I have this amp in my party bus. Pushing 10 - 6.5’s and 2 -12’s. And it gets pushed to the absolute max. Runs wide open hours on hours at at time. Still running strong 2 years later.
Had issues with the VAD series Could not stop turn off pop. My alpine amp didn’t do it before in the same set up. Went buy a kicker and it went away. NVX was strong and always gave me power and sq I wanted just had turn off issues
Installed this amp a couple days ago, along with the NVX XSP 6.5 components and a couple Alpine coax that were already in the rear deck. 5th channel pushing the rest to a 12 inch sub in 2 ohm config. Sounds great so far. Nice and clear. Better than my previous pioneer 5 channel. The XSPs are nice but they're a bit big, especially the tweeter.
Congrats James R!!! I'm jealous bro!! Great tvid as usual Rob. Seems like NVX, D4S, CT Sounds, Soundqubed are all doing what they claim and releasing some decent quality gear for pretty reasonable prices!
I've been looking for the ideal 5 channel amp for my setup and i'm glad i found this video! Never heard of NVX but comments online are great so i'll give it a go. Thanks for the technical tests!
@@HifiVega Thanks for the code as well ! Just saved 22 bucks which in my local currency will let me eat for two days in a row. I'm very excited to see how this amp will perform with a 10" Infinity Kappa Sub and 6.5" Infinity Primus Components i'll be shopping in about a moment.
@HifiVega I ended up with an NDA501. I love the stealth looks of this amp, and it certainly can push the Kappa Sub and the Primus Components beyond their limits. I'm dealing with a slight ground loop issue but besides that, awesome amp!
Just installed this amp in my Can Am X3, its powering four Polk Audio 6.5's and a Skar VD 8" sub (very compact space, only had room for a single 8 under the passenger seat). So far it sounds fantastic and other than the obvious bass limitations of a single 8" subwoofer in a fairly small enclosure, I'm totally happy with it. Seems to make plenty of power cuz its EARSPLITTING loud, and the little sub flexes like crazy. So lets hope it lasts because it will get bumped/banged/vibrated/splashed/dirty on every outing.
The angle screw's on the terminals make it to where the screw does not press down on the wire evenly. I have seen many issues where the wires don't fasten down properly.
I am running the NVX VAD11005 on my boat and it has went the whole extreme hot Texas boating season so im impressed. My question is the NVX amps Clean power? Does your dyno tell you that information?
You can tell that with the DD-1, but honestly if I can’t hear the difference by ear (distortion wise) I don’t even bother and this one sounded just like every other 5 channel I’ve used recently as I stated in the video Kenwood, Alpine etc
I started out with 2 of the prior NVX JAD 900.5's. I ran one on the left and one on the right. The sub channels to 4 NVX 8'S. Bridged 2 channels to the 8's in my doors and channels 3 & 4 to the mids and tweeters. Back then i had a Dayton DSP 408 and it was a pretty damn good start to learn about DSP tuning and an active front stage. Those older ones you could turn off the on board crossovers, i am not sure you can do that with the newer ones. Great video buddy.
Hey y’all! Im looking for a an amp that can perform in a HOT climate. Im in texas and fried the cheap Taramps amp in 1 day. What’s the best “clear” amp for under 500 ish? 4 channel, high level input, auto remote on …with maybe a fan in it. I don’t need too much power and care more about clarity.
NVX put out a good amp back in the day it was the XPLD3K they don't sell it any more, but it was a nice Amplifier wish it was still part of their lineup.
Question... If you have only a pair of RCAs but you want to used all 5 channels you can choose 2 channel input and still get output on all channels ? I hope you can answer my question, thank you
This amp does play great and is solid. But im still not a fan of digital amps for mids and highs. Class d is great for bass but for those with an ear tuned to class a/b for decades now, youll hear the difference when a class d is running the mids. Having said that, most people will not hear a difference and it's still a very good amp! The kenwood excelon 5 channel is a 4 channel a/b with a class d for 5th channel all on 1 chassis and is a small foorprint.
The result of the 2ohm subwoofer channel of 777 Watts output and 86amp is this the peak current draw from the battery? Do you record the voltage output and the amperage output to the subwoofer? I see videos with 12 and 14 gauge subwoofer wires, and want to understand the appropriate wire gauge for the subwoofer based on the output.
The 86 amp draw will be a draw on your total system. Alt, battery etc… There are ampacity and wattage charts you can search for online for speaker and power wire.
