It's really happy to see the replies for each and every comments ❤️. I will support as much as I can. I'm looking forward to improve the model. Thankyou so much ❤️
shanmuga vadivel, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Dr. Rajesh Tyagi, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Akshat Chaturvedi, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
vedant kulkarni, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@@ramkumar-ks6cy If you increase the mass of vehicle, actual speed of the vehicle will decrease. Also, you can examine speed graph by changing no load speed of motor.
ram kumar, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@arpitapanigrahi5483, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Abhishek Dhaigude, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
@ramtej1949, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Mahesh Varpe, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I'm using another version of MATLAB, 2008b, the longitudinal driver is missed in this version, the ps-simulink convert doesn't connect to Vx, and the Dc motor doesn't relat to the simple Gear, please can you help me!.
danouva jima, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
the distance which you got after simulation that is 13.84 is this distance travelled by vehicle in 1000 secs or the total distance of the vehicle in single charge of battery
vedant kulkarni, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@40NoNameFound-100-years-ago, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@rishavnandi4648, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
vaishnavi more, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@AkMixup_clips, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing! PS: Developed in MATLAB R2019a along with Simulink and Powertrain Blockset libraries
Arjun Biju, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@anandps8790, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Suresh Kumar, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Very nice explanation..excellent.. really very appreciated..sir i had made model like above but unable to get correct results..can you share your model pls !!
AABID MULLA, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@user-dy3xy5en6z, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Romdhane Mabrouka, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
@user-ig1lm8yp9r, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@TheAcademyplusIndia, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Kunal Verma, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Moulaye Med, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
ajay kumar, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hello excuse me, may I ask for this one at 16:14 from where the recharge coms, is it from the regenerative braking system or can you help me please where I can see the diagram of the recharge which is from the regenerative braking system?
Abdulrazzaq Mohammed MA18 284, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
Naga Rapelly, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
How come your stimulation is running without connecting one of the output of longitudinal driver. I am Getting an error asking me connect the longitudinal driver output which u have left in this stimulation
afroz alam 20MCI002, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
R chandra sekhar reddy, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Your suggestion has been shared with our experts and hopefully, in the future, you will find a video on it. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hi, I did this simulation, but it gives an error in the battery section and says: battery must be greater than exponential zone voltage. What should I do to fix this error?
Maede Nafisi, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
Hi, Do you know how to make Macroscopic Energetic Representation in Matlab/Simulink for Battery Powered electric vehicle. If you know, kindly make a video for this topic. Because your videos find helpful content. Thanks
@UminberDesigns, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Moulees Waran, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hello thanks for the video I did every thing as you but when i run i am getting an error " all components and nodal across variavle involved cannot solve for one or more variable
mhmd ayash, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
This video is very helpful. Thank you so much. I have a quick question. I can not found the longidutional driver in any library. I will be pleasure if you help me about that. By the way I am using the R2023b version of the MATLAB.
@kalvizidan5589, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
"each physical network must be connected to exactly one solver configuration block there is no solver configuration block connected to physical network with the following blocks Controlled PWM Voltage Controlled Voltage Source 1 Controlled Voltage Source 2 Etc Etc" How to overcome this problem sir?
Shubham Patil, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@AbhimanyuKumar-mf7uh, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@@MATLABHelper Sir , i want to make dual speed transmission or dual gear of electric vehicles in matlab. Like you make single-speed transmissions or single-speed gear in matlab. Kindly help sir
Akshat Chaturvedi, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Abdulrahman Abu Zahra, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
İlhan SARICA, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
nmooshka _, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Santiago Carrillo, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
TODAYS TECH, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Jimmylolu Olajide, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I want a video that shows how to represent the load of the electric car in the distribution network to study the impact on the network in case of charging, I need it necessary
Mohammed Bosif, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
RAUT MD, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I have a problem with the nominal capacity of the battery. i am trying to simulate the renault zoe 2020 and with the capacity of 160Ah, the battery drains very fast. can anyone help?
Duarte Martins, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hello Can I ask ,I am a student and I made a simulation of solar powered vehicle using a PV array, Boost converter and DC motor. But the simulation result were wrong, that it gave a high amount of the output current as also the torque even though that the curve of speed is correct. Can you advice me what should I change!
