@@Rizwansideas I recently setup my computer with 'hyperion ambilight ' and searching videos for home automation. RUclips recommendation delivered yours to me. I dunno hindi but this is a great video.
Amazing idea sir. Is ideas se hum apne abhi chal rahe corona time me boht Fetfully ho sakta he q sab chiz ko toch karne se door hoke hum apne mobile se on ya off kar sakte he so very nice idea 🤝👍
Thank you friend, amazing video, I became your subscriber because I need to learn more about home automation, and I thought your project was incredible. Thank you for teaching and sharing the project
Good and compact design.. few elements placement error are observed while uploading the file request you to revisit the file and upload the correct one
but there will be a problem if we turn of the light from both the places(switch) and(phone) then the bulb will turn on because in this case switch will be connecting nc(normally connected) and common of relay and because the switch is turned of from the phone relay will be in nc(normally connected) mode so, thats the problem we can over come this by using the switches to gpio pins directly but the no. of appliances will be less
hi great video, don't understand Hindi, sorry, but tried to order PCB , uploaded the parts list and 10 errors on sourcing from smc parts, and cannot correct or find 300ohm resistors etc.. cannot find parts to replace on the incorrect items, but a good video... thank you anyway..would love an English video...
What if manual switch in ON position, and asked Alexa to turn ON? Similarly manual switch in Off position and said Alexa to turn ON How it works? Need combinations and it's drawbacks
What happen when Switch is On and we turn on Bulb using Alexa ? Reply to me please I really confuse between combination Switch and Alex that you build. Switch Google Home Bulb State Off Off OFF Off On ON On Off ON On On OFF is the above sequence is correct or not?
Hii sir Gerber file kaise upload kare jlcpcb per upload nhi ho Raha hai upload karne ki bahot kosisi ki please sir koi solution do meine 18 relay bhi manga liya
Перевод текста с помощью камеры Hello, can you help? In short, I have an old PC and I want to control it from my phone (I know about Ani disk, it doesn’t work on this PC) and play PC games from my phone How can this be done? Is there some kind of remote virus, etc.?
First Time On RUclips In Hindi language. That's sounds interesting....... ❤️❤️
thank you
@@Rizwansideas good
@@Rizwansideas I recently setup my computer with 'hyperion ambilight ' and searching videos for home automation. RUclips recommendation delivered yours to me. I dunno hindi but this is a great video.
Amazing idea sir. Is ideas se hum apne abhi chal rahe corona time me boht Fetfully ho sakta he q sab chiz ko toch karne se door hoke hum apne mobile se on ya off kar sakte he so very nice idea 🤝👍
thanks sir
Thank you friend, amazing video, I became your subscriber because I need to learn more about home automation, and I thought your project was incredible. Thank you for teaching and sharing the project
Good and compact design.. few elements placement error are observed while uploading the file request you to revisit the file and upload the correct one
but there will be a problem if we turn of the light from both the places(switch) and(phone) then the bulb will turn on
because in this case switch will be connecting nc(normally connected) and common of relay and because the switch is turned of from the phone relay will be in nc(normally connected) mode
so, thats the problem we can over come this by using the switches to gpio pins directly but the no. of appliances will be less
good video with good voice
Hindi perfect hai aap plz kuch idia dijiye mere project k liye
First time on yt in hindi
Good evening sir, which pins are used on esp32 to trigger the relays
Sir, So Good Idea 🤝.
Bhai Hindi me achhaaa se samj aata hai ❤❤❤❤❤ aap Hindi me hi video banaye
sir components kon sy lagaye hein pcb order krty huy
Great work Rizwan, Can you help with a code for 8 channel with Wifimanager without using Sinric or any third party platforms
Amazing Rizwan bro 👍👍👍
thank you
@@Rizwansideas your welcome
Apki hindi mast hai bro
Thank you
Good job bro & awesome voice
thanks
what software do you used?eagle,altium or esyeda
Nice project bro and good talk
thanks
hi great video, don't understand Hindi, sorry, but tried to order PCB , uploaded the parts list and 10 errors on sourcing from smc parts, and cannot correct or find 300ohm resistors etc.. cannot find parts to replace on the incorrect items, but a good video... thank you anyway..would love an English video...
Is the issue is resolved or persist
Very good video
Great project!!! Could you share the electrical diagram so I can suggest some decoupling improvements?
Cooling ki jarurat padegi ya nahi ?
Approx how much cost for this type project.
Are your all relay even used?
Very very nice 👌
Bohat acche
thank you
Bhot jordaar
thanks
Mind blowing 👌👌
thanks
Amazing bro
Thank you brother
Thanks very much !
You are welcome!
Plz also show how to voice control it with google and other services
Bhai yeh ready mil sakta h kya ??
Or home par koi install kr skta h kya ??
