GT Power Sound and Light System for Radio-Controlled Cars
HTML-код
- Опубликовано: 15 сен 2024
- GT Power Sound system and Light system for radio control cars is an afford able and very good Simulation sound system that comes with many engine sounds pre installed. GT Power Sound System for RC Cars is very easy to install and configure.
Order one here: bit.ly/2IdbHlU
Support Us: bit.ly/3yqHIzh
Download my 3D models: bit.ly/2H3pxDH
My Social Media: alishanmao.bio....
My Store: onlyflyingmach...
Join Channel for additional Perks: bit.ly/joinali...
Best Featured RUclips MCN: mediacu.be/E00pMvO
New RC Helicopters: tiny.cc/wbrquz
New RC Airplanes FPV Planes: tiny.cc/ybrquz
Newest RC Vehicle and RC Rock Crawlers: tiny.cc/zbrquz
New FPV Racing Drones: tiny.cc/xbrquz
Best Tools and Supplies: tiny.cc/0crquz
Radio transmitters and Receivers: tiny.cc/4crquz
Batteries and Chargers: tiny.cc/acrquz
New RC Boats: tiny.cc/8crquz
My RUclips Channels:
AliShanMao Channel: tiny.cc/alishan...
Gaming Channel: tiny.cc/5s78tz
DIY Woodworking TV: tiny.cc/b4bbtz
Disclaimer: The links to products provided in my video descriptions are my affiliate links. If you order products using those links, there will be no price increase, but I will receive a certain commission on each sales from those links in this description. This commission income supports my family and help me continue to run and manage my youtube channel.
#hobby #drone #airplane #helicopter #autos
Thank you very much!
I'm not good at electronics, but thanks to your video, I was able to connect and configure everything
that puppy was adorable! the product was cool too.
Wow! Not bad for $70.00 compared to $100.00 for just the sound module. Thanks!
Just got it on ebay for $41
Thank you. You the only one that helped.
you are welcome
Thank you very much, great video, straight to the point and easy to understand for old people like me!
Awesome. 👉 You Rock buddy 🙋😉
Hello i have just got one of these units but i found the instructions very bad… i have plugged in my esc to the accelerator with two wires coming out back esc one goes to battery and other two wires? How do I plug in my two motor cables please? As currently my motor wont run…. Also the action of the unit is sporadic I wonder if its faulty?
So where do you put all the installation that was on the table? Inside the RC truck or in the back of the pickup truck?
inside the shell
@@alishanmao ok cool
cool GT power sound and cute puppy hehe
Hello,
thanks for the video is there a way to change the light modes? I read in the manual that I can change it, example to make them all blink. How do we do this?
Not that I know of
Quick question, What are the 2 outputs marked as 1st horn and 2nd horn on the bottom of the right hand side for?
That is for the speakers. One comes with the kit. You can add a 2nd speaker if you want.
It also has two different horn sounds.
1st horn is like a emergency vehicle.
2nd horn is like a car horn.
Well that is how mine came as standard.
I had problems opening the download files as they come so I have only used mine as standard setup.
@@DjMrABeat very true mate 👍🏻
Salam, thanks for sharing the review. Its really help a lot....
Nice product thanks for the great review. I think I will buy one.
Link is in video description buddy :D
Hi, do you have idea how replace the siren or horn? I put same file (wav) but it does`t work
HI! Is it possible to set the system in order to NOT HAVE the signal sound?
not
I also bought it like yours, g.t sound simulator.
the problem is how to change the throttle direction at the start, mine is in a backward position even though the one that should be is going forward?
If you use a Flysky i6s tx then it's easy .. go to the touch screen settings panel (which is a spanner and screwdriver logo) .. then there should be displaying Reverse, End Points, Subtrim and bla3 .. so select Reverse .. and you will see a list of all the channels available depending on how many channels your Rx have .. so firstly you will need to identify which channel is your throttle servo connected to .. for example if throttle is in channel 1 .. so you will see
[Ch1 - Nor] if in this condition your facing the throttle backwards .. so just go ahead and select the Ch1 [Rev] change it to [Nor] .. where Rev stands for Reverse and Nor stands for Normal .. that should solve your problem mate ☺️✌🏻 hope my long explanation helps .. cheers ..
tendrias algun video para el sonido de aviones con el gt power? te agradecieria bastante
how did you connect the power lead and esc and battery together ? What size is the splitter , where can I find one ?
Pretty neat.
Think I'll still rely on my ESS+ sound systems with a separate LED controller, though. This is really nice for the price, but i like being able to modify my sound profiles at will.
Still, well made video, you got me with the use of puppies :)
Can you/someone tell me how to wire the fpv camera servo into a rc car/truck? If you have a 2ch receiver do you just splice it into the steering servo? I have been trying to find a video but have had no luck.
on a separate channel. if you splice it with steering channel then your camera will turn with every move of steering that you do not want.
I own a spectrum DX6R how many channels does it have
I was hoping to find a review of the aircraft version of this; but I guess you never got around to doing that one. I was also wondering if there's a way to change the sounds for this unit? I'm actually looking to try to use it for a sci-fi/prop/costume futuristic gun, and would want to use a different sound file for it.
Hi,Ali,I know this is an older video,but I only recently bought this sound system to use on a Tamiya MAN truck.On my setup,the engine sound seems to be working in reverse to the motor direction.Do you know how i can change this?Also,how do i get the lights to work with my tx?(Turnigy 9x with Frsky internal module and ER9x frimware.)The instruction book doesn't mention the light connections.Many thanks.