Nada Jasmin, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Debiprasad Swain, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing! PS: It is developed in MATLAB R2019a along with Simulink and Powertrain Blockset libraries. You can learn more wit our blog or buy & download the model from mlhp.link/BlogEVSimulation
vishal bariya, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
there is always an error in my H bridge " Equations of one or more components may be dependent or inconsistent. This can cause problems in transient initialization. Here is the set of components involved: all components involved 'Project_1/H-Bridge' Equation location is: 'C:\Program Files\MATLAB\R2021b\toolbox\physmod\elec\library\m\+ee\+semiconductors\+converters\h_bridge.sscp' (no line number info)
Mish Al TP, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Sai Yaswanth Bingumalla, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Sir can we tune the value of longitudinal driver PI values without changing any other components value like dc motor and battery. Or can I attached self-made controller to this simulation Because I have to chane only controller not components.... please give me any idea
Priyanka Deshmukh, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Rupam Bansal, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hello Sir, I am learning Matlab by using the trial version, but while performing this simulation I am unable to find a longitudinal driver block in the library browser, please can you help me to get it....
@ChaitanyaKGhegadmal, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Sakiul Islam, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
What are you solver configurations? Using ode23t and trying to run the model it immediatly goes up to 62% then 0.5 sec/% till 100%, how can i speed up it?
Simone, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Suresh Kumar, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
sir when i am typing vehicle body its not showing anything others are present but vechile body not present while searching how to get the vehicle body block
ASHIS TARAI, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
This video is really very helpful. But I am using MATLAB 2016a and the block of Longitudinal Driver is not available in it. What can I use instead of that block to develop this design? Can you please tell me?
Farhan Tasnim, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@nadiarizqiandini923, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
RAKESH URK18ME011, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Roshan Chitranshi, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Rajat Sharma, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
Abhishek Kumar, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Visit mlhp.link/BlogEVSimulation for the article, model, or explanation.
Buy & Download Simulink Model from matlabhelper.com/cart/?add-to-cart=15796
hi where can i find free version of model? I mean which was shown in this video
Why you have reversed the connection of battery & controlled current source????
@@MATLABHelper thank you so much 😊 for this explain
Thank you so much for showing every part. It made the simulation lot more clear and easier to check if i did every part in order
Ömer Çebi, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
I am getting some solver error, can you share the Simulink which you have got the correct results, suresh.204850@gmail.com
very nice explanation.....Thank you so much 🙏
@alokbind3305, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
Thank you very much. This is most helpful video on EV Simulation.
Indrayani Dhotre, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
Very Nice & Informative Video about the simulation of electric vehicle.
PRIYANKA SINGH, Glad to see your appreciation for our Video. Cheers & Happy MATLABing!
It's really happy to see the replies for each and every comments ❤️.
I will support as much as I can. I'm looking forward to improve the model. Thankyou so much ❤️
shanmuga vadivel, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Bro is this model is 2 wheeler Or three wheeler
Thanks a ton 🙏 I tried to do model with your video and was able to get results at the end also.tqsm it was my first step in ev
Harshavardhan V Kulkarni, Glad to see your appreciation for our Video. Cheers & Happy MATLABing!
Sir this is 2 wheel er or 4 wheel er
hey bro can u help me out
Thank you very match! You helped my very well!
Best Regards
From Russia with love
Sir uh save my life and final year project ❤️
Sohan Das, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Bro can you give me your number urgent
Bro could u help me out I got one error, so that I can rectify
Can u please send the ppt
Have u cleard the error
THANKS SIR I DONE MY PROJECT BY YOUR VIDEO THANKS A LOT .
Pavan Kumar, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
The best teaching I've seen everr👍👍👍
Apurva Bhalerao, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
It is very interesting and well explain
Saumya Kumari, Glad to see your appreciation for our Video. Cheers & Happy MATLABing!
