Hi! Thank you so much for your detailed instructions of controlling my esp32 by alexa thru cadio apps. I am sure i will enroll to your tutorial course soon.
Thank you for sharing such a beautiful video. Please guide me because my one switch is working but other is not. I checked the wiring and configs but no luck. Same switch works in case wiring is switched between both switches.
Wow! This is a wonderful Project. I just did the project and everything is working fine. Thanks for the good work. But, Please Mr. Tech Study, How can I re-enter the configuration mode, to add some sensors and also change "Press" to "Normal" for the use of Latch Switches?
Hello Tech StudyCell, I really like this CADIO app. I also tested this program on 4 bulbs and it works perfectly. What is the price of CADIO application full. And is it a one-time payment or monthly payments. Thanks for the information.
Sir I have a question why we use only 5V relay and not 12V or 24V relay. sir why we don't use relay with optocoupler. Sir I want to automate my bathroom geyser since it is high power.
Hello sir I followed all your steps correctly but after configuration the relay is dimmed on but when I press the switch it glows more and does not get controlled through cadio app. Please help what is the issue
Hello, i tried to use nodemcu CH340 but the switch 1 connected to pin SD3 is not working. Could you help for the solution or alternate pin for switch 1?. Thx
Hi, good afternoon, I've been watching the videos and they seem excellent, I congratulate you, I just have a question, in a previous video I saw how you made a temperature-dependent irrigation system with an ESP32, I would like to know how you can do the same project but now implementing the time; I mean that the same ESP32 can water plants both due to humidity and at a certain time
Adab bro i am from bangladesh i bought an esp32 but how can i set the program i don't have any laptop or computer i only have android mobile please help me bro
@TechStudyCell Aggeed nice video! A couple of us have had an issure with the relay staying on, amy ideas? They come on right away and stay on regardless on relay high or low, or turning off / on.
Hello friend.please make alexa or google assistant conroll home automation using ESP 01 module and please program the ESP 01 module with computer step by step. step.thank you very much.
Hi! Thank you so much for your detailed instructions of controlling my esp32 by alexa thru cadio apps. I am sure i will enroll to your tutorial course soon.
I really like this project, it's easier and more complete, thank you sir for sharing your knowledge
You are welcome
Can you guide use IR control 4 relay with cadio ?
@techstudycell Nice and very easy project for beginners like me...
Can you please make same project using ESP32 for 4-6 switch, 1 fan with RF receiver
😊
You are a genius 👍
5 volt and 2 ampere power supply?
Sir can you please do using only mobile including coding also in mobile because i don't have any laptop so pls help me sir
Thank you for sharing such a beautiful video. Please guide me because my one switch is working but other is not. I checked the wiring and configs but no luck. Same switch works in case wiring is switched between both switches.
Wow! This is a wonderful Project. I just did the project and everything is working fine. Thanks for the good work.
But, Please Mr. Tech Study, How can I re-enter the configuration mode, to add some sensors and also change "Press" to "Normal" for the use of Latch Switches?
You have to upload the firmware again.
is there a way to turn on all relays at once with 1 command??
Hi, will this project work with the esp8266-01 module?
Sir, 1 question.
Which use jumper wire typ?? (Male to female ya male tomale) answer
I have esp8266 v3. Push 1 with gpio 10 (S3) is not working with push btn. I tried 5-6 times.
What if internet connectivity failure, How can i switch to normal switch
Nice project cadio paide app hi charg
Brother Plz door lock sistam keypad ya fingarprint lock video and cod
How to use ESP01 in place of ESP8266?
its a great site to exeperiment tq for shring all the knowledge about home automation can u share the pcb
Hello Tech StudyCell, I really like this CADIO app. I also tested this program on 4 bulbs and it works perfectly. What is the price of CADIO application full. And is it a one-time payment or monthly payments. Thanks for the information.
Bro ma switch ke jagha ttp 223 capactive touch sensor use kar raha hu to kya edit karu
Can i use ttp223 touch sensor in this automation???
can i add touch sensor switch
Sir how to 8 chanel relay connecting esp 8266 use with cadio
Hey Brother, Were you able to figure it out, if so please kindly share the information or where i can get assistance?
why relays are always on even though i off them
I have the same issure, did you find a fix?
Sir I have a question why we use only 5V relay and not 12V or 24V relay. sir why we don't use relay with optocoupler. Sir I want to automate my bathroom geyser since it is high power.
Hello sir
I followed all your steps correctly but after configuration the relay is dimmed on but when I press the switch it glows more and does not get controlled through cadio app. Please help what is the issue
Yes i have also that problem
Jab me switch connect nahi kar raha only relay operate karta hu to hoti hai jaise hi switch connect ki all will be off slightly
Hi, small request can you please share the diagram printout layout to make using acrylic sheet.
Sir Plz Give the link of BOM file and CPL file which you used in this projects
Hello can you make ir control with 2 fan and 4 lights
This feature already available in Cadio app. I already used 1 light using IR.
hi, after configuration device is not showing in cadioapp can u plz tell me why its not showing to me and sometimes com port also not showing for me
Can we combine this Project and ur universal remote problem... Please reply is yes what pins should I change
your code is useless..it is not working.code send error in ardiuno while uplode
Hello, i tried to use nodemcu CH340 but the switch 1 connected to pin SD3 is not working. Could you help for the solution or alternate pin for switch 1?. Thx
On my Board esp8266 Lolin
S3 = gpio9
SK = gpio10
Saya Pakai SK = gpio10 working fine 😅
@@veriyanirvansyah7503 Please let us know all the pin changed in V2 and V3
What it means showing "trial"? Do we need to pay after trial period?
