Cheap ArduPilot Telemetry on OpenTX Radios Using Yaapu LUA Script
HTML-код
- Опубликовано: 28 авг 2024
- Useful links:
ardupilot.org/c...
ardupilot.org/c...
github.com/yaa...
discuss.ardupi...
Useful links for the general series:
This series - • ArduPilot on Omnibus F...
www.unmannedte...
ardupilot.org/c...
firmware.ardupi...
• Using Zadig to flash y...
You can see more R/C related videos on the channel - / painless360
Looking for a video on a specific topic? All of my videos are arranged into easy to use playlists and have lots of text tags on them too for easy searching.
If this video was helpful or you liked the content then please consider subscribing and supporting the channel by visiting / painless360
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit.
You can follow me on social media too. Look for the 'Painless360' name - / painless360 and Instagram as well.
Thanks for watching, please LIKE and SUBSCRIBE and Happy Flying!
![☀ GoogleMaps на OpenTX. Невозможное возможно? [Yaapu Mapping]](http://i.ytimg.com/vi/kmYHv3bFg_4/mqdefault.jpg)
Hello, thank you for this video. Impressive what can be done. I am using a Matek F765-Wing with X8R receiver and Jumper T16 transmitter. It took me some time but I figured it out with a lot of google and forums. On the F765-Wing there is no need for the external circuit, the Smart Port data cable plugs on Tx7 on the F765-Wing which is SERIAL1 in Arduplane. The settings that work without the need of the external circuit are SERIAL1_BAUD = 57; SERIAL1_OPTIONS = 7; SERIAL1_PROTOCOL = 10. With that it worked straight away. From what I read this is not a common feature on FCs yet to be able to set half-duplex and inverted TX and RX. Thank you for your videos !!!! Its a great help for someone that just starts in the RC world.
I have spent most of the day trying to work out what you have written in this comment. Thank you thank you thank you!
This gave me an hour or two (or maybe 3) of runarounds, on my Omnibus F4 Pro telemetry is on Serial 2!!! But a big thanks for this video Lee, have been meaning to add this to a model for ages, have always relied upon the osd before. but i love the way this allows the f/c to announce what mode it is in. Had a few instances in the past where my Taranis announced that i had set the switch to a certain mode, only to find that the flight controller had not done it for some reason. A few times in the past i have switched to loiter - thinking my craft was happily hovering stationary waiting for me, only to watch it drift away still in Stabilize! Easily done if your not paying attention to the osd. So yes, i love the way with this it is the actual f/c dictating what message is played.
Thanks Lee, this is a much more up to date, and cheaper way to achieve this compared to the older method I used with an APM 2.6 fc linked to a $30 teensy board running Athertop firmware to send telemetry back to the radio Rx. I also needed a $10 minim osd board as well. The setup you are describing in this series is a much neater way of providing the same info. the Tx screen info is helpful, but even with the FPV goggles on it helps when your radio Tx voice tells you when you've reached "max height", " 500m distance", etc. Thanks again.
I do prefer inav lua scrip, because show the gps coordinates and if the plane crash I know where it is. Love the video LEE.
Thank you so much for this series of videos. I haven't been able to follow them closely this time. But I know for sure these will be my goto videos when I start my next project.
Just ordered the parts! Looking forward for a flashy telemetry screen for my Taranis 😁
Great video! Keep up the awesome work! I would love to see how this is set up in Inav. Thanks!!
Yes! We all want to know that sorcery under Inav too!
Thx Lee, really useful, especially the removal of the ground wire to the Rx, this I was unsure about.
if you get issues then add the GND wire back in. There is a common GND back via the Rx so it should work.. Happy flying!
Please do a video to show this with I-nav. Thanks for all your great work.....