Excellent!! You just saved lots of time. :D
Only Truth, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
your video is very helpful
Dr. Rajesh Tyagi, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Interesting content and well explained
Kadeeja Tamanna, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Hi sir in which matlab version does the longitudinal driver present
Do you make simulations related to fuel cells?
getting different output values, followed the way described step by step
Akshat Chaturvedi, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
kindly share your simulink model with our team we would like to help you
@@anishyadav8676 bro I need help it's urgent can you mail ur details to my mail-id saiyaswanth150@gmail.com
Thank you so much for this one
Gopi Hanwal, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
its not working its giving error
THANK YOU TAUGHT NICELY
vivek paliwal, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Thank you So much sir ;)
asit ramteke, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
instead of using differential and simple gear can we use pulley as input
We can not for the developed model
vedant kulkarni, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Is it possible to create some Mechanical faults in motor or other component of EV and then check the performance all the results
@ ram Kumar Yes we can examine by changing parameters
@@anishyadav2499 Thanks for your reply
How can I create defacts, please give me an example
@@ramkumar-ks6cy If you increase the mass of vehicle, actual speed of the vehicle will decrease. Also, you can examine speed graph by changing no load speed of motor.
ram kumar, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
In a 2 wheeler EV if motor drives only one wheel, should we add only one wheel while simulation?
Can you please provide us with battery specifications.
@arpitapanigrahi5483, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Without powergui you have done the simulation. My model asked to add powergui block
Sir in which matlab version does the longitudinal driver present. Please respond me sir.
Nice informative video
Abhishek Dhaigude, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Can i use signal editor instead of signal builder because i am using new version sir if yes what are changes i have to do
@ramtej1949, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Can you please make a video on SOC, DOD and BMS algorithm development for Electric Vehicle.
Thanks
Mahesh Varpe, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@@MATLABHelper Sure. Thank u for your message and positive response 👍😊
@@MATLABHelper Email sended Successfully 👍😊
I'm using another version of MATLAB, 2008b, the longitudinal driver is missed in this version, the ps-simulink convert doesn't connect to Vx, and the Dc motor doesn't relat to the simple Gear, please can you help me!.
danouva jima, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Longitudinal driver is not visible when I am searching. Please respond sir
Good content for learning please watch
Akash Kansal, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
the distance which you got after simulation that is 13.84 is this distance travelled by vehicle in 1000 secs or the total distance of the vehicle in single charge of battery
It is the total distance travelled by vehicle in 1000 sec.
vedant kulkarni, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Bro can u pls share u slx file... i am getting solver error
Hello, what is the usage of the controlled current source?
@40NoNameFound-100-years-ago, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I don't have the powertrain blockset. What are the alternatives for logitudinal driver ?
@rishavnandi4648, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Can't find Longitudinal driver
Sir that ratings used in bev are for electric car or for bike
vaishnavi more, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Which matlab version used in this design
@AkMixup_clips, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
PS: Developed in MATLAB R2019a along with Simulink and Powertrain Blockset libraries
Bro why did you add a solver configurator before electrical reference?
Arjun Biju, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Thanks a lot sir but it shows error on info part of Longitudinal driver how to solve sir ?
At 4.18 while choosing the PS-simulink converter the screen is having vector format also and i cannot give km/hr
@anandps8790, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Thank you sir
Can you display the battery discharge settings?
Suresh Kumar, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Very nice explanation..excellent.. really very appreciated..sir i had made model like above but unable to get correct results..can you share your model pls !!
AABID MULLA, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
"Info" input on Longitudinal Driver shows error. Where should I connect that?
@user-dy3xy5en6z, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
very interesting , can you give us a similar model with PMSM and a simple control ??
Romdhane Mabrouka, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
have you made model with pmsm ? if yes can you pls share it ?
If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
I am not having singal builder block. please help me
hi, can i use this model for fuel cell range extender BEV?
waiting for your reply
@user-ig1lm8yp9r, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I'm not able to change the graph like that
Hi sir ,Which matlab version you are using ? pls answer ASAP Thanks
@TheAcademyplusIndia, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
How do i get longitudinal driver block on a student license?
Kunal Verma, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
But what about environnement inputs and what change if we have an induction motor
Moulaye Med, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
I am unable to find longitudinal driver in 2016 matlab.
ajay kumar, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
It is released to the version 2016b
@@anishyadav8676 can we use anything else for it??