Following 👀
Very informative, thanks for posting. Do you know where I can buy this? Will this fit the Tamiya Bruiser ,HG P407?
Link is in video description. how you fit it, is all DIY work
Hello! Sir, very nice explanation 👌🏻 I understood the whole thing but, I have a question - can we not start up the engine by any of the auxiliary switch in the transmitter other than starting up by throttle? Please reply...
No you can't
Great video.
It qappears one would need a separate Lipo battery to power the engine sound system?
depends, I used the same car battery
Where can you purchase this system? And how much does it cost?
Outstanding
I was wondering if you ever did the one for rc airplanes?
The RC car sound lights simulated system will NOT connect to the USB. Setup of Sound and Light Simulation system software says "No device was detected........." no matter what buttons i press. I have followed the instructons.
i never connected to USB. it has enough sounds for my need
Is there a whistle or horn? and if so how would you control it? Thank you
Thanks man for the video very informative
Any time!
wow, this was awesome! Subcribed!
Thanks for the sub!
Great review, I've just got this and I'm having problems with forward and reverse sounds, they are backwards 😕 I push forward and it's the reverse sound, in reverse it's forward full throttle sound, if I switch the controller it's backwards if that makes sense 🤔 I'm using a brushless system and thumb stick controller.
Maybe the channel is reversed on your throttle to control it normally. that is the reason this system is doing that. maybe use the computer software and see if you can reverse the sound channel from there.
@@alishanmao Thank you, I put it into the laptop installed the update, opened the program and there is nothing to change or switch, I can switch it on my controller but it's still backwards 😕 I ended up changing the receiver and transmitter and now it's working.
@@RCJEDI how did you get the program to load on your computer? I cant get mine to connect and I cant find a download to the program anywhere. Help!
how much battery time you lose?
I like the way you present your video because you explain it clearly and step by step. Sir I just want to ask you,if I put police siren,can I use this device and where to connect it?it's a big help for me if you can tell me.thanks...
that depends how many channels your radio has and you can always connect it to another channel
Thanks for the info....
What if you have a blue bullet cable connectors and 6cell LiPo’s?
Is it possible to repeat the calibration of the controller to the gt power?
Assalamualaikum!my problem is when i on,the speaker sound teribble..it has the buzzz sound..whats the problem?hope you can help me solve it..from Malaysia..tq
Can connected use controller futaba 4ywd?
yes
What’s your intro song sounds good for RUclips videos
You try to give the video more brightness it will be great if you do
ok
cual seria la coneccion pra aviones rc con radio specktrum?
Hi also is that have horn sound or only engine sound
only Engine sounds
Do you know the max voltage?
it says in manual 6 to 26 volts.
I would not give it more than 4S hahaha
Are the engine simulator waterproof?
no
how did you do it can you share with me , thank you
Which part?
😎 cool Do they make one for semi trucks? Thanks
this one has a couple of diesel engine sounds trucks sounds that will fit perfect to a semi
Yes they make one called for semi trucks called GT power container truck light and sound system pro
How do I turn off the automatic engine?
como lo configuras en la computadora o pc?
Hi Alishanmao,
I have a Tenergy 7.2v 3000mah NIMH battery for my tamiya semi truck, can I use that battery for this sound module?
should be able to
Thanks i was able to use the battery without issue.i am trying to use number 55 Diesel engine sound, but I don’t hear break sound and police siren sound even I connected channel 3 from receiver to 3rd input on sound module
Hello alishanmao I have the same simulator but turnigy one can you install it in a 3 speed gearbox Tamiya Ford F-350 high lift truck I have it working but can’t seem to find how to use it with 3 speed box ? Can you help ? Thanks in advance
it is only sound simulator that works on Throttle. it has nothing to do with 3 speed or 2 speed or single speed
Ok thank you just wondered so I can’t use the 3 speed or do I splice the throttle lead together with the 3 speed lead ?
Your vids are very informative as well always have a look at your stuff keep it up 👍🏻
You just need to connect throttle lead to this and Throttle out to your ESC. rest 3 speed or 2 speed transmission has nothing to do with it. This one just need throttle signals from your Radio to generate Engine Sounds and RPMs.
Sorry for being a bit unsure about this alishanmao
I know about it works with throttle but the three speed servo is what I need to work what channel do I put it in has only horn connectors left I’m using the acoms techniplus -4 fm that came with it
Battery voltage?
thats realy very cool
I a having problems downloading and setting up software. I am running windows 10. Any suggestions?
i never used the software. I just use it and configure it with buttons
alishanmao thank you
got same issues after installation of the software it i am getting error on the usb it doesnt detect.
AOA bro from where are you plz tell me
wassalam. Pakistan
@@alishanmao bhai esc kitne ka milta hai without online shopping
Bro, If you will buy ESC from a Hobby shop they will rip you off. In Urdu we say (Churi Bohat Taiz he - Knife is very sharp) hahahah
So its best you buy online.
I have many 30A ESCs coupled with 2500kv Custom motors and Self Tightening matching Carbon fiber props to make Fast RC planes or RC Drones. Welcome to buy from me. I will offer dealer and discounted prices. But you must order 4 pcs each time :)
? mine cannot turn on at all
probably faulty
пожалуйста помогите. я случайно сломал карту памяти со звуками которая стоит внутри модуля. можете помочь мне .надо скопировать и отправить файлы мне на электронную почту с вашей sd карты .
I do not have this anymore buddy
супер
Is this waterproof or not?
well not