Dual Axis Solar Tracker Arduino Project Using LDR and Servo Motors
HTML-код
- Опубликовано: 6 сен 2024
- Hello and Welcome to The IoT Projects. In this video, you will learn to make a Dual Axis Solar Tracker Arduino Project Using LDR and Servo Motors in Step by Step manner. In this project, we are going to use some Light Sensitive Sensors like (LDR) to track the sunlight and direct the solar panels toward the areas that Increase their efficiency. I have divided the video into 7 segments:
1. Components required for this project.
2. Working Principle of LDR Sensor.
3. Project Simulation.
4. Wiring all the Components.
5. Programming Arduino.
6. Printing and Mounting all the body parts.
7. Our Final Project.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Dual Axis Solar Tracker Arduino Project Using LDR and Servo Motors
Requirements:
1 x Mini Breadboard: amzn.to/2NP2UKL
1 x Arduino UNO: amzn.to/2L0iZf2
2 x Micro Servo - SG90: amzn.to/2NRXXAy
4 x LDR ( Photoresistor) Sensor: amzn.to/3kiHz8r
4 x 10k-ohm resistors: amzn.to/2NTPtsF
2 x 10k Potentiometer: amzn.to/2MgRMWz
3D body parts Design ( Download from below)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► Dual Axis Solar Tracker Arduino Project Using LDR and Servo Motors
Written Tutorial Link: iotprojectside...
Download the Tinkercad Dual Axis Solar tracker simulation file: • Tinker Card File on De...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#dualaxissolartracker #solartracker #arduino #ldr #servomotors #suntracker #arduinoprojects
--------------------------------------------
---------Our Previous Projects---------------------------------
► RFID-Based Attendance System using NodeMCU with Website and Database
• RFID Based Attendance ...
► Connect RFID to PHP and MySQL Database with NodeMCU ESP8266
h • Connect RFID to PHP an...
► ESP8266 Based Smart Kitchen Automation & Monitoring System || ESP DASH Library
• Video
► ESP8266 Portable WiFi Repeater
• Portable Wi-Fi Repeate...
► Portable ESP32 WiFi Repeater/Range Extender || ESP32 NAT Router
• Portable ESP32 WiFi Re...
--------------------------------------------
***********************
Follow us on Social Media:
► Facebook: / iotprojectsideas
► Twitter: / theiotprojects2
► Website URL: iotprojectside...
************************
Please Subscribe to this Channel and Never Miss any Future Projects
► Channel Link: / @iotprojectsideas
Thank You for Watching
~-~~-~~~-~~-~
Please watch: "Relay Control with Arduino & DWIN HMI Display"
• Relay Control with Ard...
~-~~-~~~-~~-~
► Dual Axis Solar Tracker Arduino Project Using LDR and Servo Motors
Written Tutorial Link: theiotprojects.com/dual-axis-solar-tracker-arduino-project-using-ldr-servo-motors/
The video tutorial is concise and clear.
Thanks
How to download 3d parts file
which wires do you use for the double connections?
What screw used here can anyone tell me
which voltage and wattage solar panel we can use here ??? ... please reply
Where I can buy 3d parts design, please?
How to download 3d parts
Which languages used in the code?
What is the name of the program you used for the simulation? Please can you share its name?
Why is tolerance taken as 90?
great video
Thank you so much!
where are the dimensions of 3d printed parts on your website?
Where is 3d parts printing file
library what is needed in the Arduino IDE?
I have a comment, can i use Mg996r instead of instead of sg90??
Gud explanation ❤
What is the name of the program you used for the simulation?
Hi Thanks for the great tutorial, what program do you use for the arduino simulation please
Tinkercad
Once I done circuit connections and start simulated in tinkercad the motors are not rotating while increasing the light source on LDR please give solution sir
the code is wrong, same for me
HEY THE CODE IS NOT WORKING PLS SEND A NEW ONE
Printing mounting kaha se hoga
What size of the solar cells
bro there is no mention for the tensiometers in the code
Where is the 3d printer file 😢
I need 3d parts design file
Im trying to do this project with digital ldr sensor, can you help me ?
hey there, use BH1750FVI digital sensors
3d printer file???
bro help me, it is not working for me. I followed all steps correctly that is mention by you
Where you getting struck?
@@TRENDINGVIBERZ hi I did it but the vertical is moving
pls give me feedback
Trust me don't connect the servo motor from the 5v pin
Brother where is the file
can you provide the dimension please
What kind of mounting app you use to print
I need this project for can please sell on me my location pakistan peshawar
Can it use only 1 LDR?
No way!
Please provide the 3d model file
@Aditya Mishra please send it to me
@Aditya Mishra your welcome ...send your personal facebook account
How do I communicate with you
@Aditya Mishra Show me the design
@Aditya Mishra please
In the fastest time
Code is here for the who doesn't have Tinkercad account: #include
Servo horizontal; // horizontal servo
int servoh = 180;
int servohLimitHigh = 175;
int servohLimitLow = 5;
// 65 degrees MAX
Servo vertical; // vertical servo
int servov = 45;
int servovLimitHigh = 60;
int servovLimitLow = 1;
// LDR pin connections
// name = analogpin;
int ldrlt = A0; //LDR top left - BOTTOM LEFT dvert || dvert > tol)
{
if (avt > avd)
{
servov = ++servov;
if (servov > servovLimitHigh)
{servov = servovLimitHigh;}
}
else if (avt < avd)
{servov= --servov;
if (servov < servovLimitLow)
{ servov = servovLimitLow;}
}
vertical.write(servov);
}
if (-1*tol > dhoriz || dhoriz > tol) // check if the diffirence is in the tolerance else change horizontal angle
{
if (avl > avr)
{
servoh = --servoh;
if (servoh < servohLimitLow)
{
servoh = servohLimitLow;
}
}
else if (avl < avr)
{
servoh = ++servoh;
if (servoh > servohLimitHigh)
{
servoh = servohLimitHigh;
}
}
else if (avl = avr)
{
delay(5000);
}
horizontal.write(servoh);
}
delay(dtime);
}
ur a legend is this all?
@@Phantom_Was_Here69 yea
3d printer file???
3d printer file???