GETTING A TRUCK READY TO WORK WHAT I HAVE DO TO THEM
HTML-код
- Опубликовано: 21 апр 2018
- This video is about GETTING A TRUCK READY TO WORK
PIG MAT amzn.to/2qygzGL amzn.to/2qyipas
PIG MAT FAT MAT amzn.to/2ENWUaA
BLUE PARROTT HEADSET amzn.to/2vgkcqh
REDBACK BOOTS amzn.to/2FFIsWO
REDBACK SHOESamzn.to/2FKNXn9
MINI DUCTOR 2 amzn.to/2GBCwLa
MINI DUCTOR 2 COILS amzn.to/2FonIjH
DRILL HOG LARGE SETamzn.to/2FpDLhq
DRILL HOG LEFT HAND SET amzn.to/2ELbRzn
DRILL HOG M42 SET amzn.to/2oiYoEH
DRILL HOG BITS amzn.to/2EaurQc
CAPRI TOOL VISE 10517 amzn.to/2Foe7IJ
CAPRI TOOL SOCKET SET amzn.to/2FqYy30
CAPRI TOOL BIT MASTER SET amzn.to/2ENF9IO
AMAZON STORE IS BACK USE THE LINK BELOW
www.onlinetoolvendors.com/jun...
NEW WEBSITE CHECK IT OUT LINK BELOW
www.onlinetoolvendors.com
Official Website (new look and new merchandise ): thesnaponjunkie.com/
New Facebook groups THE SNAP ON JUNKIE / 26528. .
AND THE SNAP ON COLLECTORS / 28206. .
The Snap On Junkie Patreon Page: / junkieshoptime
If you would like to donate to the channel for better video content use the link: www.paypal.me/thesnaponjunkie
If you would like to purchase tools from KC Tools use this link:
www.kctoolco.com?rfsn=523602....
Business inquiries my email jussturg1981@gmail.com
FOLLOW ME ON INSTAGRAM @thesnaponjunkie FOR UPDATES AND BTS PHOTOS
FAN MAIL OR GIFTS
5507 BELCROSS CT
CINCINNATI OHIO 45238
LIKE, COMMENT AND SUBSCRIBE!!! TELL ALL YOUR FRIENDS ABOUT MY CHANNEL! 
Авто/Мото
The last time you will see that truck looking brand spanking new. Hopefully you're employee's can appreciate and respect their new work trucks you got them. 👍Cheers and nothing but success to you and youre business.
The soy boys who complain about you swearing in your videos have probably never worked on anything in their lives. I work in a heavy truck shop and everyone talks like that when we're repairing shit. Because it's fucking frustrating to work on filthy, rusty trucks sometimes, and you tend to cuss while you're doing it. It's also extremely rewarding when you finish one of those jobs. Love your channel. Keep doing it your way.
One sharp looking unit.
Wish you the best with the new trucks and the coming season.
Dash cam?
Rode in an UBER and he had a dash cam on a 10 minuets loop. Good protection against tickets and accidents. Cheap $30 unit.
Love your videos - always informative AND entertaining! Keep em' going!
Looking good!
Cool set up junkie, keep on trucking. Loving your Channel in the uk 🇬🇧
I love this guy ! Glad to see you doing great ! I love his way of explaining things he reminds me of me ! Lol! Bing watching your videos now ! Wishing I lived in Cincinnati I would so work for you ,I bet it would be a trip all the time !
Nice rig. Good luck with everything
Gotta love those little light bars I have a 10 inch in my f350 bumper
For all those wet wipes you might consider getting one of those folding crates to keep them from rolling under the pedals, that is what I used in my dump truck.
Can you show us your “reverse” light on at night?
Did you get a new camera the image looks better than normal?
