wow. Giving us this tip is most definitely a game changer. This shows a lot of embroidery channels hold back information so we don't become a competitor. You are so generous. Thank you!
You really out here helping and motivating ppl!!! I really appreciate you and your channel. I just need more of your confidence to invest the money into it, but it builds with each video I watch. Thank you
🙏🏾 No worries. When ever your ready. Start small. I started with a cameo 3. My mom wanted some shirts made and asked me to find a company. I saw a RUclips video on the cameo a day before and suggested we went 50/50 an purchase one on amazon. I already had a heat press in my garage I had purchased on e bag years before because I knew I wanted to make shirts. After making my moms shirt a few days after the cameo came I decided to make a video about the problems I had to help people avoid the issues. Then Friends started asking me to make stuff when they saw I had my own customs shirts $$ so on and so forth. Start with one and build. Put it like this. Your money is in your bank account earning you 0.025 percent in interest per month. Do you think you can spend some of it and make yourself more than that each month with one of the machines which ever you choose? No brainer. Hope that helps. Just use my link when you buy. 😂😂😂😂😂 come back and thank me after the machine payed for itself in a month maybe two as a beginner.
Theme music bangs & MUCH THANK YOU for showing us how to get busy with embroidery. I got a Brother PE800 last month based on research and seeing your videos on hats & patches and it lasted a month, no joke a month. It started really malfunctioning like every 50 stitches something would mess up. At any rate I didn't upset that the brother pe800 messed up on me so quickly & me losing money. I saw it as sign to go all in and get a real commercial machine. You said something in a previous vid that made me just go all in, you said to just jump in even if you're not ready. As a result i'm getting my funds in order to buy a Ricoma from seeing your vids ~ I appreciate what you do and much respect!
Oooo good one ❣️👌👍.. Got a story for ya. I used to frame pictures. We had to use glass cleaner of course on the inside glass. Except we had to use air hose to blow off border of pic, well border matt had texture. So I'd use a separate shop rag slightly dappened with glass cleaner. While blowing off matt took rag tenderly but quickly over matt took lint particles off. Because once you put that over it magnified the micro particles the eye couldn't see.😳😬😀 That's how I could shuffle out slot of work and made good money! 👍
This is what I was saying bro. Mighty Hoop is a cheek clap. I can get the same thing for less and include it in an embroidery machine package from the start. I know this is an old video. Hat looks good.
Hi. How do you increase the sewing area of your cap setting? The design you have on your hat is much larger than mine. I have a ricoma mt 1501 as well. Thanks in advance.
The 75/11 needles the machine comes with work fine for me both for 3D puff and richardson. They test the machine with richardson hats before they ship it out.
@@adubbproductions you are awesome you should give classes through ricoma Im new to the whole process and I have been taught alot by you and your videos .Thank you so much If you would be interested in giving me some private classes I would pay you for them. you have a email i can contact you at?
A customer brought me a hat to get embroidered and it was like not too hard. How do I make it more straight and not wrinkly? Also how do I bring my design closer to the rim of the hat. I did one and it was too high! Anything would help. Thank you.
Disturbing effect? Like you your design is not liking up? That has nothing to do with your presser foot. It’s not lining up because it isn’t stable. If it’s moving it’s not gonna line up. You are not stabilizing properly. Nothing to do with the presser foot everything to do with the material being stable.
You need to adjust your cap driver as low as possible and tighten you hoop as tight as possible… you can still see slight registration issues in the upper part of the hat.. Slow down the machine while running the embroidery and technically your not supposed to eliminate the underlay stitches because it’s a guide for your final satin or tatami finish stitch…
wow. Giving us this tip is most definitely a game changer. This shows a lot of embroidery channels hold back information so we don't become a competitor. You are so generous.
Thank you!
You really out here helping and motivating ppl!!! I really appreciate you and your channel. I just need more of your confidence to invest the money into it, but it builds with each video I watch. Thank you
🙏🏾 No worries. When ever your ready. Start small. I started with a cameo 3. My mom wanted some shirts made and asked me to find a company. I saw a RUclips video on the cameo a day before and suggested we went 50/50 an purchase one on amazon. I already had a heat press in my garage I had purchased on e bag years before because I knew I wanted to make shirts.
After making my moms shirt a few days after the cameo came I decided to make a video about the problems I had to help people avoid the issues. Then Friends started asking me to make stuff when they saw I had my own customs shirts $$ so on and so forth. Start with one and build.
Put it like this. Your money is in your bank account earning you 0.025 percent in interest per month. Do you think you can spend some of it and make yourself more than that each month with one of the machines which ever you choose? No brainer. Hope that helps. Just use my link when you buy. 😂😂😂😂😂 come back and thank me after the machine payed for itself in a month maybe two as a beginner.
Extremely good tip never thought that something so simple as water would make a difference in embroidery.
It’s the little things.
Theme music bangs & MUCH THANK YOU for showing us how to get busy with embroidery. I got a Brother PE800 last month based on research and seeing your videos on hats & patches and it lasted a month, no joke a month. It started really malfunctioning like every 50 stitches something would mess up.
