ESP32/ESP8266 Relay Module - Control AC Appliances (Web Server)
HTML-код
- Опубликовано: 17 дек 2019
- ESP32 Project (schematics + source code) ► RandomNerdTutorials.com/esp32...
ESP8266 Project (schematics + source code) ► RandomNerdTutorials.com/esp82...
Using a relay with the ESP32 is a great way to control AC household appliances remotely. This tutorial explains how to control a relay module with the ESP32. We'll take a look at how a relay module works, how to connect the relay to the ESP32 and build a web server to control a relay remotely (or as many relays as you want).
SAFETY WARNING: in this example, we’re dealing with mains voltage. Misuse can result in serious injuries. If you’re not familiar with mains voltage ask someone who is to help you out. While programming the ESP or wiring your circuit make sure everything is disconnected from mains voltage.
Like my page on Facebook:
/ randomnerdtutorials
Follow me on twitter:
/ ruisantosdotme
Subscribe for more projects like this!
bit.ly/subscribeRNT 
Наука
You can find on my blog the full step-by-step instructions for each ESP board.
ESP32 Project (schematics + source code) ► RandomNerdTutorials.com/esp32-relay-module-ac-web-server/
ESP8266 Project (schematics + source code) ► RandomNerdTutorials.com/esp8266-relay-module-ac-web-server/
Rui Santos Hi, I bought your ESP32 course, it turns out that I need to send digital values from 16 GPIOS, and send them to a platform called Ubidots, but I still don’t know how can I doit, can you please help me about?
@@ingenierocristian hello, unfortunately I've never used that platform before. Have you tried their sample projects from the library? Thanks!
@@RuiSantosdotme Ubidots is quite similar to the project you made in the Module 7 of your course, except this platform integrate its broker, it uses the MQTT protocol
@@ingenierocristian I think they have a library with a bunch of examples that show how to use the platform. Did you try their library examples? You can also use any MQTT example (instead of using an IP address, you use their domain name, then check which topics you need to subscribe to)
This is the third project I'm trying. Yours was the only one who works. Thank you a lot my friend, hugs from Brazil
Thank you for your kind words, I'm glad it was helpful. Greetings from Portugal, Rui
Thank you so much for sharing this wonderful video!It means alot to show and educate people who are trying to do gadgets like these.
Clear and concise. Great video. Thanks.
Congratulations Rui!! Great solution, thanks so much.
Hi Rui, Thank you for this fantastic video.
Is there a limit to the number of Channels which can be controlled using a single 8266 NodeMCU component?
i have watched a lot of videos about home automation using esp 8266 but nothing worked . but to my surprise, this time it worked . means a lot bro
Congratulation Rui!! Great solution. Thanks so much.
Hey great video! I got a question, do I have to find a 3.3v relay for using in with my ESP32? or what is the model youre using in this video? Thanks, I apreciate your work!
Your video is always so clear and also your website .all the necessary things are present in website
Keep posting ...
Thanks! I'm glad you found it helpful
This is great... you are great... where the hell was this video 8 months ago when I needed you? lol. Good work!
Thanks!
@@RuiSantosdotme Hey, so going through your posted project, do you have any recommendations for setting this up and accessing the ESP without port forwarding on the firewall? Something like a websocket server/client with an Android app?
Thanks
Thank you. This was very useful!
Wow now that is really awesome and clean code! Thank you so much:)
You're welcome! thanks for watching
Thank you my friend by your project ,Im come from Vietnam.
Great job if I wanted to only be able to have one really on at a time example if I have four relays and I turn on number one then I turn on number two in the code how would I have it so when you switch relays it auto shuts off pervious one
Thank you. Helpful as always.
Thanks!
really good stuff keep it up
simple and usefully video.thanks.
Thank you for the video sir.
I followed your tutorial and built a similar project Thank You it was a fun build! is there a way to name the relays independently in the web server? I have them performing specific functions and I'd rather them have a name other than Relay #1 - GPIO 16 etc... I'd really appreciate your help
Olá Rui. Parabéns pelo video e pelo canal. Gostava de saber se é possivel fazer o seguinte:
ter o som ambiente por zonas com botão no Home assistant... será que é possível com esp 8266 ou wemos Com relé E adicionar o sistema ao HA com botões?
Tipo - ligo o sistema de som e as colunas estão todas ligadas
- se ligar o botão 1 toca na sala
- se ligar o botão 2 toca no WC
se ligar os 2 tocam em ambos os espaços.
Obrigado
Great tutorial dear
Thanks for your video dude. I have a question? If I need a relay that can handle a 48VDC out with 6A. Can i connect to 2 relay that give 30VDC and 10A each to control only this 1 equipment?
Very nice video. It worked perfectly when I repeated it. Could do you please improve it by making it accessible from anywhere over the internet? thx
Hi Rui, The tutorial is nice. i have tried using the information provided in your tutorial. Able to control the relays only when my ESP8266 and Laptop (where i am opening the web page to control the relays) are connected to same network. If both are connected to same Wifi network, the ip address is not opening. What might be the issue? Do you have any inputs?
