I've got one 18.7 grams. Been wearing for a month and all the dings and scratches add so much more character. Doesn't shine like it used too, but love the rich yellow gold color.
@@dready8894 It is used, I've seen many 24K gold pieces. Just not as commonly used. The ring in my Avatar is 24K, thats why its bent and cracked. Cause it's very soft but they still use it.
24k gold is more valuable than the rest of gold. Even people say not popular, but when someone wants to buy it, 24k hold definitely is the highest choice than 18k gold. You can have jewelry from 24k, but it should be in high weight to cover up the softness of 24k
Only lost 2/10ths gram in the process and ends up with a beautiful band from common bullion. Well done my man. Makes me want to get an anvil and try this. 🤔
@@FriarPop troy oz friar don't forget old troy! on his scales it would of shown as 31.10g not 30.91, missing .19g! all precious metals are troy oz. don't be selling your gold a few grams cheaper!
Very nice! I’ve been refining gold an been thinking bout maken me and my wife a 24k we’d set but not sure how I’d do the diamond ring. U do anything like that?
@@commenttroll5561I have a 22k yellow gold wedding ring that has a simple design. It actually took a few hours for that to be made and as soon as it came out, it was hot to touch
Now that is a beautiful real/pure gold ring, its a shame that Australia has no value with or in gold... mainstream shops only sell hollow 9k gold jewlerry here and its overpriced for poor quality...
@Conan Houlroyd looked like a high karat solder, but not 24k. this ring could have just been fused together without the need to solder but the jeweler either didn't have that level of skill, or, more likely, there was no other size of torch available. The torch hes using is way to big for that method.
Because in India goldsmith use kdm for soldering gold . Sir please make a video of soldering gold without using kdm, can we join two gold without using kdm
@@yasirshah5485 For high karat gold like 24, I will hammer a small piece of 24k into a very thin pillion and insert into the joint. Using a hot, nearly oxidizing flame, the gold will fuse together, thus eliminating the need for solder.
The wedding band is supposed to be a loop without beginning or end, it's symbolic. With this welding technique, there is gap that is basically glued together. When I made my wife's ring, I cast it as a single solid piece, then filed and polished it into shape. Guess there's more than one way.
I'm not a gold smith, but if I were, I would have molds of different size wedding bands and melt the gold into them and start from there. This way seems like alot of unnecessary work. But, I'm not a gold smith.
Thank you GOD for you are the great way maker. All praise and honor to the Lord JESUS THE CHRIST! Who loves us and we are dear to him as he is dear to us. Our beloved GOD ALMIGHTY 🔥❤️🔥🕊
@@JaviGoesOutdoors well I emailed him quoted a piece and he said 425 for labour to make a Cuban chain if I supply the gold or pay for gold price and tax so aud its 2250 Oz usd that's 1750 and Cuban takes longer than that ring so half the labour 225usd +825usd for the gold and tax so my guess would be this ring all in 1350usd 14g wedding band made by this guy
I've got one 18.7 grams. Been wearing for a month and all the dings and scratches add so much more character. Doesn't shine like it used too, but love the rich yellow gold color.
Thanks for posting this video. It’s great to see how easy it is with minimal specialised tools. I’m going to make something like this myself.
In Europe, 24K gold jewelry is very rare and unpopular, which is a pity because pure gold is the most beautiful!
24k gold is to soft for jewelleries that's why is not so used.
@@dready8894 It is used, I've seen many 24K gold pieces. Just not as commonly used. The ring in my Avatar is 24K, thats why its bent and cracked. Cause it's very soft but they still use it.
24k gold is more valuable than the rest of gold. Even people say not popular, but when someone wants to buy it, 24k hold definitely is the highest choice than 18k gold. You can have jewelry from 24k, but it should be in high weight to cover up the softness of 24k
@@dready8894 -- 24 karat gold can be work hardened so it's not dead soft, but it's still not as durable as an alloy.
Il bimbo no
Very beautiful the hardwork of making gold ring is very hard
What solder was used?
