Modeling of Electric Vehicles using MATLAB & Simulink - (Part-2)
HTML-код
- Опубликовано: 23 дек 2019
- This is a Certified Workshop! Get your certificate here: bit.ly/3XxRlWr
This Webinar is all about the Modeling of Electric Vehicles specifically using MATLAB & Simulink. Each and every single concept is explained deeply. You will definitely learn the basics of Electric Vehicle Modelling and their applications. Happy Learning :)
About Skill-Lync
Skill-Lync helps you learn industry-relevant skills that will accelerate your career. More than 8000+ students have enrolled in courses across Mechanical, Electrical, Electronics, Civil & Computer Science engineering. We are rated 4.8/5 on Google out of 1000+ reviews. Our students now work in companies like Fiat Chrysler, Tata Motors, Ford, Ather, Mercedes Benz, Bosch, and many more.
Here are a few courses you can take a look at;
Master's Certification in Hybrid Electric Vehicle Design & Analysis - bit.ly/38iIyRZ
CFD Engineer Master's Certification Program - bit.ly/32lrnLQ
CAE Master's Certification Program - bit.ly/32iZ690
Design Engineer Master's Certification Program - bit.ly/38uuPIf
Master's Certification Program in Electric Vehicle Design & Analysis - bit.ly/32f42eQ
Master's Certification Program in High-Rise building Design & Analysis - bit.ly/2JAabvC
Master's Certification in Full Stack Web Development - bit.ly/3p1O9SP
Really helpful.Nice explanation !!
excellent video. keep going on with these types of videos
Thank you
It is really helpfull..waiting for more videos.thank u
Hello Sir Is your model running ? I am facing few difficulties , please reply if u can help me out via email kushagrapani250@gmail.com
Can you use the same setup but added with a IC engine component to determine a hybrid vehicle performance?
Sir bahut shaandaar.....Kya Aap direct current vector control method per bhi ek vedio bana sakte hai.....if yes ....to please bana dejiyega
Hello Can I ask ,I am a student and I made a simulation of solar powered vehicle using a PV array, Boost converter and DC motor. But the simulation result were wrong, that it gave a high amount of the output current as also the torque even though that the curve of speed is correct. Can you advice me what should I change!
Thank you for the detailed guidance. If doing for AWD EV, could you advise some things for it?
Use 2 Differential and speed converter
If you can''t find a specific item it is most likely because you lack some package. You will, other than the normal Simscape package, also need the driveline package, the powertrain blockset package and possibly the electrical package. All for Simscape.
i mostly find half of his block he is using, what can i do?
@@kostasbotonakis3276 You need the driveline and powertrain packages for Simulink. You might need others. If you can't find the block, then check which package it is included in on the mathworks site and make sure you have it installed.
@@Fuhrerjehova yes i checked it i dont i have it installed what can i do now?
@@kostasbotonakis3276 Install them? In matlab you can press "home" and then "add-ons".
@@Fuhrerjehova The powertrain blockset which contains the drive cycle source is not free to install. What can we do?
Which block is used for finding SOC from battery current?
Hi thank you for comprehensive video, could you describe more about the battery Soc estimation block used in this design?
even I want to know about same! Can you provide details if you got any regarding SOC estimation block
@@samarsawant6116 if you got the block can you please explain the steps ,iam currently using 2019a as in the video
if you got the block can you please explain the steps ,iam currently using 2019a as in the video
@@logushanmugam2714 try simscape , battery , bms , estimators , adaptive kalman filter
In the library browser
Heloo sir, can we use same method to simulate for two wheeler using to wheels.??????
how to find the gain block, which you given the name road angle inclination and head wind speed. i have tried normal constant block which is not connecting. please help me sir
How do you add a fuel cell to this model with an energy management system ?
Hello,in my case i have to use BLDC motor not motor with brushes as in your case,but i can't figure out how to power supply 3-phase bldc motor from H-bridge after.Does anyone have an idea how to solve this problem?
Are there only two parts or there is third part also ?
Any alternative for Longitudinal Driver? Powertrain Blockset is not available in Home License for Matlab.
Hello sir
Can get Electrical vehicle with supercapacitor simulation
Unable to connect the longitudinal driver to the vehicle block pls help?
May i know the version of matlab you are using ?
mam i want know how to do simulation can you send this simulation file ,
@Skill Lync Can you please tell me how to measure individual wheel speed
Where can I get the full file ??
matlab which version are ur using sir
What do we add in the excel sheet?
Can you share the link of your simulink model.
How do you connect driver to vehicle body
I am not able to find longitudinal driver. what to do?
What tools used in soc??? Please specify
which version of matlab is this please share me the link so I can practice.
I need this file for practicing ? can you provide it?
can you share the simulink model
How this same model works if we change the settings in H-bridge and make it external as in battery connection so that H-bridge will take power from battery
which sensors are used here?
Where can i find this model?
Last part is not clear, pls tell what blocks are used
Which type of vehicle is its?
sir pls suggest Longitudinal drive connect with simulink PS converter what unit has been taken
Use ps simulation converter block which should be set at km/h
I could not find the Longitudinal Driver block in my Simulink. It is 2016a version. Can I use any other block instead of that? If so, which one?
same problem for me too. did you get any alternate solution. please tell me
@@rajaruthvik9056 Maybe it's only available for later releases? Did you download the Powertrain toolbox?
