EXHAUST MANIFOLD/CONVERTER REPLACEMENT (2004-2012 MITSUBISHI GALANT) 2.4L)

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 87

  • @richhoops2413
    @richhoops2413 4 года назад +10

    You really helped me out. You speak extremely clearly. Also, thanks for not playing music. I'm sure others have said the same.

  • @flossinerryday3095
    @flossinerryday3095 3 года назад +2

    Straight to the point, insightful and informative, and perfect camera view angles. NEVER CHANGE!

  • @cscabrera
    @cscabrera 6 лет назад +6

    Absolutely professional work. Extremely well explain from start to finish. Thank you for sharing!!!

  • @carlostabares106
    @carlostabares106 5 лет назад +2

    what a great description of how to do it, what i did was write down all the screws and bolts i need and went to home depot and got them new so my mechanic can replaced all of them with new ones and to a auto part and order the lower gasket i need to replaced that one too thank you great video

  • @franklinwoods6119
    @franklinwoods6119 3 года назад +2

    Exact same process for Mitsubishi Eclipse 06-12 4cyl. This video helped me a lot my car is running the same code

  • @ericbaker9688
    @ericbaker9688 3 года назад +2

    My manifold came in today like speedy fast! So I soaked my bolts down with PB blast and will install tomorrow. Great informative video!! Now I know what to do on top of what I already knew. Extra advice! 👍

  • @jongrow4106
    @jongrow4106 Год назад +1

    Your Videos save my ass everytime, THANK YOU

  • @OnlineAutoRepairVideos
    @OnlineAutoRepairVideos 6 лет назад

    PERFECT!! Very well explained and detailed video, that 1k subscribers will get there in no time!

  • @sylkdreams3209
    @sylkdreams3209 5 лет назад +1

    I hate when manufacturers only do a "service bulletin" and not a recall .. this front cat should habe been a recall...
    Aaannyway.. thx much for the video! Such a time saver, with your thoroughness of details provided, i can get all the right tools pulled out b4 i start 😚 thx bud! Appreciate u!

  • @futtalk2780
    @futtalk2780 3 года назад

    Man you can be the next Chris fix!! Clean video

  • @Dron3sALaiRe
    @Dron3sALaiRe 6 месяцев назад

    P0431 absolutely has to be the front catalytic right? No chance that it would be the back one closest to rear of car??? Asking because I had my front one replaced a few years ago as a precaution and now I'm getting this code once or twice a month. I scanned it with my diagnostic tool today and all the 02 sensors are passing but does say catalyst bank 2 fails.

  • @Camromulus
    @Camromulus 3 года назад

    Wait, all four O2 sensors are at the front of the car? There aren't any underneath in the middle of the exhaust system? I have a 2008 Galant and need to change the Bank 2 Sensor 2 but I'm just gonna replace em all but wasn't looking forward to crawling that far under the car.

  • @fnfjsshsbbfvuf4708
    @fnfjsshsbbfvuf4708 5 лет назад +3

    1:30
    Is that bank 2 sensor 1? I’m getting a P0051 code

  • @jeremyramirez6875
    @jeremyramirez6875 2 года назад

    How did you fix the to rich condition? I am getting a code for incorrect air to fuel ration and giving a to rich code

  • @kokoigi9496
    @kokoigi9496 2 года назад

    Why one honeycomb was missing ? Did someone remove it or the catalytic converter for this car comes with one honeycomb catalytic converter only ?

  • @lorenzorossi8671
    @lorenzorossi8671 4 года назад

    that 12pt16mm socket on the rusty 17mm trick, that's classy. used to work on junk cans and never thought of that.
    also the later comedy content is quality stuff.
    subscribed
    love from Italy

  • @gnickolas69
    @gnickolas69 3 года назад

    Great video what about the p0420 code is that lower cat

  • @yoz1967
    @yoz1967 5 лет назад +1

    where to get a cat that will be accepted in Cali or NY? Replaced o2 sensor but still getting P0431 code

    • @barricadegarage5361
      @barricadegarage5361  5 лет назад

      Im not sure. The EPA is crazy out there

    • @childperson9507
      @childperson9507 3 года назад

      I’m having the same problem. Trying to find one that’s california complaint. My auto mechanic is trying charge me over 2 grand stating I have two separate catalytic converter. Replace one and then we ran it. Got another code stating it’s the second one and my o2 sensors are good.

  • @brother_Tennessee
    @brother_Tennessee Год назад

    What is the name of that tool and brand you are using in that video

  • @mariosalmeron6933
    @mariosalmeron6933 9 месяцев назад

    Where did you buy the manifold and where in America you had it shipped?

