thank you, I was having trouble with this as my profile wasn't touching the body! Im learning Catia from scratch with only online tutorials so this was a great help :)
Hi Alex, Thank you for your comment. Now coming to your doubt, For a stiffener to work, There should be only one opening for the profile you create, and the open end points of the profile should be coincident with the closing surfaces of the corresponding part. Go through the video again and keep this point in mind. Get back to me soon with the result. All the best.
Hi Nitesh, The video on coupling is already available in my channel, Please take a closer look..!! I will include the link to the video under the description above for your convenience. Thank You
Hi Anto, Surely I will upload more videos, Let me know for which topic you need the videos, If it doesn't exist in my uploads already, I will surely create and upload it. Best Regards.
Wait... You can still use the Pad command. Just make the sketch higher so it intersects with the cylinder... Anyway, thanks for the explanation. I couldn't figure it out by trial and error :)
In the L-plate with the cylinder...I think one end point of the stiffener you have taken slightly inside the end of the cylinder.... Can we do the same by clicking one end point exactly at the end of the cylinder?
thanks for the video. I am doing the same thing that you did in the video but it doesn't work. the two open parts of the stiffener line was created using the 3D project and then removed the projected parts. when I try to run the command it says: topological operators: invalid profile body. what am I missing in this? Thank you in advance for the reply.
+Farid Tavakkolmoghaddam dear Farid, if you get such error, it means you have some overlapping sketch entities. In case of stiffener, make sure that the stiffener line touches the face of both the supports. Hope that answers your question.
I have draw gear but I I tried pad option something went coming on dialogue box that like this at the sketch contents several open profiles are some geometry user for constants and you must specify the question geometry to solve the profile ambiguity
This is happening as your profile must be open and you are trying to do a feature like pad. Inorder to create a solid feature from the part workbench, your profile must be closed. Let me know if you still have doubts.
Can't get this to work. I did EXACTLY as you showed in the video and I get "Feature Definition Error: The selected sketch contains several open profiles or some geometry used for construction. You must specify the construction geometry to solve the profile ambiguity." I didn't use construction lines or anything like that. I even tried it on new Parts to see if my model was the issue but evidently it is not. Please help? Thanks.
Thank u for this video i want you that clearly every module with a each command and how to use that command for all catia V5 R20 please provide me that videos thank u again
thank you, I was having trouble with this as my profile wasn't touching the body! Im learning Catia from scratch with only online tutorials so this was a great help :)
Hi Alex,
Thank you for your comment.
Now coming to your doubt, For a stiffener to work, There should be only one opening for the profile you create, and the open end points of the profile should be coincident with the closing surfaces of the corresponding part.
Go through the video again and keep this point in mind.
Get back to me soon with the result.
All the best.
You are welcome Ashish..!!
Keep watching..!!
Hi Nitesh,
The video on coupling is already available in my channel, Please take a closer look..!!
I will include the link to the video under the description above for your convenience.
Thank You
Thank you so much , I just did my part of this command ( so useful tutorial )
Wolkan Toros You are welcome..!!Please share in your wall and among your friends..!!
well... in the case of the cylinder one can make the tilted line of the sketch for the pad go a big higher and the pad will cover everything
Good to know my tutorials are helping you..!!
Subscribe me and get notified in your inbox every time I upload new tutorials..!!
Enjoy..!!
Hi Anto,
Surely I will upload more videos, Let me know for which topic you need the videos, If it doesn't exist in my uploads already, I will surely create and upload it.
Best Regards.
teşekkürler..!! Allah bu hayatta ve cennette mutluluk ve refah ile hepimiz korusun
Wait... You can still use the Pad command. Just make the sketch higher so it intersects with the cylinder...
Anyway, thanks for the explanation. I couldn't figure it out by trial and error :)
Nice Video
My doubt clear , thank u bro (pad and stiff)
Hi Kowndinya,
Please watch the video.
Thank You.
really helpful videos thanks..
In the L-plate with the cylinder...I think one end point of the stiffener you have taken slightly inside the end of the cylinder....
Can we do the same by clicking one end point exactly at the end of the cylinder?
Thank you! Really useful :)
Amazing tutorials :D
Hi....Thank you Very Much. I am beginner for Catia......Can u Upload some more videos for basic......
Hi, may I know how to deal with the isolated line. Because I face this problem when I was proceed after done the 2D sketch.
Hello, you need a closed loop to perform solid operations such as PAD. Check your sketch. Or there is an option to inspect sketch.
Very Useful...
thanks you sir your tutorials was osm
#Theengineerbaba
thank from Spain
Hello Javier,
Stay tuned for more videos. Where are you working and which domain?
thanks for the video. I am doing the same thing that you did in the video but it doesn't work. the two open parts of the stiffener line was created using the 3D project and then removed the projected parts. when I try to run the command it says: topological operators: invalid profile body. what am I missing in this? Thank you in advance for the reply.
+Farid Tavakkolmoghaddam dear Farid, if you get such error, it means you have some overlapping sketch entities. In case of stiffener, make sure that the stiffener line touches the face of both the supports. Hope that answers your question.
Mohammed Shakeel
Guruji thanks for the knowledge
Nice work :)
I have draw gear but I I tried pad option something went coming on dialogue box that like this at the sketch contents several open profiles are some geometry user for constants and you must specify the question geometry to solve the profile ambiguity
Please tell me sir I trying number of times bu but error is coming
This is happening as your profile must be open and you are trying to do a feature like pad. Inorder to create a solid feature from the part workbench, your profile must be closed. Let me know if you still have doubts.
Thank you Sir.
can you upload video on coupling in multi-section solid defination.
quick and simple !
Can't get this to work. I did EXACTLY as you showed in the video and I get "Feature Definition Error: The selected sketch contains several open profiles or some geometry used for construction. You must specify the construction geometry to solve the profile ambiguity." I didn't use construction lines or anything like that. I even tried it on new Parts to see if my model was the issue but evidently it is not. Please help? Thanks.
Nice video
there is no hatching for stiffner in when we draw cut section.
Then why catia show hatching for stiffner in catia drafting???
Thank You..!!
JazakAllah, Thank you for your notice.
Assalamu alaikum Varahmatullahivabarakathu
ALLAH senden razı olsun.
thank you sir....
thank you for yourshare.
nic
But sir the distance from baseline to angle line
vidio is not clear please sir aap achchhe se video banaya kuch samj me nahi aa rha h ki kaun sa button ka use kar rhe h aap
Hey... Its showing topological operator : invalid porfile body.
What to do??
same here
thanks bro.
Hello Sir,,,Your Videos are Good,,I Need Auto Cad Software,,,From Where i can download it ?
Gratitude..!!..my pleasure..!!
I think you can download a student version from Autodesk.
Hi Friend,
I'm sorry for the late reply.
Sure, its catia.pro.user@gmail.com.
Thank you for writing to me.
Small problem sir can you please respond
Yes sir?
If you don't mind give me your WhatsApp number I will show you my problem by picture
Thank u for this video i want you that clearly every module with a each command and how to use that command for all catia V5 R20
please provide me that videos thank u again
Assalaamualikum
this vedio would be wonderful if it had a good Sound,
you are not audible clearly.
This is a fack