Это видео недоступно.
Сожалеем об этом.
Fixing Saab 9-3 Window Switches for Free!!
HTML-код
- Опубликовано: 13 авг 2024
- Your windows work normally when using your convertible roof switch or the passenger door switch, but cannot be operated from the driver's side switches? This video will help you to resolve this.
That's just what I needed to see... Drivers window stopped working this morning... I'll get someone who is good at stripping stuff out and not breaking anything before putting it back in order.... Thank you. Great vid.. will follow
Have to do this on my 06 aero, worked fine, came back 45 minutes later and nothing. thanks for the vid to make it easier! Also, love that you just walk away from the door panel leaving it hanged in disgrace and disgust like a lover's betrayal.
Hahaha! Love that analogy :)
Sometimes it's just that simple, thanks for showing us how easy it can be, now I'ma try this on my friend's Saab and see if it works, it's such a lovely car.
Super , ich hatte dasselbe Problem an meinem SAAB Cabrio.
Danke für den Hinweis.
Mein Schalter funktioniert nach der Reinigung mit Kontaktspray auch wieder.
I had the same problem.
Thank for your advice.
I cleaned the switch as shown and now it works again.
Very useful i will try mine as the drivers window just suddenly stopped working was fine yesterday today nothing
Hopefully no longer going to have to open my door at the mcdonalds drivethrough
Made me laugh -I’ve been telling my daughter that as soon as my window works I’m treating myself to a drive through 😂
I've had this Saab twice and I can confirm the windows always break... And yes going through McDonald's is always fun- like open the door and get out
Nice. So this is the process removing the convertible door card, very helpful thank you!
Your now my go-to Saab RUclipsr x
It worked perfectly mate, big thank you for the tip 👍👍👍
Yep same as Gerard....great vid and banked for future reference...I have a 9-3 convertible and expect this to happen to me one day. 👏
When the PDM is replaced, does the new part have to be married with the TEch2 device or will it work without it? Colleague "Saaber" says that it will work without problems, except that it will be seen on the Tech2 device that it is the second PDM number
Did you just pull away the door card from the bottom or up and away to get over the hooks ?
Any idea what fuse number is for driver side window on an 06 9-3 ?
thanks for guide on CORROSION
Always use an eraser on the back of a pencil to clean contacts ...been doing it for 40 years
That done the job perfect thank you very much 😁
When putting the door panel back on, do you need to hook the bottom part first and then work your way up? Or top down, by inserting the door lock barrel first?
Top down
In the video, you hooked the bottom hooks in first, then put the door lock pin in, is that correct? I’ve just done a speaker upgrade and I’m having trouble getting the hook at the bottom closest to the speaker flush, so that part of the door card just doesn’t want to sit flush against the door card. There must be a technique?
I'm slightly confused; at around 1:50 you take the mirror controls off. You have a bit of a look at the thing, but there's no sign of you disconnecting anything. Is there some wiring connected to those controls?
Yes, sorry. There's a single loom that you need to unplug from the back
@@SaabUnleashed Thank you 🙂
Mine unplugged itself when I removed it. It appeared his did, too.
Greetings from Croatia
I have the same Saab the same age.
My problem is the rear window on the passenger side.
I can't put it down.
I could have a problem with the window lifter.
Hello again and it is a beautiful car.
I didn't see this. Depends if the window goes down with the roof switch or not. If it doesn't, the issue would be with the window regulator.
Hi nice work. Not sure if this is my issue but some forums suggest so. Have no window, mirror or locking power drivers side (RHD 04 Aero vert) You didn't happen to note the part number of the unit did you? With comfort opening & pinch protection? Thanks
If you have lost all of those things, it's more than likely the wire loom that's the issue, at the door hinge in the rubber pipe. Constant bending of the wire can eventually lead to it breaking
@@SaabUnleashed thanks for reply. It coincided with "lock system failure" on my SID, but Tech2 showing no DTC's. Bizarre Saab stuff, harder when much of the info & part numbers relate to LHD. I'll post a resolution when I have one. :)
Great video hoping this will cure mine
Thank you, one day I'll probably need this. Consider this video saved, plus you get a like from me. 👍
Nice one! Thanks for sharing
Thank you very much, so helpful!
Great job 👏 thanks
Do you know how to replace the outer doorhandle?😉