TurboKits.com Mercedes CLA 250 BOV Spacer Install
HTML-код
- Опубликовано: 21 дек 2014
- www.turbokits.com/tk-cla250-g...
TurboKits.com installs our Billet Aluminum Blowoff Valve (BOV) Spacer specifically engineered for the Mercedes CLA 250 in under 6 minutes! Also fits the GLA250, A250, and CLA180. Авто/Мото
2:33 best exhaust notes ive ever heard
use nitrile gloves to prevent some of the hand scratches... this also happens to.me every time I work on cars haha
Here's what they don't tell you....
1. 5 minutes is a kinda fiction if you're even a bit handy it's probably 15 minutes to get it right, it's a very tight spot to tighten these tiny hex screws. Try an hour or 2, if you drop your tool or the tiny hex screws into the skid plate under the radiator
2. Don't work outside in the cold you WILL DROP YOUR SCREWS and what that means is you need to get under your car and remove the skid plate (6 bolts) to get your tool and screws that you dropped. It just so happens that it is the perfect scenario of dropping tools in this tight spot so more than likely you're going to drop the tools into the skid plate.
Installed one for a 2016 cla 250 4matic 2.0T and it sounded good for a couple days now it’s making a noice likes it’s getting stuck or leaking air, going to remove today to inspect and relube or replace the o rings
Mine did the same thing. Perfect for 2 day then sounds like it's leaking or something. Did u figure it out?
You’ll be good bro I didn’t even remove it the sound changes after a bit but it’s cool still running good
Do urs sound like the valve is spitting violently instead of the straight whoosh? Mine can't sound right lol
It did sound weird for like 3 days but the noise eventually went away it’s probably the o rigs expanding or something
@@chrisg3268 I just put mine on and it’s doing the same thing what should I do?
I install my today and sounds not to loud :/
Is there a difference between the cla250 in us and Canada? Because the bov spacer won’t fit in my 2016 cla 250 4matic. The bov doesn’t even look like that. Mine is telescopic. It pushes in and out. The bov spacer is too big. Help please.
Hello, I just installed a blow off valve spacer on my A250, but it's throwing a fault code ' turbocharge bypassvalve '
and my car's exhaust isn't crackles anymore until i reset the ECU. Any ideas?
Hi where did you get that carbon engine cover from? Looks great!!
We worked with Seibon and had it made custom and then it became a product offer. We have them in stock :) www.turbokits.com/Mercedes-Benz/CLA_250_-_C117/Interior_-_Exterior/TurboKits.com_CLA250_Carbon_Fiber_Engine_Cover/2237/
Boris, we have a lot of parts in development right now. Stay tuned for more information and as we release them they will be up on our website (www.turbokits.com). Thanks.
Would you suggest adding gasket maker ?
We do not, with 100s and 100s of these sold and functioning as intended, the included o-rings do the job of sealing the boost without issue.
Is it stock a bypass valve?
And what if I want to install a BOV will it fit??
The stock blowoff valve is fully recirculating. We do not know of any aftermarket BOVs as of now. Thanks.
I can be fit mercedes cla 180 2017?
Can you please explain what your doing next time it will be really helpful and also please use a flash light for it to be more clear what your actually doing.
Thanks
This was a video representation of how quickly the unity can be installed. Customers do receive a full PDF with color picture for the installation.
+TurboKits.com oh ok thanks, do you know if it fits the cla 200 by any chance and also do you ship to the uk.
Thanks
Yes it does and yes we do. I would expect DHL to be $45-$50, so if you have a friend who wants one as well and get 2, it's probably only $5 - $10 more for shipping 2.
+TurboKits.com ok thank you
Anytime, let me know if you want to get one (or 2) moving to you.
Hi, can this fit on infiniti q50 2.0t with the same m274 engine as the Mercedes 250 series.
Yes, we would expect it to drop right in, we are already selling these to QX30 owners with great results. Order one up online. If it doesn't fit, we'll be happy to take it back for a full refund :)
I noticed that this is open to the bay, does this or can this introduce any contaminants to the engine, or cause issues?
No the factory BPV stays closed, it only opens to vent, meaning forcing air out, so nothing can get sucked in.
Heading your way...
Hi is it same fitting and same kit for my b class please? And its been ages trying to find my diverter valve but i cant even find it, i have b200 amg line
What year, what motor? Does the turbo look like the one on the CLA in this video?
