Would love to see a tutorial on installing a webserver to the ESP32 such that it shows data collected from either its UART or BLUETOOTH interface. Especially using VS Code and the ESP-PROG (jtag) programmer!
Sir can I add 2 more led buttons in the server.Can I control a 4 channel relay with one esp32.pl help sir.Thank you for your valuable videos and your zest to create awesome ideas for people like me.
Thank you so much! I would like to contact you to find out how you make and edit those nice videos. I would like to shoot something similar in Portuguese for Brazil.
Is there any way to make the display of the ESP32's webpage automatic, immediately after joining it's network? Putting it another way... can the steps of manually getting the IP address and manually opening a new browser window be automated. I want to just join the ESP32's network and jump to its web page.
My esp didn’t show on my Wi-Fi at all I have tried it with the three of my Esp32 after pressing the reset button it didn’t generate any IP address neither is it in coverage
Brilliant! - managed to get the Station Mode version working but now the Access Mode won't accept the ESP-Password? any suggestions? I have check the upper and lower case characters and the ESP32 Dev Mode has an IP address. Any help would be appreciated from anyone.
Hi, I can't seem to get the LEDs to light up. I'm using a 30-pin ESP-WROOM-32 (which has a slightly different pin out). The ESP32 is registering that I'm connecting to the webpages when I do so from my phone, but the LEDs don't light up... I've tried different resistors, wires, LEDs and rails on the breadboard, so I'm fairly certain the problem is software... do you know what I should do?
can a setup a web server in order to anyone request it, not only the clients connected to the same network ESP32 is ? if its possible, what should i do?
Can i put my wifi name and password in my home because if i do this in video the internet will be disconnect, and i want to make Browser connect to internet because the html control page will be a part of my website that Depends on internet please Answer me because I need it for my graduation project. Thank you ❤
Most indians are explining very bad or even don't explain. You are a special one. I learned so much arduino and esp32 from you. You should keep this chanell alive!
Ok, I'm using the ESP32 as an access point. This works fine for me when I use a desktop browser to access the page, but I just get a timeout error when I try to access it through a mobile browser as shown in this video. I really need the mobile option to work for my application... any ideas why it might not be working? I didn't modify anything in the index.html file.
Hi, i have watched over 50+ videos for esp32 but i am building a project using web server for esp32 to control DC motors and servos parallelly can you help me in coding part ?😢
Thank you very much for your video. I'm very glad to watched it. I would like to see a video about connection SD card to ESP32. I will be very grateful to you for this .❤
How do I get com port for ESP32 espressif for windows 11? I tried CP210X universal Windows Driver V11.3.0 6/24/2023 I use Arduino IDE 2.2.1 with 115200 baud, but it didn’t work. The following works fine, Arduino UNO, UNO R4 WiFi and UNO R2 WiFi Please help.
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
excelente funciona corretamente !!!! obrigado pelo seu conhecimento e demonstração do mesmo!!
the sketch uploaded fine; then I went to the serial monitor for I.P.; it gave me the IP address with does not connect
Great explanation. Thnx
No problem
Sir everything is fine.But I am unable to control the server from my mobile hotspot.Can I control the server from anywhere with the IP address
Would love to see a tutorial on installing a webserver to the ESP32 such that it shows data collected from either its UART or BLUETOOTH interface. Especially using VS Code and the ESP-PROG (jtag) programmer!
Sir can I add 2 more led buttons in the server.Can I control a 4 channel relay with one esp32.pl help sir.Thank you for your valuable videos and your zest to create awesome ideas for people like me.
Yes, of course
github.com/Enjoy-Mechatronics/ESP32-Web-Server
● Playlist Link: bit.ly/3TdXiq5
Thank you so much! I would like to contact you to find out how you make and edit those nice videos. I would like to shoot something similar in Portuguese for Brazil.
Can u explain the difference between wifi access point and wifi server
Can we connect Microphone and relay module with Esp32 ? If yes, then how can ? Please give suggestions
Is there any way to make the display of the ESP32's webpage automatic, immediately after joining it's network? Putting it another way... can the steps of manually getting the IP address and manually opening a new browser window be automated. I want to just join the ESP32's network and jump to its web page.