Brilliant basic materials and great skill
Awesome work. Wow. Thanks for sharing. Greetings from Oceanside California 🤙
Superb bhai 🔥👍👍
Usually in Gulf countries you will get pure 22 carat gold rings, this man created pure gold ring of 24 carat. Claps 👏
Ganda naman
You make it look simple. Nice work.
Should have stamped it prior to rolling it. Nice work
Nice Job 👍
A work of art ❤
Only lost 2/10ths gram in the process and ends up with a beautiful band from common bullion. Well done my man. Makes me want to get an anvil and try this. 🤔
Love your videos 👌🏽
Awesome work! I have been looking at making myself something like this! & I Love the Ink work on your arm as well brother 🔥🔥🔥🔥🔥
Thanks very helpful...your jig is super kool.
Amazing very good, good lucky
Nice Job.
Very nice creation,. Gpod job,.
Great video.
I’d like to learn to work with gold someday
You are very honest person
did you use a small scrap that came from the gold to fuse the ring or is that a solder that you put on top to join it?
Great.👍❤️❤️❤️❤️
What did you use to solder the ring ? Just the same 24k bar using or some solder wire gold
Thanks
Just beautiful 🙏
Very nice
Beautiful ring
I would like to know what the steel molding plate is called at 2:35
That’s called a swage
Wow nice 🔥🔥 sir
How long tumbling 24ct gold?
Where did you get your die? Did you have to convert a die for the half dome?
Why haven't you replaced the batteries to your smoke alarm yet?
Dude chill he’s Mexican
Did I ask?
@@lebrongaay1199 shut up
Gorgeous work
Just curious: why do you keep torching the gold and immediately cooling it in water before working on it again?
@@obeasthead it's to release the tension built up by hammering the material
Good video, makes it look easy.
Salam satu hobi bossku...gotong royong merapat 👍
Gorgeous ❤
Stamp before hand, also to soft with pure gold
100 % Respekt !!!
I got a question Why didn't you use a rolling mill to stretch the gold and making it longer?
By not using one he is teaching people who can’t access such tools how to do it
What is the name of the tool at 2:45 ? Trying to start collecting basic tools
Beautiful
Цыганское золото
I have a 24k ring the color is insane 🔥
Sir nice work, can you please tell me the solder which you used to join the ring, what purity is it? And what is the composition of the solder
Você comprou essa barra onde
E qual e o preço dessa barra
very nice, how long did the whole process take? and where did the missing gram go lol
@@FriarPop troy oz friar don't forget old troy! on his scales it would of shown as 31.10g not 30.91, missing .19g! all precious metals are troy oz. don't be selling your gold a few grams cheaper!
Sir mai sone ka saman banane ka kam sikhna chahta hu But kai se sikhe
Aap bataye
Very nice! I’ve been refining gold an been thinking bout maken me and my wife a 24k we’d set but not sure how I’d do the diamond ring. U do anything like that?
24k is too soft to set a diamond unless you are bar or bezel setting it.......of the two, bezel setting is a better choice
Good job. We need your website
Whats the name of the tool you used around the 2:50 mark that you placed the good in.
Did you figure it out? I’m wondering too
@@patrickkorte1701 nope
It’s a swage
Very nice ring sir!
Where can I find the plate used to hammer out Shape of ring??
Etsy
@@Ian-goldwhat’s it csllled
Low tech job and gr8 result
Oky😘❤
Watched ko ito siss nakita ko lang ka takot naman ma tamaan daliri
Did you use an entire half oz of gold on one band
Would this be called 24k gold ring?
How long did this ring take to make? Did he make this in one day? Pretty amazing. Could this also be done with pure silver?
Thank you, yes we also do it on pure silver
@@Ian-gold What is the ring design called? I noticed that you used another tool to help shape it. Is there a name for this specific shape?
Thank you!
It can be made in 30mins to 1 hour
@@commenttroll5561I have a 22k yellow gold wedding ring that has a simple design. It actually took a few hours for that to be made and as soon as it came out, it was hot to touch
What is the tool you are use @2:49 to shape the ring?
