I want to schedule the dimmer including the percentage of light intensity, but there is only an on/off option. I think it would be better to have the possibility of also scheduling the percentage I want, something like, turning the light on at 8am at 37% intensity. Another idea is to include a lighting ramp, where it would be possible to configure something like, the lamp increases the percentage from 0% to 100% from 8am to 9am I saw settings like this in the app for my Elgin smart lamp, I thought it was really cool While this option is not included in the app, do you have any temporary solution that I can use to be able to do something like this?
I live in the UK, so how do I DIMM my 220v ac table lamp as I see this only works with low voltage, and what do I do with the esp8266, and how do I power it with 5 volts? I am using TUYA lamps that run on 220 volts AC at the moment and Zigbee to control them all, and my door sensors are battery operated, so to change to your system would be very hard, so perhaps you can explain in a video how to change.
In this case, you will need a license for each unit. If you are dealing with a large number of devices, You can use the esp32, or use an external MCU with CadioSerial library, and you will be able to add up to 21 devices per each esp
Great app! I will try every feature it has. But I wonder what is the frequency of the pwm signal? I hope it is more than 10 kHz. I don’t want it to flicker on camera.
@@cadioHomeAutomation the internet says it goes up to 40 mhz but I don’t know much about it. I will try though. One more question. Can I use push buttons to switch modes between on/off instead of a switch? I really want to be able to do that. I might even be a dealbreaker for me.
Just one question, the light widget changes colour when turning on or off but there is no text to show Light ON , Light Off or am I missing something? It is better to see text showing On/Off rather than just colour change which is sometimes confusing.
@@cadioHomeAutomation oh ok u said we can link unlimited no of units to a single account,i thought this is a feature for premium users ,but still is thier any lifetime plan in which we can use multiple or unlimited units
Great app works well with my 5 channel esp32 home automation board, it would be great if can include a IR Remote so can still control if no wifi similar to one made made by TechStudyCell
Very good work.I think cadio is the esaiest platform I used ever. if I want to connect Atmega 328 in serial with Esp32 now I want to connect a dimmer to Atmega 328 can you please send me the arduino code to do that.
Salam dear admin, Please add ultrsonic sensor (HC-SR 04), so that we can use it. I've shifted my old Blynk projects to this new platform, I really enjoyed it. JazakAllah.
1st comment,
Best automation app in recent times
I loved it😍
Can please make A video about AC fan speed control with app and manual control 😊
ruclips.net/video/HcYCt668MMo/видео.html
ruclips.net/video/Iu7mfa-bFJM/видео.htmlsi=kZxwDqK5f_9YKyGU
But is there a way to demer for 220 volt devices
How does the AC light work?
I want to schedule the dimmer including the percentage of light intensity, but there is only an on/off option. I think it would be better to have the possibility of also scheduling the percentage I want, something like, turning the light on at 8am at 37% intensity. Another idea is to include a lighting ramp, where it would be possible to configure something like, the lamp increases the percentage from 0% to 100% from 8am to 9am I saw settings like this in the app for my Elgin smart lamp, I thought it was really cool
While this option is not included in the app, do you have any temporary solution that I can use to be able to do something like this?
I live in the UK, so how do I DIMM my 220v ac table lamp as I see this only works with low voltage, and what do I do with the esp8266, and how do I power it with 5 volts? I am using TUYA lamps that run on 220 volts AC at the moment and Zigbee to control them all, and my door sensors are battery operated, so to change to your system would be very hard, so perhaps you can explain in a video how to change.
sir once you get permanent license you can use many nodamsu
No, the permanent license is per unit.
@CADIO Home Automation but sir I am use 3 nodemcu sir your launch app to buy license to use more mcu as possible as
In this case, you will need a license for each unit.
