Longest Video to Date! Please check the Video Description for Chapters if you care to Bounce Around and Pick and Choose what you care to Watch! This was a blast to build and record! 💰12 GPU Mining Rig Profitability: Ethereum Mining Hashrate = 350 Mh/s Power Consumption of Mining Rig = 1580 Watts Electricity Cost = $0.057 kWh Daily Profitability for Rig: $24.24
I have a great tip for getting that cover off of double-sided tape. Don't cut it all the way with your knife. Cut most of it with the knife but leave a small bit connected that you then tear apart with your hands (3 - 5 mm). This will stretch the plastic film a little on the corner as you pull it apart and make it much easier to peel off the tape. Enjoy!
I always like watching long videos. Able to take notes, play it back and enjoy it some more!!! I never get tired of watching rig builds. It’s truly become a passion for me, plus I’m getting educated as well is the most important part.
On the double sided tape. I find it easier to get the peal off if I rub my thumb over it back and forth a few times to make the first side stick before peeling it off. Works way better.
Cool can wait to build my new frame in the couple weeks coming up. I'm super excited. Going to get 6 GPUs and start mining. Been doing it for a week on my gaming PC, and the addiction kicked in. But I'll definitely be lost while building my first mining rig.
On the magnetic stuff.. That was mainly for old Platter drive HDDs as well as even older Floppy drive disks. lol you could wreck some floppies back in the day with a magnet. Modern systems really dont care at all about magnets any more.
Your setup on the that rig is literally identical to my rig right down to the server PSU...Iove the 12 GPU frame.. I might add an extra modular PSU on it and move the server psu to the back and use it only for a couple cards cuz that server PSU gets loud when you get close to capacity
You don't need to move the support back for long cards....the pcie slot is in the same place on all cards regardless of length ....but I see what you are saying
lol at 11 some odd min... Power supplies.. Generally at least, use the fan as an INTAKE not exhaust. You were concerned about the PSU blowing across the MoBo, but unless its some whacky ass PSU should actually Suck air in from the fan side, and exhaust it out the back or the plug side of the PSU. So really, it would actually probably be better to go ahead and have it with the fan facing the Mobo to suck off any heat and exhaust it out the front (from the -perspective we were at) as a way to keep air moving... Not trying to be a jerk, just saying in case there are others that don't know that in general PSU fans are intake, and it pulls air into the PSU and out the mesh power plug side, of course this is a generalization for ATX power supplies, but I've never seen one that wasn't like that. Cool video tho thanks for taking the time.. I'm so jelous of the white GPU you got, i've been wanting a nice white GPU to go in my normal everyday use rig for a while now, but good luck actually picking what GPU you want unless $$ is no object.
What gpus did you use in this build? I would love to eventually build this rig! I love the way you detail everything but it would be awesome if you could in the comment or something tell use what gpus you used. I know you say it multiple times but it’s hard for me to keep up plus I zone out watching the builds as I am learning better techniques to build my rigs and miss those details sometimes. Awesome video and with your content you gained another subscriber
Hello my friend please help me RTX 3070 TI and power supply 700w When I start mining the machine restarts.....when I replace it with a gtx1660s card Mining continues without any problem.... knowing that the device contains 16 GB and Card ssd250 GB and Windows 10. thank you my friend
@@BLCvlogs Got 11 gpu's started earlier in the year. Good to keep faith but eth is soo huge idk if mining will recover after the merge. I got all my cards for a steal anyway and for much lower than their current market value so im fine either way
Longest Video to Date! Please check the Video Description for Chapters if you care to Bounce Around and Pick and Choose what you care to Watch! This was a blast to build and record!
💰12 GPU Mining Rig Profitability:
Ethereum Mining Hashrate = 350 Mh/s
Power Consumption of Mining Rig = 1580 Watts
Electricity Cost = $0.057 kWh
Daily Profitability for Rig: $24.24
The gopro quality is insane. And you can work freely with both hands. Win win situation 👍🏼💪
Yeah. The Audio Quality I need to find a better solution to. But being able to work with two hands is amazing!
I have a great tip for getting that cover off of double-sided tape. Don't cut it all the way with your knife. Cut most of it with the knife but leave a small bit connected that you then tear apart with your hands (3 - 5 mm). This will stretch the plastic film a little on the corner as you pull it apart and make it much easier to peel off the tape. Enjoy!
Video is great but where do we find the cards?
In the video, you said something about sending off one of your GPUs to get repaired. I'm curious to know, where did you send it to get repaired?
I always like watching long videos. Able to take notes, play it back and enjoy it some more!!! I never get tired of watching rig builds. It’s truly become a passion for me, plus I’m getting educated as well is the most important part.
Glad you enjoy it!
On the double sided tape. I find it easier to get the peal off if I rub my thumb over it back and forth a few times to make the first side stick before peeling it off. Works way better.
"ahhh cable management"
So satisfying lol
Cool can wait to build my new frame in the couple weeks coming up. I'm super excited. Going to get 6 GPUs and start mining. Been doing it for a week on my gaming PC, and the addiction kicked in. But I'll definitely be lost while building my first mining rig.
Hey man how'd it go?
On the magnetic stuff.. That was mainly for old Platter drive HDDs as well as even older Floppy drive disks. lol you could wreck some floppies back in the day with a magnet. Modern systems really dont care at all about magnets any more.
I like hanging out, thanks for sharing man :) now off to work
Your setup on the that rig is literally identical to my rig right down to the server PSU...Iove the 12 GPU frame.. I might add an extra modular PSU on it and move the server psu to the back and use it only for a couple cards cuz that server PSU gets loud when you get close to capacity
You don't need to move the support back for long cards....the pcie slot is in the same place on all cards regardless of length ....but I see what you are saying
I enjoy your assembly videos, because I can see all the shit I do wrong.