@@HifiVega NVX support states for the 5 channel Sub out. voltage output at 2 ohms will be 48.9 AC. The amperage will 12.26 amps and will require 14 AWG with a length of 6 feet.
I used a db55 all year before I switched it out for an Audio Legion AL1200.1 and an AL110.4. The db55 was an awesome amp. I had zero issues with it during the time I used it. NVX makes great amps too! I'm so happy to see all these companies really bringing it!
Recently bought an NVX VCW 15…well I should say tried to. It’s been two and half weeks and still don’t have it. Bought from NVX website. It’s been a terrible experience. I know it has nothing to do with you. I’m just venting.
@@HifiVega really?! I can run the front doors and rear door speakers at 4 ohms and the rated power and the sub channel at 2 ohm power rating?! This would be perfect. Also the power rating your showing are rms power and the peak is double that amount?
Purchased this amp to replace my Rockford PM1000x5 that got water damaged by my fault. Got this unit because the stats and price looked right. For starts, the speakers terminals are cheap and the screw head is very soft and will easily get worn. The sound quality is far inferior to the PM1000x5, not sure if it is just the fact of being a class D, but there is a lack of mid bass on the speakers, has to fiddle with the EQ to get some adjustments, but nowhere near what I had with the RF. It is a budget buy, but I would much prefer the sound quality of the prior system on the same speakers.
@@HifiVega agree, have always been a RF fan, but have been a fan of your channel and Big D and wanted to try some of the new amps. Nothing wrong with this amp, just my hears prefer the RF, that is why for my new boat build I went all out RF and used the T-10004AD to run my mids and highs and a M5-1000x1 for the subs.
@@HifiVega i have two walmart gothic 12"s as subs.. and currently am using the rzr 2500.1 amp at a not rated 1 ohm.. not sure what it makes at 1 ohm.. but at 2 ohm uts about 700 watts... Subs are supposedly 2500 oeak 1200rms... Would it hurt to run both of these underpowered at 2 ohm on the nvx?
I have this amp in my party bus. Pushing 10 - 6.5’s and 2 -12’s. And it gets pushed to the absolute max. Runs wide open hours on hours at at time. Still running strong 2 years later.
Solid performer! Great vid and awesome little amp for someone not wanting to worry about electrical upgrades 👍
Fo sho!
Can tell me at what rms do i need to upgrade my electrical
@torrescesar71 1500 RMS or more, then you need the big 3 done bro
NVX hasn't disappoint me yet with the stuff I've used from them.
Me either
NVX is legit, never had any problems with any of their amps or subs
Me too
@@HifiVegawhat is the difference between the mvp and vad looking for amp for sxs
Had issues with the VAD series
Could not stop turn off pop. My alpine amp didn’t do it before in the same set up. Went buy a kicker and it went away. NVX was strong and always gave me power and sq I wanted just had turn off issues
I’ve had this amp for over a year and have zero complaints!
I just added this to my car. Only had it for 1 week, but very happy so far.
It’s a solid amp
has it held up
Big D sent me here, I own this amp and it runs very well.
Glad I know about your channel, quick sub!
Welcome aboard!
@@HifiVegathank you
Installed this amp a couple days ago, along with the NVX XSP 6.5 components and a couple Alpine coax that were already in the rear deck. 5th channel pushing the rest to a 12 inch sub in 2 ohm config. Sounds great so far. Nice and clear. Better than my previous pioneer 5 channel.
The XSPs are nice but they're a bit big, especially the tweeter.
Congrats James R!!! I'm jealous bro!! Great tvid as usual Rob. Seems like NVX, D4S, CT Sounds, Soundqubed are all doing what they claim and releasing some decent quality gear for pretty reasonable prices!
Under promise over deliver!
I've been looking for the ideal 5 channel amp for my setup and i'm glad i found this video! Never heard of NVX but comments online are great so i'll give it a go. Thanks for the technical tests!
Thanks for watching! Make sure and use the coupon code HIFIVEGA10 to get yourself 10% off
@@HifiVega Thanks for the code as well ! Just saved 22 bucks which in my local currency will let me eat for two days in a row. I'm very excited to see how this amp will perform with a 10" Infinity Kappa Sub and 6.5" Infinity Primus Components i'll be shopping in about a moment.
@@grandoFAST let me know what you think about it when it’s installed
@HifiVega I ended up with an NDA501. I love the stealth looks of this amp, and it certainly can push the Kappa Sub and the Primus Components beyond their limits. I'm dealing with a slight ground loop issue but besides that, awesome amp!
