When you laser weld like that aren’t you only welding the surface of the ring and not through to the center? I imagine it would crack at the joint if enough pressure was applied to it.
It’s hard to see, but if you look close you’ll notice I start with the rose gold filler wire in the center of the ring below the surface and build my way up from there. That way it’s solid all the way through.
He did a walk through of his work flow in the past, that time lathe was the top end machine.. Nice to see he is advancing not only in skills but in terms of tools too..
@@crimsonhawk4912 smith little torch although I prefer the Gentec small torch- same thing just a smaller chance of getting a counterfeit version. There’s lots of smith little torch copies out there that are terrible, dangerous In fact.
Way more copper used than I originally thought to make rose gold...ring looks beautiful. Speaking of gold, will there be a release of the full making of the Gold Rush sub box?
Cosmic Rider well...not really. Like I said, he could have used 18K just as easily. That’s why people should go to small jewellers and not big name brands. Then you know exactly what your getting, what the cost is etc. With no middleman or excessive marketing.
This shows exactly why jewelry is so expensiven and the work behind making those beautiful gold pieces that will last a lifetime. I'm going to start investing in gold because the price is only going up and up💯
Mesmerising. I am watching this daily. Rose gold looks premium. I have saved this design. Want one in 22K yellow gold in same finish. What is the ring inner diameter ? And thickness of the ring ?
How do you get full penetration of the weld? No offense, but it looks like you just put a bunch of tack welds around the periphery and left the interior un-bonded.
Completely surprised that you shaped this instead of cast it. I know nothing of ring making, just what I expected to see when I started the video. Is there a reason to not just pour it into a mold?
After realizing how much 6.25g of gold costs...can you do a video on silver alloy making and or a video like this but for silver. I want to get into this...and if possible how to attach a crystal to it (round cut)🐠✨️💍🙏
Hey Patrick, do you still have this ring in particular? Because I wanna ask if it hasn’t corroded, caused by “galvanic corrosion”. This occurs when a base metal like copper is “connected” to a noble metal like gold and silver in presence of an electrolyte like water o sweat, specially in rings.
Just out of curiosity, but wouldn't it be easier to just melt down all the metals and then cast them in a ring shape, instead of rolling it out numerous times, and then having to solder.
Getting the mold of accurate size, and having to worry about the shrinking and cracks outweighs the ease of casting a block and making few of these..now he has a material enough to make few more if these in different sizes.. Custom rings are usually of unique size too
I have jewelry (some gold rings, chains and a few pendants) that I want melted together and made into a new ring, utilizing the numerous diamonds ... I don’t know even where to begin the process! Help!
Patrick Adair Designs I have experimented much with homemade alloys as you have (on my Chanel you will find such videos), but I have not experienced consistent results, nor consistent successes. Generally, alloy mixing is best left to the professionals. I buy 24K and premixed master alloys now.
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
The Rose Gold... that is the gold of Gods
Scáthach said that Cu Chulainn shined like rose gold🌹🪙
This was awesome to see the transformation of three materials into a ring! Plus it looks sweet
That is so cool I wish i had enough money for this but I sadly don’t
Same 😔
Solid rose gold ring is definitely my personal favourite. So clean, and stands out without looking outlandish
Still love my Meteorite ring from you!
this is so cool. I love working with rose gold, but I never have made it from scratch. Thank you for sharing your process with the world.
Bro which company alloy do you use can you tell me
@@saimuddin5401 I use stuller, hoover & strong, or Rio Grande
@@NoyesDesignsjewelry which one is best for pink gold cast
@@NoyesDesignsjewelry I am making 18k pink gold rings but it's colour is coming very light so that's why I asked you
I drooled when you were cutting up the gold bar. Who knew I'd react to 24k lie I react to chocolates 😂
Lol
Any man with sense would have known. You want one like that?
The making of rose gold ring is very nice clearly explained
When you laser weld like that aren’t you only welding the surface of the ring and not through to the center? I imagine it would crack at the joint if enough pressure was applied to it.