This is great! thank you
Отличный проект. Можно ли добавить простой таймер, например после движения ползунком влючается реле, а через 5 сек. отключается и ползунок возвращается в состояние выкл.
Hi, great project! I need to use all 8 channels with ESP8266 could you tell me which pins to connect the remaining 3 channels to? Thank you.
Took me 10 mins ... Thx
A good work. Really i like
nice presentation! thank you
You're welcome!
Very nice , let´s say as is 5 relay, each controled by each button now how to add a button to turn off/on all at the same time,the idea is that leaving house and turn OFF all ligths or getting home turn on ligths ON, is it possible ?
Thanx this was helpful
Good day Mr Santos, thank you for your videos, Ive learned a lot from all of them. I was wondering if you could help me regarding relays...
So I have a simple webserver where I can turn a relay on/off and I have three LDR sensors as inputs for the three status LED of the water pump I want to control. Ive used the meta-refresh to refresh my web server every 30s, BUT once the server refreshes, my relay quickly turn off and back on again during the reset. Is this one of issues related with using meta-refresh or does this sound like bad coding?
EDIT: I fixed it within an hour of typing this message, Ive connected the relay to GPIO2 but I was so focused on my coding and other stuff that Ive failed to remember that the buildin LED is also controlled from GPIO2. Luckily this is an easy fix.
Ive used the buildin LED to give me wifi status updates as well as data coming from the client, that is why my relay went mad.
Ill leave this comment to help others.
Hi good video, could you tell me how did you do the app to your celphone, thanks a lot
Hi,
Followed your video and it works. The problem I encounter is that when I open my motor, I need to close it before I can open other device. I believe they should work simultaenously. Whats wrong with my circuit?
Good explanation
Thanks!
fantastic!!
nice video.. but anyway i have a little question about how to change the credentials without hard coding again.. thanks in advance..
Is internet connection or wi fi
compulsory with this module can I use this module for switch on off with mobile directly
Vou testar isso assim que tiver tempo. Serias capaz de me tirar umas dúvidas?
I see this tutorial only control 5 chanel ? Can this device use 8 chanel ?
Could I use the same project to control more than one home light bulb?
Or I need to buy 8 channel relay module to control all the ceiling light bulbs in my room?
"I mean the main voltage home light bulbs not the external light bulbs".
Thank you.
how to acces the node mcu from external network...do we have to perform things like port forwarding to acces the same throuh the internet
Good video
I have an esp and i want to monitor the lights of an electromechanical pump's control box. The lights are 24v ac i need to read their status on or off with the esp is it possible to read the relays status with this module?
Hello. do you have any idea how it can work with xlights with an esp32 16 channel relay?
Thank you😃, i was wondering why it doesn't work, then i realize the jumper caps were removed!
Hi Rui, is there a way to do the same using softAP.
Hi Rui, Greetings from Brazil! I have two questions:
1) I have a Module with 8x Relays, but it works with 12V, so how should I connect it to ESP32/ESP8266? I know I must use External Power, but how do I make the connections?
2) And that JDVcc jumper I don't understand what it's for. Thanks
Hello and thanks for this beautiful video. Can you tell me how to connect to this Esp32 from WEB and not only from same network??
You can use Firebase or any sort of database. Connect it to your Esp32 , make an android or IOS app.. and you are done! There are plenty of videos on how to connect Esp32 with Firebase. Hope it helps!
Hi Rui,
I though you need 5v to move the coil of the relay, are the 3v of a nodemcu enough to control relay? Or do you use an extra power source to make it work?
Elpetit Cafe I had to buy 3v relays as my esp32 couldn't supply enough to use the 5v one I was using with my Arduino that ran on 5v
Hello. Can I control 24V relay with 3.3V(12mA) output GPIO? So using ohms law i need 2k ohms to get 24V. Will this work?
Hello! if I want to supplement it with a LoRa module due to the longer range, what should i do?
Hello!!
What if i want when i sent the command to close the relay, it will close in one or 2 sec it self?
Thanks!!
hi
i like your video , but i have question that,
i am using esp 32 for my rgb lights {wled} and i also want that esp board to turn off things that i link in this video,
so plzz tell me can i makeor run 2 commands always on a single esp board
u can also make video on that
Thank u....Rui...
Hi Rui don't you want to make weather station based on your ESP-32 weather shield with another wirelessly connected another shield that one will be inside and one outside that will be shown on display and on internet and maybe solar powered i think that would be awesome sorry for my poor english keep what are you doing and happy holidays!
una pregunta, estoy estoy trabajando en un proyecto para automatizar el reguio de un cultivo por bonbas de agua, el control de la automatización se hara mediante una aplicacion wed, tengo un modulo esp8266 y un rele de dos canales, la pregunta es a pesar que el rele dice que solo soporta 10-15A Y 125 VAC - 250VAC, no hay problema si lo utilizo para una bomba de agua de 110 vcc?