The cool Yaapu telemetry script requires the flight controller firmware to support the FrSky passthrough protocol (as mentioned in this video) in order to feed it to the ground over a s.port connection. This is supported in Ardupilot, but not certain that this is available in iNav. There is a separate project which uses a Teensy micro controller to convert Mavlink telemetry into FrSky Passthrough (found here: www.rcgroups.com/forums/showthread.php?3089648-Mavlink-To-FrSky-Passthrough-Converter) which can be used on flight controllers which can provide full Mavlink v1 (or v2) telemetry (which have no FrSky passthrough option natively - such as pixhawk running px4), but again not sure if iNav can be configured to send Mavlink (at least not full mavlink streams containing all the sensor info needed by the aforementioned project).
A link to the omnibus board please. Tutorial in inav please😎
The nice thing about using the later F7 flight controllers rather than a F4 is that UARTs can be inverted in software and so no need to have the hardware inverter.
Great option, but, How do u use software inversion on mission planner? And is it possible to use softserial? Thnx
Hello painless being watching your contact for years, thanks alot for what you did to me without your knowing. I feel I'm related with you cause for years seeing you
Great video. I have been following your series and have installed into a plane and just wondering how I could interface the telemetry to the FC. This is just what I wanted so I can see what is going on in Ardupilot on my Taranis. Keep up the good work, and yes please for Inav.
Great video, btw. I've been reluctant to give Ardupilot a go and your videos sure are inspiring.
Definately would love to see this in iNav
After watching all your Ardupilot videos, I've been inspired to try it myself and in the process found out that you can now use the yaapu script without any extra hardware. If you're willing to do the uninvert hack on your smart port port output for your receiver and if you're willing to use the latest 3.10 nightly build, there's an option called SERIALx_OPTIONS which will allow you to configure a serial port to handle the half duplex uninverted signal directly. The settings are at the bottom of this page www.mateksys.com/?portfolio=f405-wing#tab-id-6 for setting up ordinary smart port telemetry - or if you want pass-thru telemetry for use with the yaapu script, you just need to change SERIALx_PROTOCOL from 4 to 10.
Excellent video [as usual]. Keep up the good work.
That's fantastic, Lee! And really useful! 😃
Thanks a lot!!!
Found it. Thanks ! Electronics not a issue being a 'Ham'.
Just thinking of pushing the button on getting started in everything - pending SHMBO ...
Jumper T16 + 2S Li-po with R1 D16 compatible RX (fooled me for ages that it's really a transceiver!)
F450 flame wheel frame
Emax MT2213 + 10-4.5 props
Chaos 25A ESC's
4AH 3S Li-Po + 400W M8S charger
RadioLink GPS M8N
Pixracer FC - from China ?
Best of luck with the build! :D
Been using for a couple years I like getting confirmation all is well before launch without a computer and being able to record the telemetry data to the transmitter sd card. You may want to look at the sailplane/glider thermal hunter mode included in the latest ardupilot plane version.
Pitot planned for future build. See previous reply... Happy flying!
@@Painless360 Forgot to mention been testing the overheat problem with the telemetry adapter appears it may be caused by not having the correct protocol selected/saved/rebooted prior to hookup.
This looks fantastic, thanks for sharing this :)
Excellent as usual.
Great series! You probably mentioned it somewhere, but my almost 80 year old brain has developed quite a few bad sectors lately :( and I just can't remember. Are you using SBUS or PPM into the Omnibus?
Defrag, low level brain format? :D :D It's SBUS on this build but the pads need to be soldered as shown in the series for it to work.. Best of luck!
Hello, can you do a video on the new version rsxr and getting telemetry from pixhawk please? I see it has the inverter s-bus and s-port and not quite sure how it hooks up.
Thank you so very much!
Any way to use the widgets if you already have telemetry via crossfire Mavlink?
Really, that's great and thanks for the informative video, yes please, I would like to see this implemented in INAV and maybe you would also answer if this can be done using Furious FPV f35 lightning controller.
I may look to use the F35 in my Orbit for the iNav video.. Stay tuned!
