Thanks mate enjoyed that only just getting into pcps I think that's the way forward for me brake barrel with a spring is too noisy and CO2 isn't really powerful enough.😊
you can get close to sub 12 with co2 only down side is if your out in the cold the power can drop and the same on a warm day power will rise. thats the only issue its temp dependent
@@peasngravyproductions3728 thanks that was what I was wandering i plan on getting a crosman 2240 and converting it but I also plan on getting a pump as well and a tank later on now
If your in the uk don't us a 2240 pistol as hpa will put it right over start with a 2250b or XL. Stay safe. If your not in the uk they stay within your country laws
Ayup mate, I’m interested in hpa’ ing my 2250xl, the valve has already been modded & pinned, (I didn’t know you did it), can you do the necessary work on the cylinder & valve? Also can you supply the gmac drop block? I have my divers bottle charged up, so what bottle do I need to charge up & fit to the drop block? I’m a bit wet behind the ears with it all! Any help would be greatly appreciated!
Evening Pete, the valve needs a new head making to seal the valve end of the tube this is called a disco head which I make and supply, your tube needs the threads cut off the cap end and then redrilled to take the drop block which I can also supply with a 20mm drop. I also have brand new 13ci bottles which again I can supply
@@peasngravyproductions3728 That’s amazing mate, I can strip the gun no problem, how much do you charge for the whole job? I can strip the gun down & send the cylinder etc to you no probs, what about the filling tube to charge the bottle? Sorry so many questions mate!
Morning Pete, if you want the valve tuned it's a 10er it's normally 15 but as your going hpa your swapping heads so the tuning work is done on the valve body. The disco head is 15 and I make to order. To cut and mod your tube is 10er, supplied drop block with 20mm extra drop is 45 and a brand new bottle 13ci running 800psi is 55. I assembled the gun leave over night to check for leaks then post 48hr parcel force recorded which is about 12quid. 2 to 3 day turn around from when I get it. The bottles come with an 1/8" standard fill nipple which you can connect to a whip from your stirrup pump, dive bottle or hpa home compressor.
@@peasngravyproductions3728 Ayup mate, thank you very much for your help & info, & thanks for being patient! I’ll be in touch soon to book it in in due course!
@@peasngravyproductions3728 Ayup Dave, can you give me your address to send my 2250xl over? Can you please do the necessary work as we discussed earlier? Do you need the stock leaving on or would it be ok without? It’s just easier to fit in a box I have that’s all! Ooh & if you give me your bank details I can pay you when you are ready! Pete.
Hi - I'm very interested in HPA converting my Crosman 2250 and require information on valve pinning plus valve modification service as I do not want to use a POWERLET ELIMINATER and rather adapt the 2250 MAIN TUBE as a plenum as you suggest. If you can help and are you available to do the valve pinning plus valve (Drop box to tube modification can I get your details?
Thanks for the prompt reply, excellent news, so do I purchase the parts from you or buy them and send them to you? How long is the usual turn around for a job like this and how is payment arranged etc.
I can make/supply everything that's needed. All I require from yourself is the bare gun, no stock, no silencer and no scope. Payment will be discus after the job is done, various ways to pay not an issue. As youtube blocks phone numberd and emails addresses unless am doing something wrong you can find me in one of my groups on Facebook or mewe
Thanks mate enjoyed that only just getting into pcps I think that's the way forward for me brake barrel with a spring is too noisy and CO2 isn't really powerful enough.😊
you can get close to sub 12 with co2 only down side is if your out in the cold the power can drop and the same on a warm day power will rise. thats the only issue its temp dependent
Well am pleased your pleased, need any help shout up as I have just about all the bits you will need. All the best for the new year
Im curious about the conversion kit does the tube act as a sort of tank or would i need to get a tank
You need to add a bottle to the drop block but the gap between the drop block and valve head acts like a reservoir of air
@@peasngravyproductions3728 thanks that was what I was wandering i plan on getting a crosman 2240 and converting it but I also plan on getting a pump as well and a tank later on now
If your in the uk don't us a 2240 pistol as hpa will put it right over start with a 2250b or XL. Stay safe. If your not in the uk they stay within your country laws
@@peasngravyproductions3728 thanks and I do plan to stay safe and well within the laws
Ayup mate, I’m interested in hpa’ ing my 2250xl, the valve has already been modded & pinned, (I didn’t know you did it), can you do the necessary work on the cylinder & valve? Also can you supply the gmac drop block? I have my divers bottle charged up, so what bottle do I need to charge up & fit to the drop block? I’m a bit wet behind the ears with it all! Any help would be greatly appreciated!
Evening Pete, the valve needs a new head making to seal the valve end of the tube this is called a disco head which I make and supply, your tube needs the threads cut off the cap end and then redrilled to take the drop block which I can also supply with a 20mm drop. I also have brand new 13ci bottles which again I can supply
@@peasngravyproductions3728 That’s amazing mate, I can strip the gun no problem, how much do you charge for the whole job? I can strip the gun down & send the cylinder etc to you no probs, what about the filling tube to charge the bottle? Sorry so many questions mate!
Morning Pete, if you want the valve tuned it's a 10er it's normally 15 but as your going hpa your swapping heads so the tuning work is done on the valve body. The disco head is 15 and I make to order. To cut and mod your tube is 10er, supplied drop block with 20mm extra drop is 45 and a brand new bottle 13ci running 800psi is 55. I assembled the gun leave over night to check for leaks then post 48hr parcel force recorded which is about 12quid. 2 to 3 day turn around from when I get it. The bottles come with an 1/8" standard fill nipple which you can connect to a whip from your stirrup pump, dive bottle or hpa home compressor.
@@peasngravyproductions3728 Ayup mate, thank you very much for your help & info, & thanks for being patient! I’ll be in touch soon to book it in in due course!
@@peasngravyproductions3728 Ayup Dave, can you give me your address to send my 2250xl over? Can you please do the necessary work as we discussed earlier? Do you need the stock leaving on or would it be ok without? It’s just easier to fit in a box I have that’s all! Ooh & if you give me your bank details I can pay you when you are ready! Pete.
Hi - I'm very interested in HPA converting my Crosman 2250 and require information on valve pinning plus valve modification service as I do not want to use a POWERLET ELIMINATER and rather adapt the 2250 MAIN TUBE as a plenum as you suggest.
If you can help and are you available to do the valve pinning plus valve (Drop box to tube modification can I get your details?
Yes I can do all the work for you no problem. DROP BLOCK, DISCO HEAD, TUBE MOD, VALVE TUNE, VALVE PIN.
Thanks for the prompt reply, excellent news, so do I purchase the parts from you or buy them and send them to you? How long is the usual turn around for a job like this and how is payment arranged etc.
I can make/supply everything that's needed. All I require from yourself is the bare gun, no stock, no silencer and no scope. Payment will be discus after the job is done, various ways to pay not an issue. As youtube blocks phone numberd and emails addresses unless am doing something wrong you can find me in one of my groups on Facebook or mewe