Now that is a beautiful real/pure gold ring, its a shame that Australia has no value with or in gold... mainstream shops only sell hollow 9k gold jewlerry here and its overpriced for poor quality...
What is that steel ring mold called at @2:35
did you ever find out what its called, im looking for this as well cant find it.
Swage
I would like to enquire about your services. Do you have contact information for potential clients?
Me gustaría comprar una alianza como esa, por que en España solo las hay de 18k, donde puedo comprar amigo?
Mas terima pesanan apa nggak?
Is anguthi ka price kitna hai
so... does it give you the power to rule them all ?
Bro 6 gm hota hai kya anguti
Awesome
Why heat the good then cool it back down?
why no flux when soldering the gold together?
the purpose of flux is to prevent oxidation from interrupting the solder flow. Pure gold doesn't oxidize so it wasn't necessary.
I’m guessing he’s used 24k which can be done
Weight?
I see the gold bar beautiful more than the ring
So did you get the other half ounce as payment?
$1000 USD is overpayment for a simple band.
Why not cast the gold in the shape of a ring to start?
We can see the seam. Keep going
👍Eline sağlık
Sir did u use kdm for soldering
@Conan Houlroyd looked like a high karat solder, but not 24k. this ring could have just been fused together without the need to solder but the jeweler either didn't have that level of skill, or, more likely, there was no other size of torch available. The torch hes using is way to big for that method.
Sir??? Why every indian says that?
Because in India goldsmith use kdm for soldering gold . Sir please make a video of soldering gold without using kdm, can we join two gold without using kdm
@@yasirshah5485 For high karat gold like 24, I will hammer a small piece of 24k into a very thin pillion and insert into the joint. Using a hot, nearly oxidizing flame, the gold will fuse together, thus eliminating the need for solder.
How to order
The wedding band is supposed to be a loop without beginning or end, it's symbolic. With this welding technique, there is gap that is basically glued together. When I made my wife's ring, I cast it as a single solid piece, then filed and polished it into shape. Guess there's more than one way.
I'm not a gold smith, but if I were, I would have molds of different size wedding bands and melt the gold into them and start from there. This way seems like alot of unnecessary work. But, I'm not a gold smith.
Yeh neither of you are 😅
@@morgan17191/6/2025 - How many hours did it take you to make your wife’s ring?
Amazing ring...
Thanks
very smart!!!!
ret kya hai bhi is ka
How much for this ring
Sir 14grm ka asa ring challa 17 size ka magwana ho tu 24 crt ka
Please speak English he doesnt understand hindi
Ok
I want ? how much making charges
At 3 min when I realised he grew a third hand I understood everything.
Sir mujhe chahiye ye kitne rupaye ki he
100 ki h
Thank you GOD for you are the great way maker. All praise and honor to the Lord JESUS THE CHRIST! Who loves us and we are dear to him as he is dear to us. Our beloved GOD ALMIGHTY 🔥❤️🔥🕊
Price
Great video but that looks like my wedding ring when I got divorced 26 years later! LOL!
1/3/2025 - How many hours does it take to make a band like the one you made?
Daju yo ring ko price kati hola ?
Wow amazing may i know the width and thickness
🤭
♥️
I was real confused with the 3 hands 😅
🔥🔥🔥🔥🔥🔥😩😩😩😩😩😩
You can do many other ways that’s a harder way
Did you know that people already invented the laminator / mill???
How much? This ring
*A lot of money $$$$$*
gold around 700$ + crafting it, probably 1.5k-2k
@@JaviGoesOutdoors well I emailed him quoted a piece and he said 425 for labour to make a Cuban chain if I supply the gold or pay for gold price and tax so aud its 2250 Oz usd that's 1750 and Cuban takes longer than that ring so half the labour 225usd +825usd for the gold and tax so my guess would be this ring all in 1350usd 14g wedding band made by this guy
Супер! 👍👍👍