the chassis.
Haha thankfully I’ve done this oil change so many times I know exactly where it comes out. But not a bad idea making a funnel to direct it.
That f80 🔥🔥🔥🔥 so clean.
Funny coincidence, you also reminded me I need to order those small cowl cover pieces
I hope when you can finally take it out, I will definitely like to hear about any additional MVH with the Millway Camber Plates. That is most likely my choice of camber plates for my e46 touring if they happen not to be too far off from stock in terms of MVH... your word would have me sold as your vision with your F80 Aligns so well with me vision, Comfortable, OEM Plus, Tasteful, Overall Less is More to achieve this kind of aesthetic!
I’ll be sure to update everyone once I get the car realigned and squared away. Want to make sure I give everything a fair chance and some seat time before I give my feedback. As far as overall quality and install, 10/10. FWIW, I didn’t hear any additional noises moving in and out of the garage at all.
Perfect example for an m3 ❤
Man that thing is clean!
The stance is on point !!
We need a build list plus cost in one video🙏 ❤
Haha I have that video on the docket. It’ll be a long one!
You have balls running that thing slammed like that on NJ roads. I'm in south nj (cherry hill) and gave up on slamming my cars. Looks amazing though.
Perfect fitment🔥
Do you have any concern for sticky tires with poke flinging rocks along the side of the car? Might be worth a PPF in the high impact areas. Looks great man!
Car is 90% ppf’d already
@@Autofreakgarage smart man, thanks!
F80 looks beautiful man !
To me the F80 the last of the good looking M3/4’s.
Car looks amazing 👌
I love the car and the garage 🔥
What car cover are you using?
Will it work for the M4?
Car looks amazing!
Yes. Same cover fit on my STI, a g80 m3, my f80, and a gt3. Link is in the description for it.
any reason for going syn blend instead of a higher quality full sys? Found your channel while looking at Stis
3.5 Ecoboost requires the blend from the factory, so that’s what I use.
I drive a green KIA Soul while my C63S sits during winter/bad weather
Hell yeah! Gets the job done.
I used to be an 1M and OG M2 owner. Just seeing how good yours look when done right makes me want an F80( Last of the good looking M3/4)
What year and what was the mileage when you picked it up?
I've been eyeing a 2017 M3C, same color as yours with 65k miles.
My 2020 M2C currently has 15k miles, so my wife will not let me trade it in. 😪😢😭
2018 with 18k miles
@Autofreakgarage Thanks!
gas lid sent for a paint match or wet carbon?
Paint match for the OEM GTS hood. I mention that in the video.
🔥🔥
Sick!
Te’s all day.
Mamamiaaaaa. ❤
clean
Like the TE's better but these are cool
They were cool until everyone started running them.
I don’t understand why you would say it save you money when the supplies cost more then me going to the dealership paying $45
Saved you time going to the dealer/shop. Having others do the work for you and not knowing if it was done right. And yes even money if you can source the materials cheaper that are needed.
People would sell their kidneys to have an F80 like yours and you wanna sell it?! 😂
I don’t believe that’s the correct way to look at it. I too would have done the same when I didn’t have it. Accomplished that goal and enjoying it now. Very thankful for it. But you can’t keep things because it’s others peoples dreams. I have dreams as well and in order to get there, you have to move through other goals and dreams.
@@Autofreakgarage I agree with you. But still I don't know if a G80 or a GT3 would make you happier.
You had the same goal with the BBS E88s, although it didn't fit the car. The setup what you have now is miles better! The E88 setup was an achievement for you because they call if the holy grail of BBS, but still...You know what I mean? I would also have a GT3 near my F82, but I don't know if the GT3 would make me happier. And I've been an F82 owner for 2.5 years now.
She beautiful
Looking good ❤