Got my kit yesterday. First thing i noticed when i got on the machine was that foot was on the outside of the board and id have to tuck in to use them. These will be a game changer. Thanks Donnie.
Hi, just received from DK customs, my footboard extensions and put them on as you instructed in your video, your instructions were perfect. I’m no motorbike, mechanic or car mechanic, I just ride my trike. Thanks again, free wheeler Daz from Australia
I just took delivery this morning of the 3. Came home and installed Pintle floor board extensions, heel shifter, vin hider, Heim joint shift linkage, gremlin bell, smoked led tail lights, extended brake pedal, sissy bar with quick release brackets, front turn signal led, windshield, and windshield trim led’s, and lower vent led’s. Oh and saddleman Road Sofa extended reach seat with backrest.
Thanks mate showing me how to put on those floor board extensions. I’ve ordered a set from DK customs i’ve got a 2022, free wheeler i’m from Australia Love your site
Donnie, thanks for the head's up vid. I was pretty sure that these would fit on the RG3 as I put these on our previous Tri-Glides. "Every inch matters." LMAO Thanks bro!
Great video.. again. I'm looking forward to seeing the passenger floorboard relocation. I have a 2021 freewheeler, and that might be something that will benefit my wife. Godspeed
Nice video! Great step-by-step video. 👍 Very Sharp Looking RG3. 🙂 I believe you are going to be even more impressed once you get out on a long days ride!
Thanks for sharing. I just ordered the extensions for my Tri Glide. Yes, that one bolt on the right side is a mother to get off. The instructions don't mention the wire on the left side. That should have been mentioned. DK Customs isn't as good as some might think. Screw up that wire and you are done.
@@donniewieburg We will certainly look into improving the instruction but for others that may see this comment... step 10 of the instructions "Left side: You will need to place a block of wood (or something) under the assembly to prevent it from disturbing the wiring and/or cabling."
I’m loving it! Everything is working out great! I jump on this more than I did my 2020 RG Special 131. I need to talk with you about the suspension though. Little rough for my liking. Overall, a wonderful machine!
Morning I tried to remove the bolts this morning to put the extension on it, and it took me 30 minutes to loosen. When I started to tighten the brake side of the bike, the front bolt was very easy, and the rear bolt was very hard.
Bro, the amount of thread lock from the factory is over kill!! I bent the front bolt taking it out. Cleaning the threads out is the best bet for sure. Hope you like that extension kit! I love it.
I added the CIRO 3D framed mounted highway pegs to my R/G 3. Will the DK Custom floorboard extensions still work? Will I need 2 additional spacers? Thanks
![Lil Uzi Vert - Chill Bae [Official Music Video]](http://i.ytimg.com/vi/D7F42F_JM3U/mqdefault.jpg)
Got my kit yesterday. First thing i noticed when i got on the machine was that foot was on the outside of the board and id have to tuck in to use them. These will be a game changer. Thanks Donnie.
Hi, just received from DK customs, my footboard extensions and put them on as you instructed in your video, your instructions were perfect. I’m no motorbike, mechanic or car mechanic, I just ride my trike. Thanks again, free wheeler Daz from Australia
Awesome! Thanks for your comment! Enjoy the extra room!!
Thanks for the video, I didn't know that DK had the trike floor board extenders. I'll be ordering a set for my wife's trike!
I just took delivery this morning of the 3. Came home and installed Pintle floor board extensions, heel shifter, vin hider, Heim joint shift linkage, gremlin bell, smoked led tail lights, extended brake pedal, sissy bar with quick release brackets, front turn signal led, windshield, and windshield trim led’s, and lower vent led’s. Oh and saddleman Road Sofa extended reach seat with backrest.
Nice!! Congrats, man!! Gettin it decked out for sure!!!
Thanks mate showing me how to put on those floor board extensions. I’ve ordered a set from DK customs i’ve got a 2022, free wheeler i’m from Australia Love your site
Thanks, Darrell!! You’ll love them!!! Appreciate you watching my channel, from down under!!! 👊🏼😎
Donnie, thanks for the head's up vid. I was pretty sure that these would fit on the RG3 as I put these on our previous Tri-Glides. "Every inch matters." LMAO
Thanks bro!
😆😳 You know it!!! 👊🏼😎
Great video.. again. I'm looking forward to seeing the passenger floorboard relocation. I have a 2021 freewheeler, and that might be something that will benefit my wife. Godspeed
Will do, brother!!
Perfect. Instructions were point on. Thanks.
Nice video! Great step-by-step video. 👍
Very Sharp Looking RG3. 🙂
I believe you are going to be even more impressed once you get out on a long days ride!
Hell yeah!! Can’t wait for the road trips!!! Thanks to all of ya @DKCustomProducts for doing what you do for the riding community!! Much respect!! ✌🏼😎
Great video and install tips, I need to do that on my trike, thanks ✌️
Thanks, Hollywood
@@donniewieburg on a side note what torque wrench are you using? Specs that kinda info, thanks really enjoying the Chanel ✌️
@@hollywood93c87 it’s a Harbor Freight torque wrench with 1/2” drive. Other specs? Hell, I don’t know! It torques! 😂
@@donniewieburg ok thanks
Thanks for sharing. I just ordered the extensions for my Tri Glide. Yes, that one bolt on the right side is a mother to get off. The instructions don't mention the wire on the left side. That should have been mentioned. DK Customs isn't as good as some might think. Screw up that wire and you are done.
Yes it is! I bent it getting it off! Things do get overlooked from time to time! Maybe a fine adjustment to the instructions. 👊🏼😎
@@donniewieburg We will certainly look into improving the instruction but for others that may see this comment... step 10 of the instructions "Left side: You will need to place a block of wood (or something) under the assembly to
prevent it from disturbing the wiring and/or cabling."
Thank you for the clarification!! I saw it, pointed it out in the video as well during the install.
@@donniewieburg how are you liking the RG3?
I’m loving it! Everything is working out great! I jump on this more than I did my 2020 RG Special 131. I need to talk with you about the suspension though. Little rough for my liking. Overall, a wonderful machine!
Morning I tried to remove the bolts this morning to put the extension on it, and it took me 30 minutes to loosen. When I started to tighten the brake side of the bike, the front bolt was very easy, and the rear bolt was very hard.
Bro, the amount of thread lock from the factory is over kill!! I bent the front bolt taking it out. Cleaning the threads out is the best bet for sure. Hope you like that extension kit! I love it.
Looks good 👍
Thank ya!!
Thank you for your information on this.
I added the CIRO 3D framed mounted highway pegs to my R/G 3. Will the DK Custom floorboard extensions still work? Will I need 2 additional spacers?
Thanks
You will need one additional spacer and a longer rear bolt for the brake side.
😎👍👍
👍👍
Smart woman
thats nice
Good-Day: Donnie; How do you like not having a heel shifter... Have a bless day.......
I’ve always had a problem with the heal shifter. Never ever liked it. Idk, might be my sport bike days….
I see what you did there. 😂
😂😆😂😆 😳
Could you tell me how tall you are so I can get an idea about your handlebars?
5’11”
You skipped over the most important parts (to me) I watched your video to learn how. Please don't skip over anything.