Just installed this amp in my Can Am X3, its powering four Polk Audio 6.5's and a Skar VD 8" sub (very compact space, only had room for a single 8 under the passenger seat). So far it sounds fantastic and other than the obvious bass limitations of a single 8" subwoofer in a fairly small enclosure, I'm totally happy with it. Seems to make plenty of power cuz its EARSPLITTING loud, and the little sub flexes like crazy. So lets hope it lasts because it will get bumped/banged/vibrated/splashed/dirty on every outing.
Polk Audio, do they put out pretty good subs? Thanks
I've always wanted to get that bad boy!... perfect full system amp
NVX seems to make pretty solid amps. Good video!
Yeah NVX is usually pretty solid
It still trips me out to see so many channels and so much power in such a tiny package. My first 4 channel amp was huge and only 600w
It’s wild nowadays!
I got a 5 channel 1600w peak under the drivers seat 🤷♂️
I have one installed in my boat its been great for me and works very well
The angle screw's on the terminals make it to where the screw does not press down on the wire evenly. I have seen many issues where the wires don't fasten down properly.
Thanks for the video, been awhile since I listened to your videos. Peace
Welcome back!
I am running the NVX VAD11005 on my boat and it has went the whole extreme hot Texas boating season so im impressed. My question is the NVX amps Clean power? Does your dyno tell you that information?
You can tell that with the DD-1, but honestly if I can’t hear the difference by ear (distortion wise) I don’t even bother and this one sounded just like every other 5 channel I’ve used recently as I stated in the video Kenwood, Alpine etc
I started out with 2 of the prior NVX JAD 900.5's. I ran one on the left and one on the right. The sub channels to 4 NVX 8'S. Bridged 2 channels to the 8's in my doors and channels 3 & 4 to the mids and tweeters. Back then i had a Dayton DSP 408 and it was a pretty damn good start to learn about DSP tuning and an active front stage. Those older ones you could turn off the on board crossovers, i am not sure you can do that with the newer ones. Great video buddy.
I don’t think you can turn the crossover off on the 5 channel, but that’s always a nice feature
I once had the JAD900.5 and was very pleased with the amplifier.
Those are great amps
Hey y’all! Im looking for a an amp that can perform in a HOT climate. Im in texas and fried the cheap Taramps amp in 1 day.
What’s the best “clear” amp for under 500 ish? 4 channel, high level input, auto remote on …with maybe a fan in it. I don’t need too much power and care more about clarity.
What brand is your stereo? I just bough this amp but I want to replace my stereo .
I often recommend NVX along with CT Sounds to those who are looking for the best amps for the money. Have not had any complaints.
Both are pretty solid
Do the power inputs catch a wire Ferrell?
Yes I'm running mvx n series 4 channel Ab with the 700 mono block sounds good
Nice review but do you think the VAD series compares to Fosgate's power series in terms of how clean the power is?
The vad amps are great, but they are not on the same level as RF Power imo
@@HifiVega ok thanks. What about hertz stuff? Do you think they are in league?
NVX put out a good amp back in the day it was the XPLD3K they don't sell it any more, but it was a nice Amplifier wish it was still part of their lineup.
Question... If you have only a pair of RCAs but you want to used all 5 channels you can choose 2 channel input and still get output on all channels ? I hope you can answer my question, thank you
You can select 2, 4, or 5 channel input
What had happened to your review on the jbl dsp4086 amp/dsp? I keep hearing good things about nvx
I’ve got it just haven’t gotten around to making a video, but I will someday!
Nice compact and does solid power looks solid too
It checked all the boxes
Mr hifi vega...... What model bookshelf speakers are those?... Im shopping around for new ones... Are they a 6.5 woofer?
They’re 6.5 and they are Dayton Audio bookshelves available at parts express. I can’t remember the model number off the top of my head
@@HifiVega thanks.. i will look them up... Be safe...
I've never been disappointed by NVX ok maybe the vsw's.
This amp does play great and is solid. But im still not a fan of digital amps for mids and highs. Class d is great for bass but for those with an ear tuned to class a/b for decades now, youll hear the difference when a class d is running the mids. Having said that, most people will not hear a difference and it's still a very good amp!
The kenwood excelon 5 channel is a 4 channel a/b with a class d for 5th channel all on 1 chassis and is a small foorprint.