It’s hard to see, but if you look close you’ll notice I start with the rose gold filler wire in the center of the ring below the surface and build my way up from there. That way it’s solid all the way through.
Could you do a video all about your lazor welding machine? It looks really cool, would love to know more about how it works 😃
He did a walk through of his work flow in the past, that time lathe was the top end machine.. Nice to see he is advancing not only in skills but in terms of tools too..
Yeessss!!!! I’m making a ring rn ima watch it while making it
‘From scratch’? Well I’m still waiting for that mining footage
Jk nice ring👌
Lol you got me!
@@PatrickAdairDesigns
Hey what kit did you use for your jewlers touch. It looks like a small kit I can take any where!
"If you want to make an apple pie from scratch, you must first invent the universe" ~Carl Sagan (same goes for rose gold i guess)
@@crimsonhawk4912 smith little torch although I prefer the Gentec small torch- same thing just a smaller chance of getting a counterfeit version. There’s lots of smith little torch copies out there that are terrible, dangerous In fact.
Ooh this is so fun to watch
i love to see a green and or purple gold ring
My favorite kind of gold 😍
honestly the most insightful video for jewelry making i’ve seen from you
Way more copper used than I originally thought to make rose gold...ring looks beautiful. Speaking of gold, will there be a release of the full making of the Gold Rush sub box?
Keep in mind this was 10K, he could just as easily have used 18K which would have only been around 20-25% copper by mass.
Exactly ...just put a pretty name on copper and people will shell out.
should be out before the end of the week!
Cosmic Rider well...not really. Like I said, he could have used 18K just as easily. That’s why people should go to small jewellers and not big name brands. Then you know exactly what your getting, what the cost is etc. With no middleman or excessive marketing.
@@argentummoonjewellery3503 so is this ring worth the price or not?
This shows exactly why jewelry is so expensiven and the work behind making those beautiful gold pieces that will last a lifetime. I'm going to start investing in gold because the price is only going up and up💯
This is so amazing. One can tell you have a passion for what you do, Patrick. Thanks for sharing. :)
do you recall the specs on the exact size and shaping? I absolutely love the thickness and bevel. want this style for my wedding
So skilled and has soft touch!
Mesmerising. I am watching this daily. Rose gold looks premium. I have saved this design. Want one in 22K yellow gold in same finish. What is the ring inner diameter ? And thickness of the ring ?
How do you get full penetration of the weld? No offense, but it looks like you just put a bunch of tack welds around the periphery and left the interior un-bonded.
Completely surprised that you shaped this instead of cast it. I know nothing of ring making, just what I expected to see when I started the video. Is there a reason to not just pour it into a mold?
Love your videos and you got me into ring making so thank you
Hi,
Can the Orion Laser Welder be used on different carat Gold?
Can you weld 24ct Gold rings with this machine?
Patrick your work is inspiring, knowledge along with having the best equipment is the key. Thank you
Awesome video
It is so beautiful 😍
This guy is so cool.
Can you cut a circle into a graphite block and pour a ring, then hammer and polish it, or is it too hard to work on it when it’s round?
Fair play I don't think I could cut one of my pamp gold bars up .☹️👍 looks great.
After realizing how much 6.25g of gold costs...can you do a video on silver alloy making and or a video like this but for silver. I want to get into this...and if possible how to attach a crystal to it (round cut)🐠✨️💍🙏
Hey brother... The ring on your left finger... Is it white Gold or Palladium or Platinum ?
Stunning looking and beautifully made. I'm purchasing one today.
Beautiful ring as always
Thank you for the info very educational
Slick build brotha!
Thanks!!
Instead of silver,, could it replaced with palladium ?
So beautiful!
Price of the ring ?
Artismas on Etsy has the most 🔥 snapbacks
Why not pour it into a ring shape mold from the get go?
Hey Patrick, do you still have this ring in particular? Because I wanna ask if it hasn’t corroded, caused by “galvanic corrosion”.