I love see video for Inav😉 for FRSKY D4R II RX
Just curious if the extra hardware is needed. I am using an RSXR Receiver that is already connected to my Taranis x9D+ with SBUS to my Matek H743 Board. Could I just connect the Smart Port wire to the TX6 on the board?
yes inav please with crossfire
second that.... would be great.... thanks
Hoping you'll be providing some new content for iNav.
Like what? Thslatest iNav 2.1 series where the installed it on three planes only just finished.. check it out!
I’m running an APM 2.8 with ArduCopter, and I’d like to get the same telemetry through my Taranis x9d+. I’ve got it working on a newer pixhawk, but not with the ArduCopter. Wondering if you’d have any insight.
Thanks for the info and video!
Would it be possible to do a telemetry video on the Jumper T16? I like the idea of having the telemetry on the radio as well as via FPV.
Thanks!
Yes it is - check out the videos in the T16 series..
this program is amazing however some boards have to have the signal inverted
Is there a way to get telemetry from the radio onto the GC mission planner laptop without adding additional transmitters and receivers . I read 1 article where they used the wi-fi feature of crossfire transmitter module to pass crossfire telemetry to GC .
Lee, if using the frsky r9m and r9mm receiver that has the inverted s.port pin (inverted of the inverted therefore noninverted..) would you be able to use the telemetry that way without the board.. Obviously without using the yappu script?
Not sure, I dont use the R9m.. best of luck!
I am using r9mm as well and still cant figure it out. :(
Great Video,, how about using CSRF protcol?
Hi Lee, I noticed that when you used MP to set the telemetry protocol used, you picked option 10 "Frsky SPort Passthrough (OpenTX)". I also noticed that option 4 "Frsky SPort" was available. What's the difference? cheers ...
The pass through setting includes ardupilot specific data like flight modes - www.armattanquads.com/painless-tutorials/ covers it nicely..
When i connect it ,in every 2 second it gives telemetry lost warning,
I love the idea of this yaapu script but can it work with crossfire setup using nano receiver ?
Or will it only work for Frsky receivers ?
See my series with Arduplane, Crossfire and an AR wing from last summer. I used this there and it worked fine.. Happy flying
Would it work with the x12s or x10 frsky radios?
Painless...on a Pixhawk, yes, a person needs a "translator" cable that takes arducopter telemetry coming off the "telem 1" port on the Pixhawk (telem 2, and telem 4/5 also work), but on my Kakute F7, (and I'm thinking all the other F4/F7 boards?), THERE IS NO NEED FOR A CABLE. In my setup, I simply connected a wire straight from a UART port on the Kakute (I think I'm using UART/SERIAL 3) to the SPORT pin on the receiver. The other thing is you do not have to "discover sensors" unless you want to show the telemetry data outside of the yaapu script (on other pages)...if you are strictly using the yaapu script for all your telemetry, "discover sensors" is not necessary (though it doesn't hurt anything, so there's no harm in doing so).
Things like telemetry are very board specific as smartport is inverted - That's all covered in the documentation. Happy flying!
@@Painless360 Thanks for the quick reply. Which documentation are you referring to? The yaapu docs? And those docs say which boards need translator cables and which do not? Thanks. (So sorry if you covered that in the video, I must have missed it.)
Have a Taranis plus, but while updating the firmware it seems it doesn't give me the option to tick both Lua and Luac options. It only has the one. Is there a way to change this for both options?
In the later versions I think LUA is there by default. Check the release notes... Best of luck!
I'm trying it with an older a R9 Slim non-plus but no luck so far. For me, the sensors are discovered but I never get any data from them. The converter board gets warm but not hot, so I guess it works. I wonder what could be the reason? Otherwise I might just get another R9 Slim+ which has uninverted SBUS out and worked perfectly on my last build.
Not sure, I don't use R9M here...