Hello excuse me, may I ask for this one at 16:14 from where the recharge coms, is it from the regenerative braking system
or can you help me please where I can see the diagram of the recharge which is from the regenerative braking system?
Abdulrazzaq Mohammed MA18 284, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
What is the MATLAB Version brother
Naga Rapelly, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
How come your stimulation is running without connecting one of the output of longitudinal driver. I am Getting an error asking me connect the longitudinal driver output which u have left in this stimulation
afroz alam 20MCI002, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
hi sir how can i run the same in regen mode
Can you make video on series- parallel drive train
R chandra sekhar reddy, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Your suggestion has been shared with our experts and hopefully, in the future, you will find a video on it. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hi, I did this simulation, but it gives an error in the battery section and says: battery must be greater than exponential zone voltage. What should I do to fix this error?
Maede Nafisi, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
I dont know if this is still relevant, but you can decrease the nominal voltage to default (I tried 7.2) to solve the error.
Hi, Do you know how to make Macroscopic Energetic Representation in Matlab/Simulink for Battery Powered electric vehicle. If you know, kindly make a video for this topic. Because your videos find helpful content. Thanks
@aryasnair3660, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
can i create design and simulation of EV Scooter wiring harness using simulink
@UminberDesigns, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
In online longitudinal driver not available wht to do sir??
Moulees Waran, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hello thanks for the video
I did every thing as you but when i run i am getting an error " all components and nodal across variavle involved cannot solve for one or more variable
mhmd ayash, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
This video is very helpful. Thank you so much. I have a quick question. I can not found the longidutional driver in any library. I will be pleasure if you help me about that. By the way I am using the R2023b version of the MATLAB.
@dilekmutlu4061, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
How to simulate ev inverter to calculate it’s loss or simulate ev which shows loss at different parts
@kalvizidan5589, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
"each physical network must be connected to exactly one solver configuration block there is no solver configuration block connected to physical network with the following blocks
Controlled PWM Voltage
Controlled Voltage Source 1
Controlled Voltage Source 2
Etc
Etc"
How to overcome this problem sir?
Shubham Patil, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
How to add dual gear in the same model of electric vehicle.
Please help for college project.
@AbhimanyuKumar-mf7uh, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
@@MATLABHelper Sir , i want to make dual speed transmission or dual gear of electric vehicles in matlab. Like you make single-speed transmissions or single-speed gear in matlab.
Kindly help sir
hey sir I'm unable to find longitudinal driver, I'm using matlab 2015a please help
It is released to the version 2016b
Akshat Chaturvedi, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Is there any solution for this problem ?
Hi @rishvanandi as said by @anishyadav its released in the 2016b version of matlab kindly use a newer version.
good
Srinivas T A, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Thanks sir
Pintu Kr Sah, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
Is this a Design of an electric vehicle power train using supplied parameters?
Abdulrahman Abu Zahra, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hi. Can you show me to battery's discharge section. Because when ı run the system ı get an error. By the way thanks for explanation.
İlhan SARICA, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at ruclips.net/user/matlabhelperteam
If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
what can i use instead of the longitudinal driver because i can't find it in my matlab
nmooshka _, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I have problems with the Solver, can you helpe me? it seems the H-bridge isn´t giving liner info, and the solver can´t work
Santiago Carrillo, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
sir for 4 tyres, how we can acheive accuracy in graphs
TODAYS TECH, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Please, is there a tutorial for estimating energy consumption of an electric car? Thanks
Jimmylolu Olajide, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
hi,if you find a model for estimating energy consumotion?im looking for it ,thank u very much my brothor
I want a video that shows how to represent the load of the electric car in the distribution network to study the impact on the network in case of charging, I need it necessary
Mohammed Bosif, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
Can you add a model of Electric Scooter
RAUT MD, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I have a problem with the nominal capacity of the battery. i am trying to simulate the renault zoe 2020 and with the capacity of 160Ah, the battery drains very fast. can anyone help?