Thanks for watching the video😊,don't forget to hit the notification bell🔔🖕for more info hit my inbox📥
±➀➄➀⓪➈➃➇⓪➄➂➁
................
This was awesome.
For the double sided tape. Don't put the knife away, use it to pick the corner of the peal up!
The Power Supplies are supposed to Suck In from the big fan and blow out the back where the power switch is. Am I right???
That is pretty.... now add those RGB fans to it!
I do have some rear fans to add, in a future video.
lol at 11 some odd min... Power supplies.. Generally at least, use the fan as an INTAKE not exhaust. You were concerned about the PSU blowing across the MoBo, but unless its some whacky ass PSU should actually Suck air in from the fan side, and exhaust it out the back or the plug side of the PSU. So really, it would actually probably be better to go ahead and have it with the fan facing the Mobo to suck off any heat and exhaust it out the front (from the -perspective we were at) as a way to keep air moving... Not trying to be a jerk, just saying in case there are others that don't know that in general PSU fans are intake, and it pulls air into the PSU and out the mesh power plug side, of course this is a generalization for ATX power supplies, but I've never seen one that wasn't like that. Cool video tho thanks for taking the time.. I'm so jelous of the white GPU you got, i've been wanting a nice white GPU to go in my normal everyday use rig for a while now, but good luck actually picking what GPU you want unless $$ is no object.
What gpus did you use in this build? I would love to eventually build this rig! I love the way you detail everything but it would be awesome if you could in the comment or something tell use what gpus you used. I know you say it multiple times but it’s hard for me to keep up plus I zone out watching the builds as I am learning better techniques to build my rigs and miss those details sometimes. Awesome video and with your content you gained another subscriber
1060 6gb, 1080s, 1660 tis
AWESOME BUILD! I HAVE 3 OF THOSE RIGS, [ THE CHINESE VERSION , WHICH IS IDENTICAL ], THEY LOOK SEXY AF! AND VERY COMPACT BECAUSE I LIVE IN A CONDO.
how much would you say you have invested in mining?
Looking good is half the battle tho...If you do it might as well look cool too lol!
That is true!
Hi I've been getting some 3080s and 3070s for a mining rig any suggestions on a motherboard?
hey do you need a pdu for the server power supply, or can you connect the same cable of the atx power supply ???
hey man hook it up with the old risers!!!!!1
The GoPro on you is making me dizzy. Tripod would be better. But the build is great.
Hello my friend please help me RTX 3070 TI and power supply 700w When I start mining the machine restarts.....when I replace it with a gtx1660s card Mining continues without any problem.... knowing that the device contains 16 GB and Card ssd250 GB and Windows 10. thank you my friend
Thank you sir
"we don't use it because it looks good, we use it because it works" Very true LOL
How is your electricity only $0.057 kWh??
Check yesterday video out:
ruclips.net/video/n7itcw7cvEk/видео.html
What is the cpu and how much w using
I have that mining frame and the problem is the heat cause they cards are too close to each other.
So far so good for me. Warmest card is my PNY 1080 on the top, third one in.
Right. He's taking cards that had great airflow and cramming them into a tight little rig for the sake of a video.
I used 2 molexs for my mobo. I did not even try to see if the one cable was spaced out to the correct distance.
Would have been funny if you did not wear shoes
I was thinking, have I been screwing my cards in wrong. Then you changed it LOL
I would have put the double fans on the bottom and single fans on top
"I think we're ready to power this on" then I thought I hope all the new untested risers work and the thing posts
Why Phoenix and not team red?
What company repair your card ? So hard to find a GPU repair shop .
They are not public. Sorry.
Wrap with electrical tape, "smart move for sure" proceeds without electrical tape lol 🙈🤣
I never had issues :P
@@TheHobbyistMiner Just love it thats all keep them videos rolling!
Ho THM. Do you need 8go ram for 12 GPUs ?
Nope. 4gb is just fine
@@TheHobbyistMiner Thx. Great !
i love mining
You and me both!
U will love it til eth 2.0 arrives lol
@@joestuehmer7967 you new!?
NA! That will be the Age of Alt Coins, I can't wait!
@@BLCvlogs Got 11 gpu's started earlier in the year. Good to keep faith but eth is soo huge idk if mining will recover after the merge. I got all my cards for a steal anyway and for much lower than their current market value so im fine either way
Better go for cards to mine ETH or ERGO/Flux/Firo? when eth2.0 becomes active next year.
Thanks for watching the video😊,don't forget to hit the notification bell🔔🖕for more info hit my inbox📥
±➀➄➀⓪➈➃➇⓪➄➂➁
................
Clear coat the floor to preserve the kids drawing please
Running gigabyte 1060(hynix memory) and asus strix 1060(samsung memory)
How’s the hash on both? I run EVGA micron and Hynix
@@Ash-my4gf gigabyte 1060 gets 18.7Mh/s and asus gets 24.5Mh/s
It's takes more than a an hour to to add an extra card and sort out the issues to make the rig reliable :/
Not needle-nose pliers!!! Use the correct sized nut driver.....
First
1/2
Anyone know of a good cheap mining frame from Amazon?
Take a look at this video. Should help out. ruclips.net/video/M0K9kFR4IW0/видео.html
I'm fast 🤣😎😂
The Fastest!
I started looking into mining thinking I could make big money in my living room..but $25 a day…😢
It’s very good.
thats 9k a year !!!!!! wow!
There's no Z in Asus. Why do you say it like a south african ? Asus rhymes with sluice, there is no Z sound.
Trying to teach me shit again.... HOW DARE YOU!
haha! I learn as I go :) We can learn together!