Great music man
I just saw 3 of your trucks on colerain avenue. They are looking great
Austin Stahl thanks
Hey Junkie, do u leave those mudflaps on those new trucks. I usually replace those first thing with the flexible rubber ones and I also cut those down. The stiff factory ones just melt off or burn thru the tires
For the hand wipes, I use polywatwr grime-away wipes and they have this grit-like texture to them and it really gets the dirt and grease off
Junkie doesn't need them!
very organized
Great ideas on how to organize a business and you have your employees set us for success!! Now go make some money with that beautiful Viper Blue Pete!!
Good video junkie, I’m a fleet mechanic myself.
Little while back a guy I work with spliced into a back up alarm like you did. But the type of alarm must of used a pulse of power to activate it. The light flashed with the alarm haha. Everyone had a good laugh.
You’re so funny 😂 I love watching your videos
I don't know if it is the same on your dump trucks but on the last two new Pete's we got the drive shaft was out of time. I had to remove the slip yoke and turn it a couple splines on the one between the rear ends.
Some model of trucks are suppose to be out of time a tooth or 2, some engineer decided that would be balanced better or some shit, but as soon as the trucks get towed or had the drive shaft removed they get put back to normal because its easier and usually makes little difference
Any rust prevention for the holes you drilled? Figured with all the road salt and what not, night need it.
you can get rid of the small bubbles in the vinyl with an exacto knife, just poke a little hole in the center and work out the air
if you give a fuck
Mike's Tool Shed give no fucks
Looking good! The skull on the back = "keep your ass back 500 feet so you don't get your windshield smashed by rocks"
Where did you get the seat covers and organizers from?
If you spray the door with soapy water and then apply the decal, you can slide it around to position it and then squeegee the air and water out.
You should use the Wet Ones and support Ohio Jobs! They are made in Sidney, OH (From Global Materials I am sure)
FrugalPrepper's Garage & Garden Well I got a whole bunch of wet ones there Tom
Duluth trading company is the shit. Only brand of clothes I buy
Bakken Cutter for real. They're a little pricey, but I've had a few pairs of those fire hose pants for over 6 years and they still look great despite the abuse.
Prioritory list?
You have the best video introduction ive ever fucking seen. LOVE IT
FYI, Justin is selling his sterling on TruckPaper if anyone wants it
Yeah those crimp on colored plastic connectors suck.... pro tip would be to cut the plastic part off of the new connector (leaving just the metal) strip the wire, slide a piece of heat shrink over it, dip the stripped end in flux, stick the stripped, fluxed wire into the bare metal connector, and heat it with a soldering iron and apply solder so that the Flux draws the solder into the joint. Then slide the heat shrink back up over it and shrink. Takes a couple minutes longer but won't fail. Or, if you don't need to have the connectors for future detachment, just solder and heat shrink the wires together. Worth it to never have to worry about it, those crimped on connectors pull out, break, let moisture in, al kinds of bad stuff! I know you know better.
Jack of all trades
That's a lot of stickers.
Hey where are the JST mud flaps man... haha I love this fuckin guy
Damn that's a lot of stickers. Did the asphalt company give you their stickers with their 'special number' or did you have to go out and get them yourself?
Hard Knocks Forge Yeah I know Knox you that you have to buy the numbers yourself it’s bullshit
What’s the little door for on the back?
William Figueroa Jr. like a grain door let’s a little out vs the whole gate
Barrett vs Jrj 😂😂😂
What does LLC stand for
Donnie Thebeau limited liability company
Wow laser eye level yup may want to recalibrate that fucking eye
Your hauling asphalt but dont have a shovel or sprayer. Lol.
Use a grease pencil to mark your lines before put your stickers on
Hey junkie, is it possible for you to give me your Black Cb antenna from the Blue Peterbilt 567 Dump truck?
Calvin Lac No they sell them on Amazon
Buy a new truck you get them for free
Fuckin awesome
Hahahahaha
I like your videos, but littering is not cool.
just cant stand the foul mouth. he might have good info just cant get past the first 10 seconds of his videos