Duarte Martins, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Hello Can I ask ,I am a student and I made a simulation of solar powered vehicle using a PV array, Boost converter and DC motor. But the simulation result were wrong, that it gave a high amount of the output current as also the torque even though that the curve of speed is correct. Can you advice me what should I change!
Nada Jasmin, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Can somebody please reply which version is this
Debiprasad Swain, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
PS: It is developed in MATLAB R2019a along with Simulink and Powertrain Blockset libraries. You can learn more wit our blog or buy & download the model from mlhp.link/BlogEVSimulation
Reference pdf file mil sakti he kya project ki???
vishal bariya, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
there is always an error in my H bridge " Equations of one or more components may be dependent or inconsistent. This can cause problems in transient initialization. Here is the set of components involved:
all components involved
'Project_1/H-Bridge'
Equation location is:
'C:\Program Files\MATLAB\R2021b\toolbox\physmod\elec\library\m\+ee\+semiconductors\+converters\h_bridge.sscp' (no line number info)
Mish Al TP, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
I am unable to find Longitudinal driver in MATLAB R2014a please help me sir
Sai Yaswanth Bingumalla, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Same for me....did you get anything??
@@RajatSharma-ip1jp
It is available from 2020 matlab version
Sir can we tune the value of longitudinal driver PI values without changing any other components value like dc motor and battery. Or can I attached self-made controller to this simulation Because I have to chane only controller not components.... please give me any idea
Priyanka Deshmukh, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Sir, instead of h-bridge converter which converter can we use, as in 2016 model of matlab the block of H-bridge converter is missing.
Rupam Bansal, Do write to us with your requirement at team@matlabhelper.com or You can start online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
kindly share your simulink model with our team, we would like to help you
@@anishyadav8676 thank you sir
@@MATLABHelper ok sir. Thank you
@@MATLABHelper sir, please make a model using bldc or srm motor
Hello Sir,
I am learning Matlab by using the trial version, but while performing this simulation I am unable to find a longitudinal driver block in the library browser, please can you help me to get it....
@ChaitanyaKGhegadmal, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
sir, my matlab model is 2020b, but it doesn't have any powertrain blockset....How can I model electric vehicle?
please help me
Sakiul Islam, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
What are you solver configurations? Using ode23t and trying to run the model it immediatly goes up to 62% then 0.5 sec/% till 100%, how can i speed up it?
Simone, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
kindly share your simulink model with our team ,we would like to help you
@@anishyadav8676 can you help us mam I have doubt it's urgent
Did you solve problem ?
What equations you are taking in ode23t
Can you please share the Simulink diagram
suresh.204850@gmail.com
Suresh Kumar, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
sir when i am typing vehicle body its not showing anything others are present but vechile body not present while searching how to get the vehicle body block
ASHIS TARAI, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
This video is really very helpful. But I am using MATLAB 2016a and the block of Longitudinal Driver is not available in it. What can I use instead of that block to develop this design? Can you please tell me?
Farhan Tasnim, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Bro did u get anything??
Is there any option for this problem
What to do man ????
Thank you, this helps me so much. Anyway can you tell me which version of matlab that you use?
MATLAB R2019a
@nadiarizqiandini923, Glad to see your appreciation for our Video. Do support us by Subscribing to our RUclips Channel at www.youtube.com/@matlabhelper
hlo sir, i dont find the longitudinal driver block n wat can use instead of it ??
RAKESH URK18ME011, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
Bro is there any solution for this problem ?
Need help of charging simulation
Roshan Chitranshi, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
do you find the answer? i hve the same problem
I need a simulation for this topic : Command a synchronized machine to apply traction
An electric vehicle
Longitudinal driver not present in matlab... What can i do??any help??
Rajat Sharma, If you are looking for expert assistance and ready for the paid service, share your requirement on website chat or email to team@matlabhelper.com with information, including service preference, timeline, and any necessary attachments.
Sir, how to add longitudinal driver in matlab version 2022??
Abhishek Kumar, Do write to us with your requirement at team@matlabhelper.com, or You can start an online chat at our website. Don't forget to Subscribe to our RUclips Channel. Happy MATLABing!
same problem sir,please help us..