Range Rover Sport suspension fault - Picoscope vs height sensor!

Suspension warning lights and warning messages can mean a LOT of different things.
And there are a LOT of different components in the system from height sensors, to fuses, to relays, to control modules, to compressors.
Identifying and proving the fault is essential for accurate diagnosis - fault codes are only the start of the process!
Here we have started with fault codes and have moved onto component and wiring tests to prove the fault with our PicoScope 👍

[@rovercoupe120]

thank you for a decent explanation, and that has given me a clearer understanding of how things should work and behave, big thank you.

[@markpiercy133]

Excellent explanation. Thanks for the video👍

[@kevwatkins]

Another great video. Thanks Joe.

[@geoff3172]

Jas. ..great video. .thanks for sharing your knowledge

[@admiralking]

Fantastic video!! Thank you for your efforts.

[@kevwilliam]

Great video very informative thanks 👍

[@johnshuttleworth6879]

I’m going to get some employees so I can play with my pico 👍 great video ❤️

[@kaibintech]

Great video! Subscribed.

[@rickfranke4886]

Awesome mate

[@ousmanesarr7287]

How do you like the new pico with the isolate ground?? .i have the older 4 channel and am thinking connecting a separate ground for every channel little annoying

[@andreaswitten]

Very helpfull video, thx. Could u detail ur wire mangement again .Mean between Pc -pico -voltmeter(brand)-car.. .

[@mastergray810]

well done
just I have a point what names this program

[@PoLicEkSa07]

Hi, i have RR Sport supercharged 2006,
Every time i turn on the engine, The off road goes in mode with itself without pressing the button! And the workshop doesn't know how to fix it, Could you give some advice?

[@user-em7bb9tw8j]

Thanks a lot

[@garydsouza2335]

hi excess height keeps going back up on my 2014 RRS.. Any clues please what i can check

[@mikeylovell5256]

Hi pal my compressor failed I put a new one on but still wont rise and how long does it take to fill with air from empty thanks

[@nonilonsotomayor7691]

All terrain module are not respond how to fix

[@Comedyislandwilly]

Hey so my range rover sport drops when I switch off then it blows back up when I start could that be the problem or air leak I got a suspension turn error once when turning right over 30 it feels like the left front wheel is dragging

[@austinuzo7515]

Hello Joe my range rover sport 2015 autobiography shows on its dash board Suspension fault Vehicle lean when cornering what do think is problem?

[@anuraj5080]

Great vdo

[@radmilakrejci8581]

hi, great video, i was just wondering did you get any DTCs on your scan tools for height sensors? you never mentioned what DTCs you got in your video, only customer complaint of instrument cluster message of lowering ride level and 30 mph max red warning.

[@radmilakrejci8581]

sorry I missed that you said it right at beginning 1.05 height sensor out of rance code, my mistake

[@BLACKHAWKTS]

I have problem with height Sensor My car Range Rover 2016 can you help

[@bunlykeo]

Can u share the software?

[@billytremoloband7456]

Hello, have you ever come across issues with 2012 rr sport with 6 pin Hight sensors, ( 2 rear replaced with oe Jlr parts) no fault codes but rear of the car is sitting very high and it is refusing to re calibrate with either autel or sdd, all 5v and grounds appear to be ok and I have single up as far as suspension modules….!?🧐 any information would be greatly appreciated!

[@steverichards1125]

U ever sort this buddy?

[@Mike-yq6jg]

great bit of kit nice vid , can you tell me what make is your light ?

[@joehodgy]

Sealey LED3604 Mike :)

[@Mike-yq6jg]

@@joehodgy is it the 3604 r or g ?

[@Mike-yq6jg]

Forget that last message, a bit slow this morning.

[@COM70]

Hi anyone willing to point me in the right. Direction. I have 0 volts going to my front right ride height sensor. I cannot see any obvious damage to the wiring.left was fine 4.9 volts. Even if someone could point me in the right direction to show how the loom is routed through the engine bay would be hugely helpful. Wiring diagram shows a plug connector half way back to the ride height module but again I’m finding it difficult to trace it around the chassis. Thanks in advance.

[@ousmanesarr7287]

Did you say it was a height sensor fault???. Lol just kidding . good job!

[@joehodgy]

ousmane sarr 🤷🏼‍♂️😅
So I repeat myself a little 😅

[@phill3144]

Its a shame you dont post anymore, you kake great content

[@joehodgy]

Thanks man! Maybe one day I'll invent more days in the week and get back on it :D

[@olasuccessSolutions8686]

Good morning

[@garagekhmer659]

C1A03 rangrover sport 2006 C1A04 C1A06 C1A07

[@bembenutos]

garage Khmer I have code C1A07 - Range Rover sport 2006. Does this relate?

[@garagekhmer659]

hello