Hi do I need a FRSKY radio to use this playlist as I only have a FLYSKY FS-I6 radio at the moment so will I need to upgrade to be able to use this in my aircraft sorry if its a silly question but I am a complete beginner to RC
Obviously yes.. But if you have an fpv setup, this setup on radio can just be your backup
Ok so please excuse my ignorance but is it possible to use this method to pass telemetry through the radio and into a laptop running mission planner? I was going to use a separate telemetry USB module on my first ardupilot plane to achieve this but it seems to me if all of this can be transmitted through the s.port then it would be much more convenient to just plug the radio into a laptop and control the planes flight plan via mission planner... if im missing something here PLEASE let me know lol this is the last thing i want to get working before it goes up for the maiden. Thanks for the video painless360!!
I have done this with my frsky taranis Lua and Inav, it saves having the FPV screen cluttered up with instrumentation.
Hello, what rx do you have ? What is your settings in inav ? Do you plug in an uart like rx1 and tx1 ? Or on a serial port?
Best regards.
Could the Yaapu LUA be run with Crossfire or DragonLink?
I've tried on 2 such converter boards and connected the same way to my Pixhack... Using the smartport on my XSR receiver and Taranis QX7 radio, it just didn't work out for me... Help!
What troubleshooting have you already tried?
does this mean we can use the telemetry link on the rxsr receivers and taranis to use the mision planner? (i.e. with using and extra telemetry trans/ceiver kit?)...wifi a fone or pad to the taranis maybe?
typo in brackets there sy..''without'' using a seperate telemetry kit
Hey, do you know how to connect a Pixhawk with esp32 lora/stm32 lora like a telemetry?
Until I've tried it here all I've used are the regular telemetry radios.. I can help with those...
I've been trying to get telemetry to work with the Matek F405 and the RXSR with no luck. I've tried the uninverted SPort pad directly to serials 1, 6 to no avail and even built the cable per your instructions and tried serial 1, 6, 5 and also not getting anywhere. Can you offer any help? Thanks!
All I did to get it working is in the video. There are reports of those TTL boards being prone to failure and overheating.. I'd try another..
@@Painless360 thanks Lee. I tried 3 cables, as I had to buiy a minimum of 5. I even emailed Matek tech support and they sent me a link to the product page, tab 6 which talks about setting up telemetry, but they ask me to setup 3 Params for the serial port, protocol, baud and option. I don't see a SERIAL6_OPTION, which I'm supposed to set to 7 to make it work...
Hi , is possible conect a bluetooth in r9m sport and conect to note or cel? Tks !
I've not tried but others channels have done videos on it... best of luck!
I assumed you could do this already with telemetry from the flight controller (arducopter) to the receiver (X4R) ?
- I'm a very long time occasional watcher
What you can do is changing all the time. Not all modern protocols we use in the hobby are supported by Ardupilot... Happy flying
Is the hardware mod needed if I'm using a R9 mini RX? I have the RC control working using SBUS on my matek 765. I'd like to get telemetry. Tried without the cable. Connected UART TX4 to S.port/F.port on my RX and still nothing.
No idea, I don't use R9m here.. Best of luck!
@@Painless360 No worries. Would be using crossfire if I hadn't gotten the R9 setup for free.
I cannot get this to work at all. I have the script on my Taranis X9 lite, I have the cable that I purchased, I'm using an R-XSR with smart port, and I've seen other people with this runnig on the same hardware I have. I've got it configured exactly how it's supposed to be, but I only get the 3 sensors from the receiver. I've deleted them and searched for more, I've made sure I'm configured correctly, I even updated the firmware of all of my hardware to the latest from last week, downloaded and installed it all again, and still nothing. Even switched around the two wires to see if I was backwards and still get nothing. It's become incredily frustrating, and I would give up if I didn't know it worked with my hardware.
Any advice?
*I'm using a MATEK H743 WLITE fc
I've found that I was configuring the wrong serial port usually.. I'd try the others and recheck the docs for that flight controller.. Best of luck!
I still can't get this to work. :( 😭😭😭
Already tried swapping tx/rx, new 232-ttl board, etc.