Drive cycle source not available in library
Can I have complete simulation file of modeling of EV?
hello sir
can you please share the Simulink file
Battery SOC estimation block details needed
Hello ! Could someone help me out with developing the SoC Estimate Block ? Is it a predefined block or a subsystem developed by the user ?
Hi, I'm looking for the same solution. Did you get anything? If so please do share it with me, thank ypu.
@@parthdixit9509 Hello ! Unfortunately, I didn't get it either.
Hi, could you repeat this model? I have mistake while simulation. Would you be able to share with me model?
if you got the block can you please explain the steps ,iam currently using 2019a as in the video
you said DC-DC convertor is necessary otherwise we can not control the speed of the vehicle but I can not see in your MATLAB simulink model
I am unable to find longitudinal driver block in my simulink. I have Matlab 2015 version.
What should i do??
check your MATLAB installer and make sure you have all of the necessary modules installed (you don't need to uninstall and reinstall MATLAB at the same time, just open the installer program and tick the boxes of the additional modules that you need and they'll be automatically added)
In my matlab vehicle body is not present what should I use instead😰 pls suggest mee
can i get this file from you plz its really thank a lot to you
Can anybody send me this model please? I created it but it doesn`t work. I can`t find reasen why
how to create soc estimate ? can u plz explain. because i can't find soc block in my version
Same buddy
@@arslanghaffar7149 skill-lync.com/projects/final-project-design-of-an-electric-vehicle-27 u can see the block's in this project
Will you please mail the Inputs!!
Did anyone find how to build the SOC estimation?
Check the link, all boxes are matlab components skill-lync.com/projects/final-project-design-of-an-electric-vehicle-24
Hello, can anyone tell me how we can create the SoC estimate block?
hi where do you connect the info on longitudinal driver block
did u know the answer ?
My vehicle velocity is not following the reference velocity (here FTP75) ..what to do? ..please help @SkillLync
have you found a solution ?
have you find any solution? cause my vehicle drive backwards instead of following reference velocity
sir, can you please provide a link to the completed model that you used ?
Arey lud0x, same question 😂😂
Check the link, all boxes are matlab components skill-lync.com/projects/final-project-design-of-an-electric-vehicle-24
Please provide us an excel sheet becoz it is giving an error
Could you please show the Configuration Model Parameners and Solver Configurators? My model says: Nonlinear solver to advance time one step failed to converge due to Linear Algebra error. Failed to solve using iteration matrix"
Did you manage to fix it?
add electric reference block in your battery circuit.
Thanks! Bro
@@thefinalmessage--8289
I couldn't find remaining parts
Can you please help me on SOC estimation block. thank you
Check the link, all boxes are matlab components skill-lync.com/projects/final-project-design-of-an-electric-vehicle-24
How u made Soc block? Can u explain?.
same problem. have you figure it?
Same here
same
Did anyone figure out? How to make soc block?
@@snehapanigrahi4073 depends on what you want to design, if u unable to make it just sckip this and if you need this you need to learn soc estimation of lithium ion battery
No se quién sos, pero te quiero mucho
Could you please show the Configuration Model Parameters and Solver Configurators? My model says: Nonlinear solver to advance time one step failed to converge due to Linear Algebra error. Failed to solve using iteration matrix", Help me, Please?
use solver configuration ode15s
Thanks! Bro@@hrishikeshbarve9338
I m finding difficulty to connect vehicle output port ' V ' to integrator . Plz help.
the same problem
Use a PS-Simulink converter & set the output unit of the converter as m/s in the converter properties
@@kasifisfaque7263 do you have this model?
hello!
i dont have logitudinal driver block!
what could I replace it with?
same problem
same problem
You will find it in the Vehicle Dynamics toolbox
Instal 2020 a
Nice explanation.
if you have simulation file ,please send me.
Do you got simulation file bro????
@@esakkisankar30 .i was also looking for it
Hello sir,
Where I can get drive cycle source
I have matlab version of r2014a
Please help us sir
Short cut mere Lok er pechon Maris ken?
unable to find drive cycle in simulink library
You need to install Power Train Blockset
Thanks bhaiyo
@@phani03071989 how to install power train blockset and from where?
how do i make the SOC estimator?
Check the link, all boxes are matlab components skill-lync.com/projects/final-project-design-of-an-electric-vehicle-24
@@kasifisfaque7263 thanks, had the same question
are sir aap kisika b problem solve nii kar rhe
why you hiding information of model
to earn money
If you actually implement a Simulink scheme like this, following all the steps, the vehicle will move backward, I don't know why but it will move backward of 4.3 km.
Does anyone have the same issue as mine?
Send me ur field
Hey.... Can you please send me simulink file of the same? mail id... akshaytavadare1@gmail.com
@@akshaytavadare6406 bro did you get it ???
@@ramanraghav390 I didn't get that
I also had the same problem. Did you get yours fixed?
Very dissatisfied with the project
am unable to connect drive cycle source in matlab .am searched in matlab library but not coming why ?
Powertrain blockset has it
@@rohandoijode3468 unable to locate powertrain blockset library
@@rohandoijode3468 Do matlab 2017a version has powertrain blockset lib ?
If no ...then which version has powertrain blockset?