At any rate I didn't upset that the brother pe800 messed up on me so quickly & me losing money. I saw it as sign to go all in and get a real commercial machine. You said something in a previous vid that made me just go all in, you said to just jump in even if you're not ready.
As a result i'm getting my funds in order to buy a Ricoma from seeing your vids ~ I appreciate what you do and much respect!
You have success written all over you. You have the smarts, drive and the mindset. I don’t believe there’s nothing you can’t do!
BEST ADVICE EVER!! I went thru 5 needle breaks despite using a 80/12 needle. 😩 lol Thanks 🙏🏽
Thanks for the tip! Waiting on my mighty hoops to arrive tomorrow. Can’t wait to try. Sounds like a great move with video direction.
Yea. It just makes sense. I’ll still show how to make stuff but concentrate more on my products and business tips etc.
Oooo good one ❣️👌👍.. Got a story for ya. I used to frame pictures. We had to use glass cleaner of course on the inside glass. Except we had to use air hose to blow off border of pic, well border matt had texture. So I'd use a separate shop rag slightly dappened with glass cleaner. While blowing off matt took rag tenderly but quickly over matt took lint particles off. Because once you put that over it magnified the micro particles the eye couldn't see.😳😬😀 That's how I could shuffle out slot of work and made good money! 👍
Put the glass over it
This is what I was saying bro. Mighty Hoop is a cheek clap. I can get the same thing for less and include it in an embroidery machine package from the start. I know this is an old video. Hat looks good.
I love watching your ricoma videos
Thank you. I like making them. People need to see that it works just fine.
Love this tip! Any tips for small lettering at the bottom of logos? I can't get it to stitch straight
I haven't done hats yet but this is an amazing tip.
I have alot more where that came from.
Great tip! I can’t wait to try it
Thanks for this informative video. Wow 🤯 who would of thought of that. Thanks a mill your the man
No problem Lucy. You are welcome. Thanks as always.
😲 Appreciate you sharing that knowledge!
Of corse. I’m gonna give you all the information I can.
Hi. How do you increase the sewing area of your cap setting? The design you have on your hat is much larger than mine. I have a ricoma mt 1501 as well. Thanks in advance.
I’m looking to start embroidery. Would you say start by hand ? Or jump to machine??
thanks for this tip... much appreciated!!
Awesome Tip!
This is 🔥
What tips do you have when embroidering on heavy jackets, shirts, hoodies, and denim?
NICE!! thanks, a fabric steamer works better
My friend I’m having trouble moving the needle away from the belt that grab the hat
loving these videos what size needles do you recommend for 3 d puff and for richardson hats
The 75/11 needles the machine comes with work fine for me both for 3D puff and richardson. They test the machine with richardson hats before they ship it out.
@@adubbproductions you are awesome you should give classes through ricoma Im new to the whole process and I have been taught alot by you and your videos .Thank you so much
If you would be interested in giving me some private classes I would pay you for them. you have a email i can contact you at?
No problem. Thank you. I appreciate that. I do offer consultations but it’s on my own threw my website Adubbproductions.com
I need training on the 1501 tc and digitizing in luxe
I having trouble with the Y size error my needle hit the belt that holds the cap what do you advise to do ?
Good advice Thank You!!!!👍🏻
No problem. Thanks for watching Fidel.
Smart
A customer brought me a hat to get embroidered and it was like not too hard. How do I make it more straight and not wrinkly? Also how do I bring my design closer to the rim of the hat. I did one and it was too high! Anything would help. Thank you.
Do you have a video adjusting your presser foot im getting a shadow effect
Disturbing effect? Like you your design is not liking up? That has nothing to do with your presser foot. It’s not lining up because it isn’t stable. If it’s moving it’s not gonna line up. You are not stabilizing properly. Nothing to do with the presser foot everything to do with the material being stable.
How close can you get the logo to the hat brim?
You truly want us to win!!!
Of corse. I can’t be out here winning by myself. That’s no fun. I need more travel buddies.
Thanks
No problem. Thanks for watching.
Much needed
Are you still digitizing
Steaming makes the difference!
Indeed. Big time.
Hey adubb I just got the em 1010 but my hat part not work like the bobbin is not catching can u help me plz
Sure, you would need to schedule a consultation at adubbproductions.com
where they you get your mighty hoop from?
Ricoma. Right here. Ricoma SHOP link
shop.ricoma.com?referral=allan-wade
How long did that take to embroider?
YOUTH booty shorts👀
😂😂😂
I'm just being silly
I ain’t touching this one. You are on your own.
Hey can sawgrass 400 use WiFi
No. I believe the WiFi feature was put into the SG500 and SG1000.
You need to adjust your cap driver as low as possible and tighten you hoop as tight as possible… you can still see slight registration issues in the upper part of the hat.. Slow down the machine while running the embroidery and technically your not supposed to eliminate the underlay stitches because it’s a guide for your final satin or tatami finish stitch…
Thanks for the tips.
It’s the simple things… 💦.
👀😂😂😂😂