The answer is here
ruclips.net/video/4bpU2V0kms8/видео.html
which libraries do i have to install previously
My esp didn’t show on my Wi-Fi at all
I have tried it with the three of my Esp32 after pressing the reset button it didn’t generate any IP address neither is it in coverage
Brilliant! - managed to get the Station Mode version working but now the Access Mode won't accept the ESP-Password? any suggestions? I have check the upper and lower case characters and the ESP32 Dev Mode has an IP address. Any help would be appreciated from anyone.
Solved my own problem ... the ESP32-Network didn't like the '-' in the password - So ESP32Password worked perfectly.
Very straight forward and worked with no issues.
çok teşekkür ederim, onlarca video ya baktım ama en açıklayıcı video bu olmuş, elinize sağlık
Followed all instructions. But browser does not connect to ESP network. Please help.
Allow "nearby devices" permission from the app sttings
Hi, I can't seem to get the LEDs to light up. I'm using a 30-pin ESP-WROOM-32 (which has a slightly different pin out). The ESP32 is registering that I'm connecting to the webpages when I do so from my phone, but the LEDs don't light up... I've tried different resistors, wires, LEDs and rails on the breadboard, so I'm fairly certain the problem is software... do you know what I should do?
You need to change the number of the GPIO in codes to your version
Your connection is not okay
Kya hui😮
i dont know how to thank you man ....your video has been soo helpfull and i also learned so many new things ....thank you sooo much
Glad I could help!
can a setup a web server in order to anyone request it, not only the clients connected to the same network ESP32 is ? if its possible, what should i do?
ESP32 web server means local area network hota hai ?
This looks nice, but I want to control more than one 220v relay, so can I use 4 esp32 with one relay on each?, thanks
Yes, you can,
but you could connect more than one relay to the same esp32 board.
Can i put my wifi name and password in my home because if i do this in video the internet will be disconnect, and i want to make Browser connect to internet because the html control page will be a part of my website that Depends on internet please Answer me because I need it for my graduation project. Thank you ❤
Hi! I'm facing the same problem as you, have you solved it, and how? Thanks you.
Most indians are explining very bad or even don't explain. You are a special one. I learned so much arduino and esp32 from you. You should keep this chanell alive!
He's Tunisian :)
So nice of you
Ok, I'm using the ESP32 as an access point. This works fine for me when I use a desktop browser to access the page, but I just get a timeout error when I try to access it through a mobile browser as shown in this video. I really need the mobile option to work for my application... any ideas why it might not be working? I didn't modify anything in the index.html file.
Excellent !! Very clear !! Thank you
Glad it was helpful!
Is this project work without internet
yeah we just need Local wifi communication
This is such a great series, I’m extremely grateful to you for sharing all of your knowledge
Glad you enjoy it!
@@EnjoyMechatronics Indeed, I have just finished this experiment and I am very impressed. Thank you once again.
is this your code? the same code was shown with same output on an older more popular video.
I have used the example sketch that comes with the ESP32 package and a little bit of html to create the project
@@EnjoyMechatronics ???????
good buddy😀
Thanks for the visit
Thanks it heloed me a lot
Excellent!
Thanks 😊
Hi, i have watched over 50+ videos for esp32 but i am building a project using web server for esp32 to control DC motors and servos parallelly can you help me in coding part ?😢
Thank you very much for your video. I'm very glad to watched it. I would like to see a video about connection SD card to ESP32. I will be very grateful to you for this .❤
Great suggestion!
@@EnjoyMechatronics I will look forward to it
Sir Can we change the sssid and password in it.
Definitely
@@EnjoyMechatronicssir can you guide us please
How do I get com port for ESP32 espressif for windows 11?
I tried CP210X universal Windows Driver V11.3.0 6/24/2023
I use Arduino IDE 2.2.1 with 115200 baud, but it didn’t work.
The following works fine, Arduino UNO, UNO R4 WiFi and UNO R2 WiFi
Please help.
من لهجتك عرفتك ههههههههه، الله يوفقك
بارك الله فيك
Can u plz tell me where to put html code?
ruclips.net/video/_GohoygyCN/видео.html
It is much cleaner!
github.com/Enjoy-Mechatronics/ESP32-DHT-Webserver/blob/main/ESP32-DHT-Webserver.ino
@@EnjoyMechatronics Thank u😃