If you are dealing with a large number of devices, You can use the esp32, or use an external MCU with CadioSerial library, and you will be able to add up to 21 devices per each esp
@CADIO Home Automation thanks but extra mcu can oprat manual swich sensors possible 21 appliance
Will the be a point where you integrate this app with Samsung smarthings , similar to what sinric pro does?
We are planning to do it soon!
Great app! I will try every feature it has. But I wonder what is the frequency of the pwm signal? I hope it is more than 10 kHz. I don’t want it to flicker on camera.
I think the esp pwm is 1khz
@@cadioHomeAutomation the internet says it goes up to 40 mhz but I don’t know much about it. I will try though. One more question. Can I use push buttons to switch modes between on/off instead of a switch? I really want to be able to do that. I might even be a dealbreaker for me.
@@kerimturan1757 yes, just set the "switches mode" to "press".
egycad.com/cadio/docs/info-file/general-settings/#switches-mode
Sir maximum kitne appliance control kr sakte hai esp32 with extra mcu and manual swichea
21 devices
Just one question, the light widget changes colour when turning on or off but there is no text to show Light ON , Light Off or am I missing something? It is better to see text showing On/Off rather than just colour change which is sometimes confusing.
Thank you, this will be token into consideration during the discussion of future developments.
Having permanent licence means I can add as many esp board i want on single email id ?
Or do I need to get licence for every new esp board ?
Every esp should have it's own license ( the license is per unit "esp")
@@cadioHomeAutomation but in ai home automation video you said yo can have unlimited units if m not weong
Of course I didn't! Kindly check the video (at 09:00)
ruclips.net/video/h4RS7SxAisI/видео.html
@@cadioHomeAutomation oh ok u said we can link unlimited no of units to a single account,i thought this is a feature for premium users ,but still is thier any lifetime plan in which we can use multiple or unlimited units
Great app works well with my 5 channel esp32 home automation board, it would be great if can include a IR Remote so can still control if no wifi similar to one made made by TechStudyCell
You can use remote controller! I will make a video about it very soon!
@@cadioHomeAutomation Thank you much appreciated
Very good work.I think cadio is the esaiest platform I used ever. if I want to connect Atmega 328 in serial with Esp32
now I want to connect a dimmer to Atmega 328
can you please send me the arduino code to do that.
I want esp32 to communicate with ardrino. I have heard "cadio serial library" somewhere.
Can you make video on this
Sir one nodemcu 32 to controal 21 drivece with manual switches and sensors possible
Yes, using CadioSerial library
@@cadioHomeAutomation 1 vedio please
Best app and easy to use, How to use AC Dimmer with PWM output and Zero volt cross as interupt?
In this case, you need an external MCU with CadioSerial library:
egycad.com/cadio/docs/CadioSerial-library/
@@cadioHomeAutomation There is nothing details about AC dimmer on that portal document, only DC Dimmer is there.
EEPROM IS INTEGRATED OR NOT ?
Make a vedios on cct type led
Hey how much voltage did you use for the led light?
12v
Salam dear admin, Please add ultrsonic sensor (HC-SR 04), so that we can use it. I've shifted my old Blynk projects to this new platform, I really enjoyed it. JazakAllah.
Do you have an alternative to cadio?
I want an alternative, cadio doesn't give lot of customization 🙄
@@kakashiB2k Yes i'm using Blynk sice last 5 years, but you have to know about C++ for coding a project.
i used another phone with same email id of my phone Cadio account... But now in my phone i can't control the light
Sorry can't understand! What does "id kn" means?
@@cadioHomeAutomation.
where can i get source code of esp32 dude?
Unfortunately not available
Hi Team
Plz make a video celing fan speed control(ac)
Thank You
ruclips.net/video/HcYCt668MMo/видео.html
Sir esp32 connect Bluetooth
Unfortunately not supported yet
Ac support
Control Google Assistant light dimmer 0 to 100%
Can please make A video about AC fan speed control with app and manual control 😊
ruclips.net/video/HcYCt668MMo/видео.html