FAP or Dpf fluid cleans the particulate filter by changing the temperature at which the trapped soot burns off. Adblue changes the nitrogen dioxide in the exhaust gasses to carbon dioxide and water vapour (I think!) So two different systems working side by side.
Ik heb het bij misteroil besteld. De vulslang zat er bij. De kleur van de tankring geeft aan welk type eolys er in moet. De variant die ik gebruikt heb zag ik niet meer in hun webshop
Hi Jan. Please may I ask what interface you have between diagbox and the car. Is it ELM327 by any chance? Or do you have a specific cable? Thanks for an awesome video. I've done the top up but am struggling to get the level reset.
Hi Jan excellent video what version of Diagbox did you use for the EDC17C60 ecu i am also trying to do this same job my car is identical to yours your help is very much appericated regards John
@@janjoukeDIY Thank you very much Jan i was on version 7.02 and wasnt able to get communication with the engine ECU now i managed to upgrade software today and i watched your video twenty times as your langague was different i still managed to follow your steps and got the job done . Again thank you for your help Regards John
Hello, I would like to ask you if you have evere done the "additive pump" test in Lexia, it is under the additive pump computer. There are 2 tests - 1. sound test - simple listening if the pump is clicking during some period of time 2. flow test - to measure how much additive the pump gives If I do nr. 2. "the flow test", the pump gives only 6 ml, but Lexia writes it should give 20 ml. Tested on 2 cars - Peugot Partner 2013, Citroen Berlingo 2012, both 1.6 HDi, 68 kW.
@@janjoukeDIY Ok, thank you. It is quite simple - just disconnect the hose going from the additive tank to the diesel tank and put a bottle under the additive tank outlet, then start the test in Lexia and measure volume.
This is not the adblue, that is in an tank in the trunk. Filling adblue does not need an computer and it is the driver manual. This car has both systems.
@@janjoukeDIY sorry, my question was unclear : car equipped with this tank ( Eolis as I remember name ) together with adblue tank. I am surprised that both tanks are installed. I have 508 blue hdi and still don't know whether car equipped with Eolis)))
FAP or Dpf fluid cleans the particulate filter by changing the temperature at which the trapped soot burns off. Adblue changes the nitrogen dioxide in the exhaust gasses to carbon dioxide and water vapour (I think!) So two different systems working side by side.
Hoi Jan, prachtige video's heb er veel aan als mede 308sw 1.6bluehdi eigenaar. Zelf ook maar een lexia besteld en hopelijk gaat het allemaal lukken. 😁
Hi Jan, which software did you use to read the values and do the reset?
Top! Ik wil dit zelf ook gaan doen. Welke vloeistof en welke aansluit slang heb je gebruikt? M.a.w. waar te koop?
Ik heb het bij misteroil besteld. De vulslang zat er bij. De kleur van de tankring geeft aan welk type eolys er in moet. De variant die ik gebruikt heb zag ik niet meer in hun webshop
@@janjoukeDIY ah top dankjewel!
Thank you for the instructions! I just want to know what kind of cable you used for the diagbox. I just had P15B3 error at odo 160K
I use an actia also called an lexia. Without it you can’t use diagbox
top film groetjes uit Amsterdam u bent een maestro bedankt man
عندي نفس المشكلة سيتروين بيكاسو c4سولار اجيب الماده من فين لو سمحت
Hi Jan. Please may I ask what interface you have between diagbox and the car. Is it ELM327 by any chance? Or do you have a specific cable?
Thanks for an awesome video. I've done the top up but am struggling to get the level reset.
I use an “lexia”, as I understood you will need to be able to use diagbox. I think I bought it from Amazon
Hi Jan excellent video what version of Diagbox did you use for the EDC17C60 ecu i am also trying to do this same job my car is identical to yours your help is very much appericated regards John
Hi, I am using Diagbox v07.66 in the video.
@@janjoukeDIY Thank you very much Jan i was on version 7.02 and wasnt able to get communication with the engine ECU now i managed to upgrade software today and i watched your video twenty times as your langague was different i still managed to follow your steps and got the job done . Again thank you for your help Regards John
Hoi Jan, weet jij welk type eolys ik zou moeten hebben voor mijn 2015 308sw 1.6 bluehdi ?
Als het goed is heeft de aansluiting van je vulleiding een kleur. Deze geeft aan welk type vloeistof je dient te gebruiken. Succes met je klus.
What tool did you use to reset it?
This is not Adblue its pat fluid completely different poducts....
Hello, I would like to ask you if you have evere done the "additive pump" test in Lexia, it is under the additive pump computer.
There are 2 tests - 1. sound test - simple listening if the pump is clicking during some period of time
2. flow test - to measure how much additive the pump gives
If I do nr. 2. "the flow test", the pump gives only 6 ml, but Lexia writes it should give 20 ml.
Tested on 2 cars - Peugot Partner 2013, Citroen Berlingo 2012, both 1.6 HDi, 68 kW.
I have never tested this.
@@janjoukeDIY Ok, thank you.
It is quite simple - just disconnect the hose going from the additive tank to the diesel tank and put a bottle under the additive tank outlet, then start the test in Lexia and measure volume.
Hello, wich year is your Peugeot ? is Euro 5 or Euro 6 engine?
The car is from 2015 and Euro 6
Do you need to top up the fluid with every type of t9 engine?
This is for the Euro 6 diesel. I thought there are 2 differnt systems possible.
Was the error P15B3?
I got this error at 174K on C4 Picasso 2018.
For those who read this, yes P15B3 means low Eolys fluid.
You need to reset the counter in the eolys pump module and in main ECU.
Peugeot 308❤
Well done
مرحبا جون محتاج السائل ده سيتروين بيكاسو C4 سولار
More Peugeot 308 SW
DPF??? It is FAP!
Its liquid for dpf
@@emka9537 🤣 liquid for dpf...
It's FAP - french idea and design filter!
@@emka9537 No one French design will call DPF.
There will always be talk of FAP.
Is this liquid together with adblue or without ?
This is not the adblue, that is in an tank in the trunk. Filling adblue does not need an computer and it is the driver manual. This car has both systems.
@@janjoukeDIY sorry, my question was unclear : car equipped with this tank ( Eolis as I remember name ) together with adblue tank. I am surprised that both tanks are installed. I have 508 blue hdi and still don't know whether car equipped with Eolis)))
@@janjoukeDIY I had no idea they made cars with both. I thought Adblu replaced Eolys system. Maybe only in some countries.
Hoi Jan, ik krijg de melding 'brandstofadditief aanvullen'. Is dit ook de DPF?
@@jeroenvangils8245 good question))). Adblue gives alarm 2000 km prior to engine cannot be started. I remember this
videos of