I can’t get this to work on the X9-lite. Keeps giving me script syntax error
I'd check things like the the OpenTX version and the list of pre-requisites for Yaapu.. Best of luck!
Hi, I'd like to see a tutorial in Inav plaese. I've ordered a Matek F722 wing FC to put in a Phoenix 2400 unfortunatly it doesn't support ardupilot, do you know if it will ever support it like the F405 wing does ? Sorry for my strange english I'm from France, baguette.
Le meilleur endroit à regarder est dans les pages du wiki Ardupilot car il s’agit d’un delevopment en direct et les choses changent tout le temps. C'est pourquoi j'ai expliqué comment vérifier les bases supportées au début de ma dernière version d'Ardupilot. Bonne chance!
@@Painless360 Merci beaucoup :)
THX for your video!
Only got 1 problem:
Got telemetry working original FrSky pages. But the Yaapu script says: "no telemetry data"
I'd delete all of the sensors and re discover them... Best of luck
@@Painless360 THX, but still nothing. FrSky data working just fine...
Then it's not the radio, it's how you've setup everything on the FC... Telemetry on, Port setup etc.
If there only was a similar solution for the modest Flysky fs-i6. But I suppose one can't have it all. Maybe a groundstation consisting of MavLink + smartphone could be a solution.
Not that I'm aware of... If you find one, please let me know..
@@Painless360 Not that I know of. There have been attempts to make OpenTx run on Flysky FS-i6. Although there is some good custom firmware that opens up more channels and more, there is no OpenTx for this radio. Some people seem have to been able to make parts of the code to run. Others have used the FS-i6 for their arduino based OpenTx radio. This is interesting of course, but then we have the philosophical question, is it an FS-i6 radio anymore? Smartphone with MAVLink is not as lightweight, but a viable solution.
You can get basic telemetry from flight controllers onto flysky with a similar diode based connection, but only the values flysky pre-defined for their hardware sensors. And if I recall, it's only possible with the older receivers, not the newer x6b.
Also, the only attempt I know of for OpwnTX was on the i6x, which has a completely different CPU.
Painless how would I get this telemetry converter to work if my RX is a Crossfire Nano and my TX is a Crossfire Micro on a QX7?
The micro doesn't have the Bluetooth connection. Apart from that I believe they are very similar.
Painless360 I’m not understanding. I see that the pixhawk will output several telemetry protocols. What telemetry protocol would I set the telemetry output port on the pixhawk to if I’m using the Yappu converter connected to a Crossfire Nano Receiver? Also, what pin on the Crossfire Nano would I hook the telemetry output of the Yappu telemetry converter to?
Stay tuned for the latest Arduplane build - I think I may be about to explore what you're after..
Hi! Thanks a lot for this great video. I can get everything working with a X8R receiver, but no luck with R-XSR and R9mm... (with latest firmwares). Any idea on why?
Different firmware maybe? Check if the R-XSR are using the same (LBT or not) firmware as the X8R..
@@Painless360 I use EU firmwares on all receivers... I will double check later. What receiver did you use in this video?
Ok, everything is working right now. The problem was that I plugged to the fc the usb cable, but not the battery. Thanks again for your time and your videos!!! 🙂🙂
Phew! Glad it's sorted! :D
Anyone that runs the lua script with dragonlink v3 slim and the matek f765. I have telemetry on the taranis. 11 sensors. But they wont show up in the yaapu script. It tells me there is no telemetry.
So far I had removed sensors and found then again in more then 10 different combinations. No results.
Anyone?
I can't find the script (taranis_1.8.0_rc1) for Taranis Q 7x. Your link takes me to the web site but it doesn't look like whats on your video. Has things changed now and where do I find the download now?
No need to reply, I have it sorted. The file to download is, Taranis version 1.8.0 "Source code (zip)"
masha Allah, thank you brother, insha Allah will try this soon 😉
Hi - an this be done whilst keeping BetaFlight?