Cadio wifi not showing. Help pls
Hi, I'm really looking for same, can I have a same circuit with touch sensor ttp223
How do you know GPIO address for Configuration is D8 - 15 ? Can you also let me know GPIO address for configuration for ESP-01 ?
Is the manual switch two way switch(spdt) or one way (spst)
Where your cable is connected to ??
Can we give 5v from usb pin
@Tech StudyCell: So can I use CADIO app for free lifetime?
You get nothing for free my friend
3:11 how to turn off booting process?
Sir,
Problem is in code sinric pro.h error.Please tell me
I copied you code after some changes.
If i perform the project without switches what will happen , with is the charges that I have to do?
Just don't map the gpio for switch
Hi, good afternoon, I've been watching the videos and they seem excellent, I congratulate you, I just have a question, in a previous video I saw how you made a temperature-dependent irrigation system with an ESP32, I would like to know how you can do the same project but now implementing the time; I mean that the same ESP32 can water plants both due to humidity and at a certain time
Adab bro i am from bangladesh i bought an esp32 but how can i set the program i don't have any laptop or computer i only have android mobile please help me bro
Sir, good project👍, what make difference if you use either ESP32 or ESP8266? please! I am not challenge you but I need to understand
You just have to upload ESP32 firmware for ESP32
not connect before wi-fe
Dear sir please provide esp01 Cadio firmware.. It's note available on cadio site
hlo sir, can we control the fan speed using cadio application, if possible can u make an video of it, it will helpful to people, thank you.
Sir isme or ak future rgb light ka add kardo ❤
Can we integrate with home assistant
@techstudycell can you pls send us the code that you used
How to add IR
dose it need to reprogram it every 21 days?
can u do it with 10 relays
Please provide zero pcb circuit diagram of it.
can i use more than 4 switch? if answer is yes then how
Hi, Can you provide me the BOM and CPL files for this project to upload in jlcpcb
Sir nodemcu wifi reset kese kare
Google assistant not working
I am unable to upload the firm file into the ESP8266 microcontroller please help
This is what I had to do
1. Check device manager an ensure usb driver is installed
2. Verify the COM port by unpluging and seeing witch on disapears
@Tech StudyCell Which is better CADIO or Blynk0.2
Both are good. If you want to play with codes, go for Blynk or If you need features like Google assistant then use Cadio.
Sir nice project but opisite worked when press on ,off relay and when press off, on relay how solve?
If you are using active high relay, select relay mode Active High while configuring the ESP8266
hi can i use this esp 8266 for 8 relay?
Nice but a repeat of the last video, why not do a security system using Cadio more useful
like licensing, per device? Or a one time purchase?
One time purchase per microcontroller. Please visit their website
@@TechStudyCell new microcontroller, new license? I did not find on the site, mention of the license.
can you please provide code file in your description
nice
Thanks
@TechStudyCell Aggeed nice video! A couple of us have had an issure with the relay staying on, amy ideas? They come on right away and stay on regardless on relay high or low, or turning off / on.
Which is better CADIO or Blynk0.2
Both depend on applications
Can we operate without internet ?
Yes, with Manual latch switch or push button switch we can operate without internet
Hi.plaes can you giv me code by uplode for esp8266
Cod ki kore input korbo phone dia
Sir ji, can I use it in this project instead of Wi-Fi router by connecting internet through mobile hotspot? 😢 Please reply sir.
yes you can use mobile hotspot instead of router
Esp program file need
does this cadio application we don't need to do coding in the arduino ide application?
No Coding required
Hi
Can you make a water leak detector wireless iot based
With esp8266
Dear where are you ?
Sir the NODEMCU didn't connect with cadio why
pls follow the steps correctly
How to make staircase light in esp32
ruclips.net/video/ppZXhugA63o/видео.html
ruclips.net/video/3syiig01jf0/видео.html
where is the bcom file
How many area range control by automation
♾️ infinite
Sir, i program how fo phone
How can I do it by phone?
Does this project need wifi router
Yes😊
Hi, Sir can you provide me BOM and CPL file with Gerber file.
Cadio firmware is free for life time or any limit
Nothing is free for lifetime.. pls video their website
All cost
How to re-configuration please reply..
reinstall the firmware and configure again
@@TechStudyCell thanks bro...
I want to buy it
On my Board esp8266 Lolin
S3 = gpio9
SK = gpio10 😢😢😢
Hello friend.please make alexa or google assistant conroll home automation using ESP 01 module and please program the ESP 01 module with computer step by step. step.thank you very much.
OK
Is it possible to add fan dimmer?
No
@@TechStudyCell Why bro?
@@hasstv9393 ask Cadio the developers
Can i install it on esp01
Yes
Bro where is BOM file
You didn't provide code buddy
No Coding required. Please watch the complete video.
Can i flash ESP 01 with CADIO?
Yes
@@TechStudyCell but now at the CADIO download link 2mb file is missing only 4mb file available there
@@TechStudyCellsir, where can i get cadio 2mb flash file?
This app is not free only 500 hours the draw back
I have used free plan... reupload the firware after 500hr
Sir how to 8 chanel relay connecting esp 32 use with cadio
Are you use in code or not
Not
my cost lost😢1000
Ambala may kaha rehte hai aP
May Kaithal say hu
Aap say milna chahta hu
Par ye permanent. App naho he
Sinric pro. 3device control absolutely free for 10years