Good vid, I’m sure I can speak for others I cannot find a Mazda 3 build channel... Just picked up a 08 Mazda 3 sedan in mica black... Looking forwards to your channel growing With all the mazda builds.
Brady Huselton no that would be niccee mines got cloth with tiny 15 inch Wheels, I’m looking for a parts car in my area maybe seats and some odds and ends.
Another awesome video bro! I’m doing the front and rear sway bars in Mazda 3 ( whiteline high performance ) and this helped heeeepppss !! Much love your Aussie bro!
Cool video, just want to note that you can’t use your phone to measure angle while you are cornering because it uses an accelerometer to detect angle. The lateral G forces will throw off the measurement.
What the actual heck, lol. I had some parts in my rear suspension changed because they were too old, and I've felt the rear swaying over bumps ever since. I thought the mechanic was at fault, but it seems like it's just how this suspension setup works.
I want to start a yt ab my mazda 3 but youve done so many videos on it i feel like i would just be copying :'( but good shit with the content bro helps out a ton
Nice for the advice, my back end was seriously getting on my you know what.. I noticed these Mazda, have an untrusted back end anyway, can flip out, so must try this if I keep my 3 any longer.. Bless
Upvote: This is exactly like my 2008 MS3 that I did this afternoon. Didn't need a breaker bar on anything. Just a palm-heel strike or two. And this was despite 5 years of Connecticut winters. Not true that "everything is 14". The end link nuts were 17 mm. You should have lifted by the lower control arms. Otherwise the sway bar hits the suspension and cannot be fitted in properly.
I know I need to but jeez I'm worried about inspecting under my Mazda, I need to get some jack stands so I can do it safely at my place, I've got a feeling the way I plan to drive I should do this also, but as mentioned earlier I really need to figure out how they've messed with the exhaust system.
Do you have a video on the replacement of the front sway bar. I just lowered my Mazda 3 sedan and discovered my front sway bar bolt holes are pretty worn and way bigger then they should be. Gonna try to replace myself if it’s possible.
@@ColtonRichter dang that sounds out of my wheel house. I guess I’ll let that for the garage. How much you think that affects steering and suspension components? I’ve had the car 5 years and replaced almost everything under the front end except cv axles and that front sway bar and things keep failing and need replaced yearly
Find some stainless collars as the ones from JBR rust. Mine are nastly after 2 years. Mind you, mine where black oxide, the ones you have there, what material are they?
@@ColtonRichter Sorry, I'm talking about the 2 piece shaft collars that wrap around the sway bar. I do have the aluminum billet mounts and they are ok. I might pick up some stainless collars, I just don't feel like changing the ones on the front sway bar though, ewwww. Oh, if you do the front sway bar, when dropping the sub frame, take the extra 10 minutes to take the bolts out of the steering rack, that will take the stress off the steering shaft and drop the sub frame about 2 more inches, which makes it a piece of cake to take out the old bar and put in the new one. Also, get a 90 degree grease fitting for the drivers side.
BC Racing Coilovers. Depends what you're after, if you like an OEM ride style then lowering spring is your answer. Coilovers are for a bit more advanced users, some offering adjustable damping but going to a super stiff ride compared to stock setup.
Hey mate i know this is an old video . but im struggling to find out if the mazda 3 bk/bl mps rear sway bar will fit into my mazda 3 gen1 bk 2008 could you link the one you used ? if stock rear sway bar thickness is 22mm i want a lot thicker than that to go with my bc v1's coilovers
Man, what a great video. Dude I've been Dying to Change the front Swaybar bushings, any advice? I heard there's a way without removing the whole subframe/Crossmember. :[ Too much clunk
Yeah, could get new one in without complete removal but it's a bitch and it's not that much of an improvement. Do the rear. Lots easier and more effect. New ones were noisier than the old ones.
Good vid, I’m sure I can speak for others I cannot find a Mazda 3 build channel... Just picked up a 08 Mazda 3 sedan in mica black... Looking forwards to your channel growing With all the mazda builds.
Same car i have, leather interior?
Thanks you! Hope you enjoy your 3 🙂
Brady Huselton no that would be niccee mines got cloth with tiny 15 inch Wheels, I’m looking for a parts car in my area maybe seats and some odds and ends.
Also look at ruclips.net/video/eTctHtB8-Fs/видео.html
This is something I'm interested in doing with my 2017 Mazda3. Thanks for the great lighting and camera work as you did the replacement.
Worth it, good luck!
I changed front and rear in my BN mazda 3 to Eibach sway bars, and its huge difference. Well worth it !
Agreed :)
When you did the fronts, you had to drop the subframe?
@@kwbalance108 pretty sure they had to
Another awesome video bro! I’m doing the front and rear sway bars in Mazda 3 ( whiteline high performance ) and this helped heeeepppss !!
Much love your Aussie bro!
Same suspension as a lot of Fords. I've just installed a 27mm Mazda rear bar on my 2014 C-Max.
Hahaha nice
Cool video, just want to note that you can’t use your phone to measure angle while you are cornering because it uses an accelerometer to detect angle. The lateral G forces will throw off the measurement.