There are LUA scripts for Betaflight, github.com/betaflight/betaflight-tx-lua-scripts/releases I've not used them myself..
iNav please
I second that. 😊
Hey I had a quick question for you. I have a wing and the F405 board and I have the latest iNav and the GPS tab does not show a map plus the mission control tab does not load a map either and says at the top to use a stand alone mission control. I had ardu pilot mission planner loaded on my f405 but inav would not connect to my board so I started over and loaded the latest inav firmware back to my f405 and now it will not connect to ardupiot so how can I do missions?
Sounds like a bug in the inav configurator. I'd check the inav github. If you want anything but basic missions - you want Arduplane..
@@Painless360 If go with arduplane then that means I won't be able to connect to iNav anymore to set up modes and stuff because iNav won't connect after I put ardu firmware on the board.
That's right. It's one or the other.. see my series on both.
@@Painless360 Thanks alot buddy! Glad that I found you. You have very good videos!
Have you tried using this on the same radio as Flightdeck? I might want to try both.
I have both on this radio...
@@Painless360 I ended up removing FlightDeck. Yaapu is more powerful, and I never used FlightDeck once Yaapu was released.
honestly... I don't watch the display of my radio after I've selected the drone I will fly with. (though this screen looking great) 👍
Wait until its the only thing you CAN see, then you'll find out why it's handy ";)
I am trying to make a taranis x7/ ardupilot/flightdeck telemetry setup with FC kakute f7 aio and frsky xsr . Using seriel_4 tx. I have read (ardupilot.org) that it should be possible to do this without a ,speciel cable, like you are doing in this video, just connecting S.port to seriel_4 Tx. The problem is it does not work.. you have to setup seriel_4 options=7, but this parameter is not in the parameter list... (only BAUD and protocol)
I only have used this method to date and it works great...
@@Painless360 Thank you for answer and all your fine videos, which have helped me much
with my copter build...
I have an update to the problem with the inverted and not inverted seriel connections.
I have tried to install a beta version of the firmware (from inside mission planner) vers. 4.0.0.
This version has this serial4-options parameter and it is possible to set it.
I have just connected Tx4 (kakute f7) with smart-port on FRsky-Xsr.
Now it works, telemetry on taranis q x7...
Such a signal problem (inverted not inverted) with the uarts in the flight contrller does not make things easyer...
Hi, thank you so much for the video I got it to work.
But I seem to have a problem with RS232 heating up if I plug in the USB cable to the FC at the same time, I was wondering does anyone knows why?
RS232 heating up? I'm not sure what part of the model you are talking about?
@@Painless360, sorry for not being clear. I meant the little piece of hardware you made in the video that connects receiver to FC.
If you mean the TTL board then I've not seen that here.. I hope you get it sorted. Best of luck!
I have the same problem. The chip was getting real hot.. Not sure if its need 3.3v to work.
Hi ! Thanks a lot for your videos !
I'm using a caipirinha with crossefire nano diversity and f765 wing on inav. After installing rs232 with diode on a tx1 and rx1 I don't have telemetry data in yapuu on my x9d. Can u help me please?
Best regards
I think the last time I did that was on the Arduplane/Matek/ARWing build.. I'd have a look at that series... best of luck
@@Painless360 ok. There is no sPort on rx crossfire but I can choose a chanel and put it in sbus, n.i.sbus, mavlink, smartaudio... do you have an idea ? I try in sbus and mavlink and set smartport on uart1 in inav port configuration but nothing in yapuu telemetry...
You avoid to deal with the "inversion problem" going back to the diy cable solution...
I dont understand your comment.