This occurs when a base metal like copper is “connected” to a noble metal like gold and silver in presence of an electrolyte like water o sweat, specially in rings.
Where did you find that scrap gold..?! I need some...
This was awesome.
very cool love that wielder
You did it good.
Do you think you should’ve annealed it more during the rolling process? I noticed it cracked a bit.
Hi, why is silver needee at all?
Why you use dragon gold bar with high premium. You could use cast bar
Dear Patrick Adair.
I challenge you to making a ring with a nail file. Whether it’s the metal ones or foam
Thank you.
Wow amazing Man 👨 ✌️✌️✌️
Love your vids keep it up
Everybody gangster until he throws it in a fire and it glows in the ancient language of Mordor.
*_Thanks for sharing_* 😊✨
So nice.
What will be the percentage of mixing gold, silver, and coper in 1gm??
That was awesome 👏 thank you for sharing
Do you use flex when you melt the copper, silver and gold?
is it possible to make rose "gold" from possibly cheaper stuff like steel? as a coating?
Awesome video. Seeing your fingers that close to the lathe chuck made me 😳 tho lol
Beautiful work! I would like to know if you could make a ring like this for sale a pair of them, and how mutch you want for it?
Dude that was a great video awesome next time make an 18 carat either way awesome video I will be subscribing
Please make Masrani’s Amber Ring from the movie Jurassic World.
beautiful
Looks like it’s got a harsh flat spot from sanding down the weld, but color looks really good
Damn, these are some nice looking rings. If I wasn't a poor bastard I would definitely get one.
I really should get a metal lathe, and good ones that are a good price?
I need this ring...👌🏻👌🏻👍🏻👍🏻
I AM FROM INDIA C.G. DIST..JANJGIR..👌
Superb...
Dude really laser sawing without gloves, he got ballz
Lol
I'm interested to do it
What if I wanted a lower dome? would i just file it? and if so, how do i do so evenly?
Thanks!
@Patrick please what’s the name of the machine you used for the sanding in and out? And what’s the cost of it please?
So how would you make 24k rose gold? Is that possible?
Sonic wants to know your location
But In all seriousness this was dope and satisfying to watch
Just out of curiosity, but wouldn't it be easier to just melt down all the metals and then cast them in a ring shape, instead of rolling it out numerous times, and then having to solder.
Yeah but that isn't as fun
Getting the mold of accurate size, and having to worry about the shrinking and cracks outweighs the ease of casting a block and making few of these..now he has a material enough to make few more if these in different sizes.. Custom rings are usually of unique size too
Mvadu is exactly right
Dose the ring tarnish cause of the copper?
How long does all this take roughly
Awesome
Hmmm, I hope this means gold rings orders will start getting filled!
I tried this method and it turned out yellow.
What did i do wrong?
Studio / shop tour video?
I have jewelry (some gold rings, chains and a few pendants) that I want melted together and made into a new ring, utilizing the numerous diamonds ... I don’t know even where to begin the process! Help!
Can you please tell what is the substance in that mirror polish bottle
How much would it cost for you to make another pew die pie ring and sell it
This little boy sure likes to show off his toys
What’s the piece called that allows you to work on the inside of the ring for the lathe?
Wich laser you use to solder?
I have a rose gold weeding band. Is this how major Jewelers make rose gold?
Most jewelers buy premixed gold alloys from large distributors who use a similar process I used but on a much larger scale.
Patrick Adair Designs I have experimented much with homemade alloys as you have (on my Chanel you will find such videos), but I have not experienced consistent results, nor consistent successes. Generally, alloy mixing is best left to the professionals. I buy 24K and premixed master alloys now.
Wath can you do to stop copper to oxedise? I realy want to make a copper ring at home.
Why did you use copper wire instead of a copper plate or block? Surely that would of been cheaper per unit of weight.
Is that 4mm or 5mm width?
Please command rose ring price/cost.
Gold ring of lord
So cool to see the actual "how to" for your process. Stop making it look so easy, cause I know it's not, haha!
What percentage of copper do you use while alloying?
Does it fade?