Thank you so much for this video. I am doing an old jeep yj project car. The teacher's detail saved the day for me. A big help. The additional three point and 5 point explanation was the winner that saved me. I would have been lost without it! Carry on making those great tutorial assist videos.
Well, that certainly takes the guesswork out it. I always wondered how the newer wheels attached. Good info. Thanks for taking the time to make this for us.
horn will not work when pressed, only if I make direct ground contact on the wire. Also, the horn button has very little distance from the wheel, which I feel that if it did work, even the slightest bump would set it off. I'm stumped.
I called jegs and got every part number you gave me 100.04 for every thing I went with the red bowtie horn button. The wheel is the rose wood it's going to be beautiful. Thank you again..Stan
Terribly sorry for the very late response. I would like to answer your question to help the next person. When there is no notch it's because the pin you remove from that tubing has a locking ring retainer that comes out when you pull the pin out. You would re-use the retainer ring from the tubing to hold the wire in.
lol 🤣 my horn shit the bed. Something went wrong and i had to remove the entire horn from my setup lol otherwise it would just sound the horn constantly.
No se si estas fuera del U.S.A. , pero el lugar mas facil a comprar los kits y volantes cuando no viven en el U.S.A. es por Amazon. Si viven en el Estados Unidos se pueden comprar por Summit Racing.com, JEGS.com, Speedway Motors.com .... etc.
I hope Grant reached out to you after seeing this. This is a great and detailed tutorial. Thank you so much!!!
Alas....they did not.
appreciate that.
Thank you so much for this video. I am doing an old jeep yj project car. The teacher's detail saved the day for me. A big help. The additional three point and 5 point explanation was the winner that saved me. I would have been lost without it! Carry on making those great tutorial assist videos.
Thank you !
This is EXACTLY what I was looking for right now. After 3 or 4 other videos, this is it. THANK YOU
Well, that certainly takes the guesswork out it. I always wondered how the newer wheels attached. Good info. Thanks for taking the time to make this for us.
Grant should pay you royalties for explaining their unclear paper only installation instructions in a proper way.
Thanks : o )
Totally !!!
Great job on the video! Thank you for the torque specs and the double-sided tape trick.
keep making great videos
Great Video helps a ton with answering reasoning and specs to what and why he helped within t4 minutes to answer if the wheel I bought would work
Thank you very much for the tutorial! The instructions were screwing me up but your video sorted it out. Appreciate it!
Excellent instructions. Told me everything I needed to know to install my steering wheel.
Great video man! Grant should take notes! Thx!
Thank you . Your video helped me make sense of what I was looking at.
Thank you !
Nice video! Mine came with a foil sheet , i guess for grounding. You never mentioned that. Otherwise really good video.
Good tutorial Brother
Thanks for this. Mine quit working so this will help us trouble-shoot to be sure that something isn't loose/broken.
Best video out there for installation!!!! Thanks
Appreciate that.
horn will not work when pressed, only if I make direct ground contact on the wire. Also, the horn button has very little distance from the wheel, which I feel that if it did work, even the slightest bump would set it off. I'm stumped.
Call me here at Grant Products 956-542-0202 Will Morales
Bravo
very good video i have my install kit and wheel, gonna give it a go today.
Great video 👍🏾
Well done. Thank you!!
Thank you ! So very helpful!
I called jegs and got every part number you gave me 100.04 for every thing I went with the red bowtie horn button. The wheel is the rose wood it's going to be beautiful. Thank you again..Stan
than you your video is perfect a lot better than the instructions that came with kit
thank you
Do you happen to know what installation kit should be used on a telescoping column from the same time period? (1981 el Camino)
the Kit we offer for the telescopic column is # 6400 . It should be out in about 60-90 days. You can contact me at techsupport@grantproducts.com
@@guillermomorales6030 I said telescoping when what I meant was tilt. Will this work with a tilt column?
@@TheHalomaster2000 Yes Sir.. sure will . Any Gm column 1969 to 1994 . Prior to Airbag and No telescopic.. but for sure any tilt column.
Great help, thank you.
I'm trying to do this for the Grant chrome cap but it will not stay on, pops right off whenever I turn the wheel.
Sorry to hear that. The horn spring might be to depressed to tight. call Grant for some foam pads to replace that spring. so that no longer happens.
Horn installed exactly like video, horn not working with button. I have to ground out on center shaft bolt.
Please call me at GRANT 956-542-0202 or techsupport@grantproducts.com
What do you do if the plastic sleeve isn’t notched to lock the spring in.
Terribly sorry for the very late response. I would like to answer your question to help the next person. When there is no notch it's because the pin you remove from that tubing has a locking ring retainer that comes out when you pull the pin out. You would re-use the retainer ring from the tubing to hold the wire in.
Ahahah. I was like 2 notches on the spline off. Time to re do this again
Glad the Video helped.
lol 🤣 my horn shit the bed. Something went wrong and i had to remove the entire horn from my setup lol otherwise it would just sound the horn constantly.
Sorry to hear that happened . If you can call me at Grant Products i may be able to help. 956-542-0202
Call GRANT Products for assistance 956-542-0202
donde puedo conprar el kit
Se puede comprar por Amazon, Summit Racing , Jegs , Speedway Motors o tambien en el Oriely's aveces eln el NAPA tambiem.
No se si estas fuera del U.S.A. , pero el lugar mas facil a comprar los kits y volantes cuando no viven en el U.S.A. es por Amazon. Si viven en el Estados Unidos se pueden comprar por Summit Racing.com, JEGS.com, Speedway Motors.com .... etc.
it shouldnt have taken 15 minutes to describe a 30 second job
i hear you . :o)