  • @zippythechicken
    @zippythechicken 4 года назад

    good job... i think i probably would have wired that heat shield on there if possible.. they get kinda hot

  • @StayFrostyStragler712
    @StayFrostyStragler712 5 лет назад +3

    How much did you pay for the Manifold converter in total? Besides shipping. Or was that all together? Did you buy a higher quality 1 or a cheaper 1? Good vid! Helps a lot!

    • @barricadegarage5361
      @barricadegarage5361  5 лет назад +1

      Federico Hernandez thanks I purchased the converter from rockauto.com for $260 shipped.

    • @wilmerherrera1340
      @wilmerherrera1340 4 года назад

      www.rockauto.com/es/catalog/mitsubishi,2006,eclipse,2.4l+l4,1431916,exhaust+&+emission,catalytic+converter,5808
      This one ?

    • @yktazz6673
      @yktazz6673 4 года назад

      They was tryna charge me 270 in shipping

  • @yktazz6673
    @yktazz6673 4 года назад +1

    Bruhhh you literally saving me a lot of money right now. Subscribing for sure!

  • @OGCJ10
    @OGCJ10 6 лет назад +1

    When you replaced the part did you also replace all of the O2 sensors as well? Or did you reuse them from the old cat ?

    • @barricadegarage5361
      @barricadegarage5361  6 лет назад +1

      OVO J I reused my old o2 sensors, no need to replace them

    • @OGCJ10
      @OGCJ10 6 лет назад

      @@barricadegarage5361 ..thanks...how is the car running with the new cat..any problems ? Also, what brand is the cat?

    • @barricadegarage5361
      @barricadegarage5361  6 лет назад +1

      OVO J the car runs great, it idles smoother the brand was EASTERN CATALYTIC and was ordered of rock auto for $255.
      its about a 3 hour job

    • @mistaloko7712
      @mistaloko7712 2 года назад

      smooth job bro wat type bolts do you use at the flange if they break bc none of the auto parts stores carry tuem any more

  • @kevo9993
    @kevo9993 4 месяца назад

    Great video! Thanks for the info.

  • @josephsavoca4418
    @josephsavoca4418 3 года назад

    Yo, does the new cats without the heat shield eliminate the tiny /lawn mower/weed wacker sounding engine acceleration? -I would do this just to make that sound go away. I inherited (COVID) a 2005 Galant and it is fun to drive but that sound is killing my pride.

  • @streetbikerchef7022
    @streetbikerchef7022 4 года назад

    Hey man I watch all your galant videos because I have the same car and have a question I recently had my timing belts and serpentine belt changed but now my serpentine belt squeals and I’ve even changed it from the gates to the continental quiet hog belt still squealing and also car sounds louder from exhaust manifold so I’m going to be changing out the gasket but any ideas on why the serpentine belts doing that and why the exhaust manifold sounded louder after getting timing belts changed? Also on the serpentine belt I’ve changed the old idler pulley and tensioner with all new parts same with timing belt used the complete kit with auto tensioner and new water pump

  • @LiEazzyE
    @LiEazzyE Год назад

    Would like leak cause a code p0430? Where is bank2 we have the same car

  • @Scotty23
    @Scotty23 3 года назад

    Even though you car is a 4 cylinder. You still have 3 cats ?

  • @Perfectdancing
    @Perfectdancing 2 года назад

    How do you know if you need a new exhaust manifold?

  • @MLinktheprophet
    @MLinktheprophet 3 года назад

    Do you still book appointments? I need this done to my car.

  • @yoz1967
    @yoz1967 4 года назад

    On a 2006 is the cat in front of the motor when the hood is open or is it under the car? 2006 Galant

    • @barricadegarage5361
      @barricadegarage5361  4 года назад

      You have 3 cats, 2 in the engine bay and one under the car in the exhaust system but you can verify this by poppin the hood and looking for yourself

    • @yoz1967
      @yoz1967 4 года назад

      @@barricadegarage5361 how can ya tell which is bad or do they all have to be changed?

    • @barricadegarage5361
      @barricadegarage5361  4 года назад

      @@yoz1967 scan the computer for the codes

    • @yoz1967
      @yoz1967 4 года назад

      @@barricadegarage5361 p0431

    • @barricadegarage5361
      @barricadegarage5361  4 года назад

      @@yoz1967 yeah... youll need to do what I did in this video

  • @valereyes8320
    @valereyes8320 5 лет назад +1

    Eres un buen mecánico brother saludos

  • @williambarrios9276
    @williambarrios9276 5 лет назад

    What was that machine you got the printed results from and does that paper goes to the DMV?