X802-5
This is a great amp. I'm more Interested in your test bench radio on the left side lol how it's made lol
There have been a few good videos online of these being built so I didn’t end up showing mine off
The result of the 2ohm subwoofer channel of 777 Watts output and 86amp is this the peak current draw from the battery? Do you record the voltage output and the amperage output to the subwoofer? I see videos with 12 and 14 gauge subwoofer wires, and want to understand the appropriate wire gauge for the subwoofer based on the output.
The 86 amp draw will be a draw on your total system. Alt, battery etc… There are ampacity and wattage charts you can search for online for speaker and power wire.
@@HifiVega NVX support states for the 5 channel Sub out.
voltage output at 2 ohms will be 48.9 AC.
The amperage will 12.26 amps and will require 14 AWG with a length of 6 feet.
After watching this video, I've decided to purchase two of these rather than two CT Sounds 1000.5 amplifiers.
Awesome video!!
Thanks!
Question . I got a 50amph battery n stock alternator. Will this cook my electronics or itsll run fine?
I don’t know the exact set up, but from the info you shared you should be just fine.
Does this amp have a clip light built-in?
The Rockville db55 is also a good buy with very similar numbers but it’s 4channels are class ab :). The bonus to the NVX it looks a lot smaller :)
I haven’t had hands on with that one yet
@@HifiVega for the money it’s a great amp. It’s a bit large though.
I used a db55 all year before I switched it out for an Audio Legion AL1200.1 and an AL110.4. The db55 was an awesome amp. I had zero issues with it during the time I used it. NVX makes great amps too! I'm so happy to see all these companies really bringing it!
How does this compare to the model prior
Does the bass know adjust for all 5 channels or just the subwoofer channel?
Sub channel
HOPE YOU SEE REAL CAR AMPS btv. merry christmas and happy new year for you by Seppo
I have this great amp. Great video👍
Thanks
Recently bought an NVX VCW 15…well I should say tried to. It’s been two and half weeks and still don’t have it. Bought from NVX website. It’s been a terrible experience.
I know it has nothing to do with you. I’m just venting.
Can you do a review and dyno test of the avatar 3K or the 2K or even the 1K...please
This and Rockville DB55 are extremely similar. The boards are probably built in the same factory.
I haven’t seen the db55 internals, but it certainly could be.
If the sub is wired to 2 ohms to the amp, are you going to get the 2 ohm power while running the other 4 channels at 4 ohm?
Yes
@@HifiVega really?! I can run the front doors and rear door speakers at 4 ohms and the rated power and the sub channel at 2 ohm power rating?! This would be perfect. Also the power rating your showing are rms power and the peak is double that amount?
I need to try out some NVX gear.
You do
Purchased this amp to replace my Rockford PM1000x5 that got water damaged by my fault.
Got this unit because the stats and price looked right.
For starts, the speakers terminals are cheap and the screw head is very soft and will easily get worn.
The sound quality is far inferior to the PM1000x5, not sure if it is just the fact of being a class D, but there is a lack of mid bass on the speakers, has to fiddle with the EQ to get some adjustments, but nowhere near what I had with the RF.
It is a budget buy, but I would much prefer the sound quality of the prior system on the same speakers.
All valid points. That RF is a class leading amp and roughly 3x the price.
@@HifiVega agree, have always been a RF fan, but have been a fan of your channel and Big D and wanted to try some of the new amps.
Nothing wrong with this amp, just my hears prefer the RF, that is why for my new boat build I went all out RF and used the T-10004AD to run my mids and highs and a M5-1000x1 for the subs.
This or down4sound jp95?
The 95 has more power
Thanks a Brazilian... Vega
😂
Are these rms numbers or peak numbers of watts?
Rms
NVX amps are unreal, great styling and compact power
I like the amp also...
It’s a solid amp
@@HifiVega i have two walmart gothic 12"s as subs.. and currently am using the rzr 2500.1 amp at a not rated 1 ohm.. not sure what it makes at 1 ohm.. but at 2 ohm uts about 700 watts... Subs are supposedly 2500 oeak 1200rms... Would it hurt to run both of these underpowered at 2 ohm on the nvx?
This is a full bridge 5 channel amplifier
my mathd didnt add up, so i removed my comment rather than leaving something that wrongly argued against your review, sorry.
No worries man I went and doubled checked just to make sure after you left the comment
can that amp beat Audison Av5.1k? , i belive NOT