Spicer 6800 Full Break Down
HTML-код
- Опубликовано: 25 авг 2022
- VEVOR 22L Industrial Ultrasonic Cleaner #vevor
Discount code VVS10 can save another $10.
bit.ly/3PmRubH
For more hot deals: bit.ly/3pQe4OS Up to 50% off, lowest price online.
6203-12 2RS 3/4" Ball Bearing
amzn.to/3KqL5L3 Авто/Мото
Interesting how much you know about all the differences and design flaws of each. I probably won't remember a fraction of everything you said, but I now understand a lot more about them all... Thumbs Up!
Blow up and rebuild a few hundred of them and your bound to learn something :) Glad I could help you learn!
Great video.
Yes, a lot of knowledge. I would suggest a 3x5 card beside each transaxle, denoting the brand and the model # and if it is a clone and if so, of what. Also, in closing, a summary statement about each unit and its strengths and weaknesses and best application. BTW, the early comments about axle length, very helpful.
The title might read, "Comparing the Spicer 38492 and the Ferndock 395u73 and the Boonsford 89V"
A separate video of the parts washer would help this viewer make the most of his screen time.
All this sounds picky, and I apologize for that. Keep the info coming! I am grateful for your sharing your expertise in a useful way!
All very good points. Thank you for a well written comment to think on. Comments like yours are the most helpful in upgrading and changing to help the viewer.
That's alot of knowledge!
Great video! Its crazy at the amount of clones and bad designs i can't get over the fact that there wasn't a spacer from factory thats mind blowing
The space thing was my last straw on caring to put it back together. Its complete garbage even a Doc Locker would not save it because of the way the bull gear sits.
@@redneckcomputergeek i locked a spicer for my buddy with that exact same way the bull gear suts and it was terrible one of the worst transmissions i have experienced
@@craftsmancrusher207 hehe I used a spicer when I was first getting into these things, because I didn't want to pop the 801 that was in my machine even though they are pretty stout.
So I swapped one of those in ,and yes I know they are junk.
It was working ok with the original 12hp but was wearing out quick i knew.
Then I got greedy and swapped a 20hp in it.
Pulled it outside ,and the first clutch dump scattered it's guts all over 🤣🤣🤣
Swapped in my built 801 for temporary use and got a mst-206 after that.
Still got an eye out for an 820 ,but not looking hard unless one falls into my lap.
great video .. do you know if all trans spicer 4360-xxx do have the same with?
I am soooo confused. Good video, audio and camera work is great. I learned a lot, except, witch rear end I need to look for.🤔
I just picked up a free Sentinel mower made by Noma with a Spicer trans.. The transmission doesnt drive the wheels. I took a look while i had it in gear and the brake disc spins, but the axel does nothing. Any suggestions? Fixable?
Do you know the wheel spacer lengths for the spicer 5 speed? I lost mine and need to make new ones
So where are the drain and fill plugs?
I was wondering if it would drive without the chain. Thanks
what brand makes a high low 6 speed tranny, I have a tractor with that setup on it but can't identify it
How are Foote transaxles? I know they bolt in place of peerless and spicer units but I’ve just used them for mowing
Foote pre date most of the spicer 4360. But are to spicer what Mazda is to Ford. They are a bit weaker but not by much.
Do you have a link to the big ultra sonic cleaner you used in the video
amzn.to/3tZky00
There is an MST 2. I have one, came out of a Murry with a variab!e speed pulley.
Yes but the case is different in them. Also extremely rare
Any idea what the MST2 is worth?
Renys a maine adventure lol, I'm from Albion
More "Detail" would be ne nice to have...
LOL Sure will get right on that :)
Using a roller chain knowing it's going to stretch over time was stupid of them...
Then again we gotta remember, "it's just a lawnmower" so they pinched the heck out of the buffalo.
And as always,the older stuff is better.
A true roller chain is a lot better than a static chain
4
I do believe these are all JUNK. They make nothing good today.