this is best series ever of esp32 it has everything i want like same esp32 board and i also want how we can use html file as is this included in this series thankyou so much sir for your efforts
Just in case this helps someone. My ESP-WROOM-32 REFUSED to connect to my home SSID. Connected to my Phone Hotspot fine, but not home SSID. Packet capturing the network showed the device was sending a DHCP DISCOVER, and my router responded with DHCP OFFER. HOWEVER, the offer had an "error" that the NTP value was not a multiple of 4. No idea why... looked fine to me. I deleted the NTP value from my DHCP server on my router and the ESP32 connected fine ever since.
hi i unconnected my lap from esp and then i cannot access to the IP address anymore, so i wonder if there is a way to commnicate wirelessly to turn on/off the led (i use battery to power the ESP32)
txs a lot fo rthis content! oe question, what is the advantage of using it in access mode (or disadvantages). Also is i t possible not to setup a password?
it throws the "Brownout detector was triggered" error. the board is connected to a laptop through its usb port. is there anything i can do to bypass this error and make the esp32 work?
That means your energy is too little for the ESP32, here's the code to disable it. #include "soc/soc.h" #include "soc/rtc_cntl_reg.h" void setup() { WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); } this code basically tells the esp32 to stfu and do its work as intended, but its still better to get a better cable for the esp32.
Very clear explnations. Unfortunately after uploading the program simpleweb server ( I used mobile phone as hotspot) the serial drops ..... Someone can help to solve?
Amazing tutorial! Does the Ip-adress change everytime, or do i need a domain-adress? Does my smartphone also be connected on the same wifi? Edit: Can I create an additional File for html code and one for javascript?
> Yeah, the ip address does change, but we could use ESPmDNS library to assign a simple name instead. > With this method, you have to be connected to the same network > You can add multiple files by using Peripheral Interface Flash File System (SPIFFS). SPIFFS is a lightweight filesystem created for microcontrollers with a flash chip, which is connected by SPI bus, like the ESP32 flash memory.
When I had this initial problem, I logged into my router and found a page that showed all devices connected to the router . When the esp connected it had the ip address. The approach was similar to how he explained with the port stuff.
I don't know what I'm doing different than you but there are NO wifi examples included in the download from the board manager. The latest is 2.0.14 but I went all the way back to the package you installed in the last video, 2.0.5 and there still were no wifi examples. Edit: I went to your Github page and found an Arduino ESP32 package and tried to use the simplewebserver file from it, but is does not work. It stope at, "Leaving... Hard resetting via RTS pin..."
1. Please use the serial monitor to view what it says, the screen your looking at is not the serial monitor, but rather the output. 2. You have to set your microcontroller to the ESP32 bundle for you to see all the examples of the ESP32.
@@EnjoyMechatronics I am needing some help with displaying a web page. Maybe you can guide me in the right direction. I want to use an ESP32 as a web server and have it transmit battery voltage, rpm, scale mph, and mph. I have the math and programming figured out so I can read it on the serial port, but don’t know how to get it to be able to see the information on a iPhone or iPad. I am 72 years old and have a hard time learning all this computer stuff, but I am trying. I have watched some of your videos, but still not sure how to get the variables to display on a web page. Thanks for listening.
1. Did you set the Baud to the correct amount? if not, place your baud to the same amount as stated on Serial.begin();. 2. Did you use the correct GPIO pin? check again to make sure, if not, please ensure that you used the correct code for it.
best video regarding esp32 on yt.. peaceful and slow explanations without hurry.. demonstrating every step.. thx so much for ur efforts
Thanks for the kind words!
this is best series ever of esp32 it has everything i want like same esp32 board and i also want how we can use html file as is this included in this series thankyou so much sir for your efforts
Your videos are excellent. Clear explanations, great length, great graphics etc. Nice job!
Much appreciated!
Just in case this helps someone. My ESP-WROOM-32 REFUSED to connect to my home SSID. Connected to my Phone Hotspot fine, but not home SSID. Packet capturing the network showed the device was sending a DHCP DISCOVER, and my router responded with DHCP OFFER. HOWEVER, the offer had an "error" that the NTP value was not a multiple of 4. No idea why... looked fine to me. I deleted the NTP value from my DHCP server on my router and the ESP32 connected fine ever since.
how did you do that?
Really great videos man! Very informative, concise and well put together. I really appreciate it
Glad you like them!
This the one tutorial I was looking like mad man
It is the best one for esp beginners 👍👍
bro ur actually the best at giving good info
Excellent tutorial, well explained, thank you very much for your contribution.
I'm so glad you like it 😊
Sir Thank you for your simple teaching with vast knowledge
I just want to hear him say "its a me, a mario!!"
hi i unconnected my lap from esp and then i cannot access to the IP address anymore, so i wonder if there is a way to commnicate wirelessly to turn on/off the led (i use battery to power the ESP32)
Sir, I have question. While I upload to esp32 there have "flash read error 1000", what I Should do. thank you sir
How did you get around the Debug issues? What version of the Arduino IDE are you using?
Nice and easy explanation. Love❤
Thanks a lot 😊
making a tank with esp32. great series to help
Great!
Thank you so much, your video helped me a lot.
Glad it helped!
Thanks for this good video now my ESP32 works with wifi
Glad it helped
Do you know why I would get disconnected from the website and have to press reset button of the ESP32, all the time, to get reconnected
Why its showing " waiting for download" in serial monitor after pressing reset button of ESP32CAM??
Sir in serial monitor it is trying to connect to a wifi but it is loading and not connecting what is the problem
I have the same problem...Did you solve it?
