ELECTRIC WINDOW SWAP ON 99-06 SILVERADO!! (EASY) (HOW TO)

All parts I used are listed down below
Add a fuse tap- Check this out! a.co/d/hIQFeWJ
5 prong relay- shop.advanceau...
12 gauge wire- Check this out! a.co/d/e1EpoYR
FOLLOW ME IN INSTAGRAM @vscojose and my business account @garadgexustoms

[@kwsorrell]

Thank you for the most basic ass info and no help!!! Keep up the great work!

[@AlexLopez-kp1wf]

Appreciate the video bro, I finished my electric window conversion today on my 07 classic. I used a window harness off of Amazon and just spliced in the 99-02 switches and it works good

[@Blazereviews95]

Got link to harness?

[@only1-godly651]

Link?

[@AlexLopez-kp1wf]

@@Blazereviews95 it’s called larlansz 6 pcs 12v universal car power window switch on amazon

[@guitarguy3221]

Thanks for this vid! Found out the whole body harness zip tied deeeeeep in the dash had to be swapped for an oem wiring swap. So this method is really the way to go for 99-02. Unless you buy the Amazon kit
I don't think you need a relay for this tbh. Just a fused run of 16 awg wire sent to each door's green wire. The chevy window switches have internal relays
For those struggling getting passenger side to work - Terminal G (driver side black ground wire) has to be grounded at as good a point with the fat passenger ground wire.

[@andrescelaya2100]

What is the Amazon kit?

[@preachboy9151]

@@andrescelaya2100lookup universal power window kit bro

[@SiempreTumbadoSprayedbyRo]

Appreciate you making this video 🙏 it helped me out. But was stuck at the end not having the passenger door switch work. You forgot to add the step where you run 12volt power to the green wire on the passenger door switch to power the window motor. Other then shit worked great

[@imagri1]

Thank you! This video got me to stop bangin the head off the pass window and make it work!

[@jorgedelgadillo28]

Hell yea finally a decent video on how to do this and what you need

[@sixtomaldonado2599]

I did the same but my driver side switch wont make passenger side window go up just down do you know how to fix?

[@guitarguy3221]

Terminal G (driver side black ground wire) has to be grounded at the same point with the fat passenger ground wire. I took 2 dewalt batteries and played around with a wiring diagram for 2 nights 😂
Edit: the Gnd on the dewalt battery only had to be the same for testing. Just make sure the Gnd is on solid bare metal when you install it 👍

[@rigohuertajr6097]

At 7:50 the yellow wire connecting to the green wire of the switch, where is the yellow wire coming from? Is it coming from the relay? Is it the one that had the black sleeve that was conected to the relay ?

[@AirplaneFreak]

Nice work man!

[@erikrojas4274]

I got it to work but I have a hum in my speakers now and engine noise what could be the issue?

[@alekctb]

Can I remove all the other wires out of the connectors other than the ones necessary?

[@ubhhbj4978]

Did your battery die when you leave them connected to the fuse box cuz mine does

[@miltonmiranda9900]

Bro, are only 4 pins of the 5 are used on the relay or 87 and 87a are use to power each door? Thank you

[@gerardolopez5875]

Then just by adding the relay, U bypass the connector at box? Or

[@josejasso8004]

What wires did you use for the unlock switch

[@lalowz]

Chingon el morro 🔥

[@austinnorris2383]

So if you get the proper year harness, would this be a plug and play job or do your still have to do some wiring? got a base wt extended cab with manual everything

[@stravis3269]

Hey bud I'm looking into this also. we have a few of these particularly years. And a odd ball with all Manuel. It's actually a cab and chassis 1 ton. No creature comforts.

[@omargarciasanchez3324]

do your speakers still work

[@PetrolBliss]

@1:07 real.

[@DeezNutZ-w7v]

My doors won’t unlock n lock anyone have a solution?

[@vrpv_zikess4247]

what he did was only for the windows, if u want your doors to lock and unlock you would have to install an after market kit

[@denraweb]

You can do it, just need the underdash harness. With the correct one, it'll all be plug and play and oem. No wiring needed. Just gotta look up the info for your year. Some trucks are prewired and make it plug n play from the jump. But do some research and you will find what you need.

[@Bueno-Fabrication-Tuning]

Yup, I got a donor Tahoe and I'm getting the pin out for the donor Tahoe as well as the original vehicle door switch pigtail... Just find where the wires go on the original harness and match it up

[@Logan-hk1sz]

I’m in the houston area,could I hire you to do this for me

[@djbiscuits1651]

I do this for a living

[@cristianSanchez-ln6pu]

@@djbiscuits1651 where you located?

[@gjolinares23]

@@djbiscuits1651 yeah what he said. What’s up?

[@djbiscuits1651]

@@gjolinares23 what year truck u got

[@djbiscuits1651]

@@gjolinares23 i can do from 99-11