Installed mine today ..it works but gives my that kind of flutter whoosh sound, did I install it correctly? Haha
Sometimes that happens to mine when i step on it but get to low rpms, if you’re trying to just hear the sound try it just on the higher rpms
Yes Chris is correct, it is purely a machined alum spacer, there are no moving parts. So it only amplifies the sound your factory by pass valve is making, which, if you are light on the throttle and not in a lot of boost, will not be as strong.
hi! do you have this for mercedes w205 c180? thanks
Hello, currently we only have a spacer for the CLA, GLA, and A platform. We have not tested it on the C180. We would be happy to send you the spacer for testing. If it doesn't fit you can send it back for a full refund. If you would like to place an order you can e-mail sales@turbokits.com, thanks.
Hello, I have a 2015 CLA 180 Shooting Brake. This model is not available in America. Would this fit my vehicle?
We have found that this fits most 2013+ MB Turbo motors. But to be sure, please send a picture of your turbo to sales@turbokits.com and we can double check with our head tech. Thanks!
Do you have C250 parts?
+Bruskey We add stuff to our website every day. If there is something specific, send us a link in e-mail to www.turbokits.com/Page/Contact/ and one of our reps can look up if we can get it and how much. Thanks!
Will this fit a 2014 c250?
Yes sir!
Hi, it’s compatible with C250 w205 ? Thank you
Yes!
Does it make the car move a little bit quicker or just better sound
This is purely for the sound. It does not change the mechanical function of any of the parts.
TurboKits.com thank you so much
Anytime!
TurboKits.com I also wanted to know if I do a muffler delete if it's gonna sound good
We do not offer a muffler delete, but I have seen a few videos on here of CLA owners that have done it. Check those out and if you like the sound, go for it. Or you can always get one of our CAT back exhaust and do it right :)
Its effect the car if i install it for long time ?
moayad alzadjali our BOV Spacer only vents to the atmosphere, giving you that great “whoosh” sound. It does not negatively affect the vehicle. Thanks.
What if my cla 250 already has a down pipe and tune ?
Perfect, will add some great additional turbo noises!
Is there a way to make the cla 250s bov make a flutter sound???
Flutter is typically caused by air passing back through the turbo compressor blades, not an aftermarket BOV/spacer (unless the factory one is recirculating); we do not know of any aftermarket BOVs as of now. Thanks.
fluttering is bad for the turbo
I’ve been wondering. Does installing a BOV on a CLA 250 trip and airflow sensor since it changes the pressure that goes through it?
No
I just tested mine out and it worked perfectly on my cla250 2015 sounds waaaaay louder
No the factory ECU tunes on speed density, there is no Mass Air Sensor, so none of the typical MAF issues when adding a BOV.
Is this safe on the engine and turbo?
Yes, absolutely, we have hundreds installed on almost all new model Mercedes turbo motors without any issue :)
It can be fit on Mercedes cla200 ?
Yes, absolutely!
hello can you make an video how to installon the C250/200 W205 thanks
+Mercedes AMG Saudi Arabia - We'll see what we can do! Most customers have had no trouble installed them, even without written instructions at first. What is it that you have questions on?
+TurboKits.com im talking about the Same BOV Spacer but on the w205 we need how to Install video if u can please thanks
+yousef wazna Ok, we don't currently have a video of it on the W205, we will look into getting one made, it will take some time. The instruction PDF that you receive with the spacers is very clear. The video was more intended to show how quick of an install it is, so the PDF back up of the instructions is all that is needed. Thanks.
+TurboKits.com yup but the Engines have different looks and different Turbo postion and in the w205 u have to open the intake tube i think to get into the Turbo whenever u post the video i will buy it very fast
good luck
+Mercedes AMG Saudi Arabia Oh, we have digital PDF instructions for the W205, just not a video. The install is very similar once you remove the piping.
Work on new Mercedes A-Class W177?
Not that we have been able to confirm as there doesn't seem to be the same integrated bypass valve on the newer A250s.
Hola, buen día. Esto agrega HP?
No, esto no agrega HP, esto es simplemente para permitir que la válvula de derivación de fábrica haga ese dulce ruido de turbo.
can do on GLA 200 ?? 211hp (Remap ECU+Intake+Catback)
The spacer will fit 100%! Yes.
That's not very well, i bought a intake for my cla and it was work more good
Yes an intake since it opens up a lot of the factory sound baffling will also allow more turbo sounds. The BOV spacer is a great way to get some extra turbo goodness at a much less price and easier install.
hau nguyen what intake
hau nguyen what intake did you get
lol sound like a broken engine.