Excellent
Good video, i have a problem my relé module needs 5v and the esp8266 just send 3.3v and it doesn't work please help, thanks a lot
I need to do this at some point. My solar setup (tiny 12 volt batteries) must be off at night (draining from the controller, mostly) and my sister got some ideas where she lives.
Hi, I need to make an I2C communication between an Esp 32 and Esp8266, where can I find info about?
Thanks for the video. I see use 2 skits for ESP8266 and ESP32. Couldn't you combine both sketches and just use the sketch for both ESP (8266 and 32)?
You would then only have one sketch, which then works for both ESPs.
The examples demonstrated in this video work for both boards, if you notice I use a condition to include the proper WiFi library if you're using the ESP32 or ESP8266 (time of video 4:42 and lines 7-12 ). I hope that helps!
@rui Santos : can you help me with code in your Relay code, to have the Internal LED of ESP8266 Blinking while the WIFI is being Connected, and stays ON once connected to wifi, Unable to be sure if it was connected or not if not connected to computer.
hi, may i know what database u are using for this project?
Exelente.obrigado pour partilhar.Bom ano!
Obrigado! Abraço!
rui, how to post data without refreshing the page?
Hi Rui,
Just came across this video, i must say very well done, nice clean code and awesome explanation !!
i do have a question though, i would like to name the relays, i don't want to see the "Relay#1 - GPIO 14" text, can you please update the esp8266 sketch?
Hey Rui, don't worry, i got it working the way i want to :)
Still, thank you for your great video, it helped me a lot!!
Hay we are using it by Wifi, but can we use it by Manually + Bluetooth enabled........if Yes, then what will be the circuit diagram and codes?
Can I control 1 phase AC motor
Can we Controll led output of 1 volt
Hi Can you please create version of this script that allows to control relays based on Temp & Humidity??
Hi ! First of all thank you very much for all your tutorial and content ! Thanks a lot !!
I have a question:
I'm starting to program an ESP32, and what I want to do is to use data that I wan’t to input through an internal html site, exactly as you do in one of your tutorials using the ESPAsyncWebServer Library, and at the same time I need to be able to auto connect the device without hardcoding the Password and Name of the net, so I can do it more “plug and play”
Where should I start studying? Is there a way of combining both libraries, or some of those features are also possible to make in both libraries?
Thanks a lot !!
that's exactly what I am looking for too, I hope he replies back to this.
How reverse the output,
Relay 16 channel have positif input.
I have a hosted domain. How do I make this project controlled over WiFi not with a local network
Is this can be controlled from anywhere in the world
hi sir is it a local server only? thanks in advance
Hi how to name each gpio? as Relay #4 renamed to garage?
Do you need an ip pubblic? Thanks
Is the relay module 3.3v or 5 v
5v
Good Day Sir!, In my current project I am combining your codes for the dht22 and relay. I encountered a problem and it says "relayState is not declared in this scope"...can I ask sir why is that?
put this at the starting of the code:
String relayState(int i);
Sir i need, auto on relay when connected to wifi can u help me? M a beginner
Is this tutorial for RELAY with active LOW? Mine is active low.
Can you also explain the code?
the lines with code:
request->send_P(200, "text/html", index_html, processor);
The function: String processor(const String& var) { .....}
I thought you have to pass argument into processor function on "request->send...."
how to make if turn off relay 1 turn on relay 2?
Is there anyway to control it through internet is????? Plzzzz
This project based on local area network or global ?
I use this relay module but the relay won't change even thou the led change with 3.3v from nodemcu
Olá ! Amigo
Seus videos são bons
Faca em português , que vc vai ter muitos seguidores no aqui no Brasil
ATt
Hi Rui, ESPAsyncWebServer is not available... What can I do? Could it be that it does not exist anymore?
when connecting my 4 channel module to the gnd and 5V pins of my esp32wroom32u wifi disconnects and can't access webpage (I made my own)
What could be the issue? the module is taking too much energy?
you are genios
What if I want to control the relays using blynk?
Hello! i have a question. if you close the webpage, and you open it again, does it still show the relay state? if the device is on or of?
Yes
i know it is long time this video was relased but i tried it and is wdt reseting can somebodz help me????
when i run the code i don't get any error but nothing shows up on the serial port i pressed the rst button
why?
Compiling error for ESP8266, Wemos D1 R1 mini, Thank you
Hi. Can we access to esp8266 from anywhere ? Thanks.
i have ESP-01s Relay v1.0 ..... with ESP8266
how to easily connect to a phone and
to control the relay
If you have Wifi Access search for "esp http-switch". It let's you controll your ESP by entering URL's in you browser. e.g: "my_esp.local/switch_on" or "my_esp.local/switch_off
That's the easiest way I know of and it also works with any other device which can run a browser (or some sort of http-request service) :)
and webserver with espalexa?