@@Painless360 with the 3.10 version of ardupilot there's a way to do as you would do it with betaflight, connect the sport directly to a uart. The 3.10 is a dev tag version, so this is not as well documented as the standard cube method. github.com/ArduPilot/ardupilot/issues/9267
Hi Lee,
been watching your taranis videos and wonder if you might give me sum help,
I have been using my x9d+ for 2 yrs and all was well until i flashed a xsr from the taranis
with new firmware and flashed it to the internal module by mistake and now it will not bind to
any rx at all, I did a factory reset and have all the new resent firmware downloaded everything
looks and sounds fine (chirps) but wont bind, Been trying for days now ! have i bricked something
on the board ? hope you can help,
I'd try to flash the internal module with the correct xjt firmware. I hope its ok.. best of luck!
@@Painless360 many thanks for your time
to reply,will try that today not given in to buying a new one yet and i dont mind rebinding all my models,Thanks again.
@@Painless360 all working now i just wished i had asked for help 3 days ago ! now i am in love with the t16 jumper ( christmas soon) now its a 12 + models to keep me busy re-bind/flashing (not pervy kink)
thanks again Lee.
Please show this for INAV
Already done. Check out the iNAV for beginners 2020 series.. Happy flying
-luac checkbox is not available in Companion 2.3.5 any ideas?
The answer is in the release notes for OpenTX Companion - "Multimodule, Crossfire and luac options are included by default in all firmware". Happy flying!
@@Painless360 Wow Lee that was fast! Cheers!
@@Painless360 and something else, I noticed that you use the non eu(lbt) (checkbox wasnt ticked) opentxfirmware and assume that fcc is used for the xj and receiver. Is this a Brexit thing :D or it is actually better in any way to fly the fcc firmware in Europe? Lbt on paper looks better, can one firmware be better than the other regardless of location?
What you have selected in OpenTX makes no difference to the protocol your radio uses. EU mode simply removes D8 and a few other things.. see my video on that. Happy flying!
@@Painless360 of course I have seen the video about it but it does not answer my question, if given the choice to have either fcc or lbt is there "betrer" protocol between them?
will crossfire mavlink telemetry pass through to the script??
That's something I've been trying to get to work.. Without any success..
@@Painless360 Thanks mate
Did it works on D8R-XP receiver?
I've not tried but the documentation should cover that if it's possible.. Best of luck!
Is this s.port only or will it work with d.port i have the D8R-xp 😭
Only Smartport for this method. Check out the wiki as new features are being added all the time.. Happy flying
@@Painless360 i thought it might be, i guess i can still get some telemetry but it wont be displayed like it is on yaapu. I will upgrade the module and receiver and try it 👍
Can this works on Ibus telemetry? On inav?
I've not tried. Let me know if it works.. best of luck
Can you make this video for inav?
Already done.. Check out the iNav playlists..
Does this also work on APM2.8 ?
This is a feature on all of the currently supported platforms I've seen. APM hasn't been supported for a long time now.. Hope that helps..
Just curious as to where you get the rs232-ttl boards? I ordered several from eBay. The picture in the ad looked identical to yours, but the ones I received are different. The component placement on the back is different and they do not have the screen printed ttl and rs232 on them. (Its a shame I can't upload a picture) I tried several and none of them work. Also, they all get very hot. Do you (or anyone viewing this) have any experience with these boards?
EDIT:
Wouldn't you know... I just tried another board (Number 5) and it works fine. So far, 4 out of 5 have been bad!!!!
EDIT 2:
Now that one overheated and quit. 5 out of 5 bad......
I got mine from a UK seller on eBay..
Well done on getting this out further. It's not all that new btw ;-)
Great to hear you knew about it. Many pilots (including the one who messaged me) are not aware and can't find decent instructional videos showing how to get it working... Happy flying!
Panless is there a way you making tutorial on pixhawk vtol
I'm looking for a model to use, VTOL is something I'm interested in but I ideally wanted a vertical wing..
@@Painless360 hi painless can you plz give me the product link for the model you want
Thank you
Still not found one that will fit the bill...
show it for inav!!!!!!!!!!!!!!! i need it!!!
inav not support
can be used with Naza v2???
No idea. I don't use DJI stuff here..
@@Painless360 thank you ...god job and amazing video.