    • @barricadegarage5361
      @barricadegarage5361  5 лет назад +1

      In Maryland they have self test emissions station. Instead of an actual person doing the test, you drive up and hook the data link connector to your car and the Kiosk machine will scan your cars emission related data. If you pass the test,
      it prints out your papers right there on the spot

  • @LiEazzyE
    @LiEazzyE Год назад

    Hey I just got my new car in today. Need ur help

  • @AliKFahad
    @AliKFahad 3 года назад

    hole video is amazing ... Many thank bro

  • @DJK-yt9mu
    @DJK-yt9mu 3 года назад

    Great video man !
    Have you had any issues with your belt noises on your Galant I have the same car?
    Where did you purchase your manifold ?

  • @mow59
    @mow59 2 года назад

    thank you great video.

  • @jayahmed327
    @jayahmed327 5 лет назад

    What caused the rich condition and how to fix it?

  • @Usmanthemecano
    @Usmanthemecano 6 лет назад +1

    Is that a snap-on ratchet?

    • @barricadegarage5361
      @barricadegarage5361  6 лет назад

      Sakeenah Auto Solutions
      Milwaukee 2558-20 M12 Fuel 1/2" Ratchet

    • @Usmanthemecano
      @Usmanthemecano 6 лет назад

      BARRICADE GARAGE I was referring to the hand tool not the Milwaukee. Is it harbor freight or snap on?

    • @barricadegarage5361
      @barricadegarage5361  6 лет назад

      Sakeenah Auto Solutions oh, its a harbor freight ratchet

  • @ballard177
    @ballard177 4 года назад

    will this cause rattling and loss of power?

  • @crystalzuniga277
    @crystalzuniga277 4 года назад

    So which side is bank 2 sensor 2?

  • @rogerthomas7482
    @rogerthomas7482 4 года назад +1

    where did you get yours from ?

    • @barricadegarage5361
      @barricadegarage5361  4 года назад +2

      Rock auto.com

    • @rogerthomas7482
      @rogerthomas7482 3 года назад

      @@barricadegarage5361 thanks I'm trying to replace the negative battery terminal cable but can't find the engine block is supposed to be grounded to for my galant, could you do a video on that?

  • @legendarygoat8913
    @legendarygoat8913 5 лет назад +1

    Is the code still gone?

  • @lorenzobecerra6840
    @lorenzobecerra6840 2 года назад

    Bro thank you I hope this is the solution💯 love the content kee it up gang🙏

  • @tazzhall6036
    @tazzhall6036 6 лет назад

    very detailed and helpful,thanks

  • @maurobernal5507
    @maurobernal5507 Год назад

    Was that a Pittsburgh ratchet

  • @Usmanthemecano
    @Usmanthemecano 6 лет назад +1

    0:25 priceless 😃

  • @lacitykid9224
    @lacitykid9224 Год назад

    Thank you gang

  • @giorgiobrown9811
    @giorgiobrown9811 Год назад

    I need a heat shield for my new converter.

  • @chika8504
    @chika8504 4 года назад

    Can I use a universal 1

  • @jaleelphillips1367
    @jaleelphillips1367 6 лет назад +1

    Bruh you’re OC helpful, i have the same engine light code as you, and watching these vids have helped a bunch, thank you. Can you link me the converter manifold and catalytic converter you bought online? And what part MD you from, I’m in Suitland

    • @barricadegarage5361
      @barricadegarage5361  6 лет назад +1

      Jaleel Phillips thats wussup. Im from Largo. the site wont let me link it but just go to Rockauto.com and punch in your vehichles info. I get most of my parts from there. the part cost $255 and took me around 3 hours to install

    • @jaleelphillips1367
      @jaleelphillips1367 6 лет назад

      BARRICADE GARAGE thanks man and you got a twitter or snap?

    • @jaleelphillips1367
      @jaleelphillips1367 6 лет назад

      Or an email I can reach you at

    • @barricadegarage5361
      @barricadegarage5361  6 лет назад +1

      Jaleel Phillips I dont have a twitter or snap but you can reach me at chanikiqiti@gmail.com

  • @joannemarc9121
    @joannemarc9121 3 года назад

    Love the x files music 😂🤣👌

  • @maurobernal5507
    @maurobernal5507 Год назад

    Lucky them bolts didn’t brake with out some PB blast 😂

  • @tinusgang6899
    @tinusgang6899 Год назад

    Aye along the part number 642249 u can use anyone right