@@filipdamaskovic4292 yes
Set ur hotspot to 2.4 gz it is by default 5ghz which esp32 doesn't support
why is there a delay (around 3 to 5seconds) for led to turn on /off
txs a lot fo rthis content! oe question, what is the advantage of using it in access mode (or disadvantages). Also is i t possible not to setup a password?
Thank you, that was very easy to follow
Glad it helped!
sir it show like connecing only ,it not connected to my network wht can i do..will u pleasesuggest a solution for it
Hello can I connect raspberry pi 4 with esp32? And send data from raspberry to esp32? if yes could you pls tell how to do that?
Great tutorial. Liked and subbed.
Awesome, thank you!
Wonderful tutorial, thank you very much.
very helpful, thanks
No worries
it throws the "Brownout detector was triggered" error.
the board is connected to a laptop through its usb port.
is there anything i can do to bypass this error and make the esp32 work?
That means your energy is too little for the ESP32, here's the code to disable it.
#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"
void setup() {
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);
}
this code basically tells the esp32 to stfu and do its work as intended, but its still better to get a better cable for the esp32.
@@chiquitathechicken thanks mate. surprisingly, switching to a different usb port solved the issue for me. It's weird!
how would you control the the client esp32(Station mode) with the central esp32(SoftAP)?
ESPNow, it's a protocol in the ESP32 exapmles.
Why do I get this error: 0x3 (SW_RESET) ?
Very clear explnations. Unfortunately after uploading the program simpleweb server ( I used mobile phone as hotspot) the serial drops ..... Someone can help to solve?
Great explanation
Glad you think so!
How much distance it can connect wifi..i mean there is any limit for this
It's about 30 meters
Amazing tutorial!
Does the Ip-adress change everytime, or do i need a domain-adress? Does my smartphone also be connected on the same wifi?
Edit: Can I create an additional File for html code and one for javascript?
> Yeah, the ip address does change, but we could use ESPmDNS library to assign a simple name instead.
> With this method, you have to be connected to the same network
> You can add multiple files by using Peripheral Interface Flash File System (SPIFFS). SPIFFS is a lightweight filesystem created for microcontrollers with a flash chip, which is connected by SPI bus, like the ESP32 flash memory.
Thank you for your fast response :D@@EnjoyMechatronics
Excellent tutorial, thank you very much
Glad it was helpful!
what if the ip address is not appear in the serial monitor?
When I had this initial problem, I logged into my router and found a page that showed all devices connected to the router . When the esp connected it had the ip address. The approach was similar to how he explained with the port stuff.
hello is there a reason i cant open the ip address ?
I don't know what I'm doing different than you but there are NO wifi examples included in the download from the board manager. The latest is 2.0.14 but I went all the way back to the package you installed in the last video, 2.0.5 and there still were no wifi examples.
Edit:
I went to your Github page and found an Arduino ESP32 package and tried to use the simplewebserver file from it, but is does not work. It stope at,
"Leaving...
Hard resetting via RTS pin..."
1. Please use the serial monitor to view what it says, the screen your looking at is not the serial monitor, but rather the output.
2. You have to set your microcontroller to the ESP32 bundle for you to see all the examples of the ESP32.
@@chiquitathechickenbro my phone can't able to connect to esp32 after clicking rest button it is saying loading and doesn't generating ip address
@@rayyanahmed1490 LOAD, then if unable, LOAD or RESET again.
Well explained
Nice for new students Good
Yes, thanks
It supports 5g or 5gh band
Nice tutorial. Thanks.
Glad it was helpful!
Sir my ESP 32 is not connecting to wifi what can I do ?
Try to reset it using its enable/reset key
@@EnjoyMechatronics sir I'm done that bat it's not working.
Sir please can you share this programing code
Are there any issues with the Mesh routers?
BRO WHAT DO U MEAN BY CONNECTING TO 'wat'
Thank you
Where to get this code
Thank sir 😊
So nice of you
excellent tutorial. How do I contact you?
Here
@@EnjoyMechatronics I am needing some help with displaying a web page. Maybe you can guide me in the right direction. I want to use an ESP32 as a web server and have it transmit battery voltage, rpm, scale mph, and mph. I have the math and programming figured out so I can read it on the serial port, but don’t know how to get it to be able to see the information on a iPhone or iPad. I am 72 years old and have a hard time learning all this computer stuff, but I am trying. I have watched some of your videos, but still not sure how to get the variables to display on a web page. Thanks for listening.
how to get .hex file for that
Randomly came across this tech. Can someone tell me what you guys use this board for?
It’s used a lot for IoT
Thanks . Sir
Any time
Sir please provide code
ruclips.net/video/aH3sLEQI4_w/видео.html
Serial monitor is just printing dots
Okay it got connected but my esp kept blinking even when I clicked on off
1. Did you set the Baud to the correct amount? if not, place your baud to the same amount as stated on Serial.begin();.
2. Did you use the correct GPIO pin? check again to make sure, if not, please ensure that you used the correct code for it.
e
ANYWAYS is not a word. In English, try saying anyway.
Thanks 😊
i got this errore (What i do)
rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4832
load:0x40078000,len:16440
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3504
entry 0x400805cc
⸮ets Jul 29 2019 12:21:46
������������� mi ESP send this to the terminal :l
press reset button on your esp32 or check the baudrate
Check your baud, if its on 9600 like how a lot of codes set their baud rate to, change it to what Serial.begin(); says on the ESP-32 code.
ai................................................................................................................................................................................................................................................danan