Good to know, just thought i'd try and use it for judgement 😂
What the actual heck, lol. I had some parts in my rear suspension changed because they were too old, and I've felt the rear swaying over bumps ever since. I thought the mechanic was at fault, but it seems like it's just how this suspension setup works.
I want to start a yt ab my mazda 3 but youve done so many videos on it i feel like i would just be copying :'( but good shit with the content bro helps out a ton
There's no such thing as copying when it comes to content, do what you desire :)
I would love to see that! I'll subsscribe if you ever start posting videos :)
@@Caquin1950 forsure 💯 I might do it my build is very unique
@@S8.n Okay now I am extremely curious and really, really want to see it! Please consider making one, this car is just so awesome
Nice for the advice, my back end was seriously getting on my you know what..
I noticed these Mazda, have an untrusted back end anyway, can flip out, so must try this if I keep my 3 any longer.. Bless
It's a great mod, I've loved it since day one.
PLEASE UPLOAD MORE VIDEOS ON THE MAZDA 3 PLZZZZzzzz
Will do!
Upvote: This is exactly like my 2008 MS3 that I did this afternoon. Didn't need a breaker bar on anything. Just a palm-heel strike or two. And this was despite 5 years of Connecticut winters. Not true that "everything is 14". The end link nuts were 17 mm. You should have lifted by the lower control arms. Otherwise the sway bar hits the suspension and cannot be fitted in properly.
MS3 end links are beefier then the MZ3's resulting in different nut sizes, just so we know.
@@ColtonRichter Good to know. They did look a bit different than yours but I thought it might be a year difference.
I know I need to but jeez I'm worried about inspecting under my Mazda, I need to get some jack stands so I can do it safely at my place, I've got a feeling the way I plan to drive I should do this also, but as mentioned earlier I really need to figure out how they've messed with the exhaust system.
Good job. now do the front sway bar...
Too much work... 😅
Dónde se puede encontrar esa
Barra estabilizadora ?
more mazda 3 upgrades
Of course 😉
Do you have a video on the replacement of the front sway bar. I just lowered my Mazda 3 sedan and discovered my front sway bar bolt holes are pretty worn and way bigger then they should be. Gonna try to replace myself if it’s possible.
Front sway bar have to drop the front subframe.
@@ColtonRichter dang that sounds out of my wheel house. I guess I’ll let that for the garage. How much you think that affects steering and suspension components? I’ve had the car 5 years and replaced almost everything under the front end except cv axles and that front sway bar and things keep failing and need replaced yearly
It won't wear anything down anymore, maybe besides sway bar links which are cheap to replace anyway.
@@ColtonRichter thanks man, appreciate the replies.
how can i order that kind of swaybar?
Hey when you jacked up the rear where did you place the jack?
I normally lift the ass from the charcoal cannister cover
Find some stainless collars as the ones from JBR rust. Mine are nastly after 2 years. Mind you, mine where black oxide, the ones you have there, what material are they?
You might've gotten the Billet brackets, I believe these are stainless
@@ColtonRichter Sorry, I'm talking about the 2 piece shaft collars that wrap around the sway bar. I do have the aluminum billet mounts and they are ok. I might pick up some stainless collars, I just don't feel like changing the ones on the front sway bar though, ewwww.
Oh, if you do the front sway bar, when dropping the sub frame, take the extra 10 minutes to take the bolts out of the steering rack, that will take the stress off the steering shaft and drop the sub frame about 2 more inches, which makes it a piece of cake to take out the old bar and put in the new one. Also, get a 90 degree grease fitting for the drivers side.
Ah yes, they'll rust. It's just cheap metal to hold it in place
What type of coil overs do you run and are they better than the stock coil over shock set up..?? Thank you...
BC Racing Coilovers. Depends what you're after, if you like an OEM ride style then lowering spring is your answer. Coilovers are for a bit more advanced users, some offering adjustable damping but going to a super stiff ride compared to stock setup.
Hey mate i know this is an old video . but im struggling to find out if the mazda 3 bk/bl mps rear sway bar will fit into my mazda 3 gen1 bk 2008 could you link the one you used ? if stock rear sway bar thickness is 22mm i want a lot thicker than that to go with my bc v1's coilovers
Yes the MPS sway bar will fit.
Exhaust sound? What have you done
CorkSport Catback
Where'd you get the red for the door cards?
ruclips.net/video/yTllbRgDoOc/видео.html
Man, what a great video. Dude I've been Dying to Change the front Swaybar bushings, any advice? I heard there's a way without removing the whole subframe/Crossmember. :[ Too much clunk
I heard about the subframe removal too... not down 😂
Yeah, could get new one in without complete removal but it's a bitch and it's not that much of an improvement. Do the rear. Lots easier and more effect. New ones were noisier than the old ones.
So who is the local fella to get this sway bar from? Is he located in the lower mainland?
Contact me on IG!
Would it work for Mazda 3 hatch?
Yeah
👍🏻
Dude are you in Langley BC??
I used to be haha
c - WHERE'D YOU GET THE BAR?
Local guy fabbed it for him.
Где купить? Фирма производителя или каталожный номер, если есть заднего стаба?
CarID.com
Where can I get the exact same sway bar?
You can't, it's custom fabbed.