Cost kitna padega iss full setup ks
Bahot accha
Masaallah
Aamin
Allah tume kamiyabe de ❤️
@@Rizwansideas summ aamin
I have made a home made PCB, something with 6 relays, please tell me what to do for it.
bro we need to change to our old switches to 2 way switches
Please make a 4 rellay with Google assistante & Alexa video
Nice device
Keep sharing videos
Keep it up
thank you
Relay module se ESP32 wiring connection ko kon sa protocol bolenge sir ?
Superb
thank you
Bro I have esp8266 can it work on it and give me code for esp8266
it's a great job , I want the code used, please, because the link does not work.
Hi. What is your pin configuration for connecting relay module to esp32
Do we have to pay for sinric pro for devices more than 3
Sir this device is control with rainmaker app
What if manual switch in ON position, and asked Alexa to turn ON?
Similarly manual switch in Off position and said Alexa to turn ON
How it works?
Need combinations and it's drawbacks
Is this work with Google home mini
Amazing
thanks
Bro..... What will happen if turn on the switch manually and ask the alexa to off
Did you find the answer
Hindi me continue karo
bhai hilink ke AC to DC converter ka use Nodemcu ko power dene ke liye kaise kare please help yaar
Good 👌👌
Kya ye esp mil skti hy ap se proframmed??
When i can buy already programmed
Hiii sir iam ready to buy this project so please tell me the total cost for this...
How much does it cost to buy the pcb board
Bro you could have just use one 2 way switch and use existing switch too
Are you electronics and communication engineer?
no I'm 3D artist
What happen when Switch is On and we turn on Bulb using Alexa ?
Reply to me please I really confuse between combination Switch and Alex that you build.
Switch Google Home Bulb State
Off Off OFF
Off On ON
On Off ON
On On OFF
is the above sequence is correct or not?
I want to learn more about setup
Hi i have faced issue with my esp32 chip can you help me out ?
Hii sir Gerber file kaise upload kare jlcpcb per upload nhi ho Raha hai upload karne ki bahot kosisi ki please sir koi solution do meine 18 relay bhi manga liya
ભાઈ આ પ્રોજેકટ સેમ firebase સાથે બનાવો
મેંન્યુલ અને mit app ઇનવેન્ટર feedback સાથે
hi can we use 16 channel relay module do make it without pcb
Yes
Brother this is Fantastic... But Sinric is ending on 31 Aug... :(
Do you have any other Idea... Please help....
sinric pro, 3 free devices 3 us$ by year for each device per year.
What is the cost? Can I buy it
Bhai apne bataya tha ki Arduino course ka link h discription me pr course ki link hai code ki hai 😢😢 please send me the Arduino course link.
Compilation error: 'json' was not declared in this scope, como corrigir
Can you make a steering wheel for RFS plis? I really need it.
Hi Rizwan, Do you have this board sell to me?
assembled or just board
Yas I have contact me rizwansideas2@gmail.com
@@Rizwansideas I sent email already
Sir Mujhe sikhna hai automation Help kar sakte ho please
Sinric pro me to 3 se jyada divice k liye to paisaa dena padta hai naa..... To 18 divice kese add hoga???😢
Dude did you pay dor templates?
componant select kartevat problem aa raha hai please help
Hi can we control speed of a fan
can we buy the project?
Sir iska pcb mil jayega
Will you send me the 17 channel complete pcb box and also send me the price of it
Bhai aapki Gerber file me issue aa raha hai
Kya aap mujhe fir se send kar dakte ho mujhe bohot hi argent h mere project ke liye
70 release system how much price in Bangladesh
how much price
bro I can download to PCB grabar files pls help me
Перевод текста с помощью камеры
Hello, can you help? In short, I have an old PC and I want to control it from my phone (I know about Ani disk, it doesn’t work on this PC) and play PC games from my phone
How can this be done? Is there some kind of remote virus, etc.?
Cost??
Bro that sinric change into sinric pro and please give the code to control 18 channel with sinric pro
how can I upload Graber file from link?
I need a person who has the whole knowledge of home automation and know whole knowledge of esp boards . I need help plzz reply
Mujhe pura buy karna hai
ac to dc 5v power supply q use Kiya
हिंदी में समझने में आसानी होती है। लगातार हिंदी में बनाइए
How to open pcb design
I need a 2 pis complete PCB
Amitabh bacchan ka awaz hota to maza hi aa jata
😁😁
sir itna hamara budget nahi hai
Wo sab tumare sochne ka howe
I want a 50 LED connect ?
Please ESP 32 programming video one item video link please
Bhai pur circuit ka diagram milega
Ap pakistan se ho??
I'm from India brother
Sir esp32 16 octocupler ko handle kr sakta hai kya
Yas
ये lagane के बाद बिना wifi के chal jyga
Jlcpcb ka video bhejo Kasai banaye jlcpcb ko