How to Replace Driveshaft Center Support Bearing 03-07 Cadillac CTS
HTML-код
- Опубликовано: 30 июн 2024
- Buy Now!
New Driveshaft Center Support Bearing from 1AAuto.com 1aau.to/ia/1ADSH01551
In this video, 1A Auto shows you how to remove, replace, and install the center driveshaft support bushing in an 03, 04, 05, 06, 07, 08 Cadillac CTS
🔧 List of tools used:
• Pry Bar 1aau.to/ohI/1AXAA00020
• 19mm Wrench 1aau.to/op8/1AXAA00010
• 10mm Socket 1aau.to/oXZ/1AXAA00017
• 13mm Socket 1aau.to/o65/1AXAA00015
• 15mm Socket 1aau.to/o65/1AXAA00015
• 17mm Socket 1aau.to/o65/1AXAA00015
• 18mm Socket 1aau.to/or9/1AXAA00043
• Bearing Puller
• Crimper
• Snap Ring Pliers
• Wire End Cutters
• Ratchet 1aau.to/oane/1AXAA00016
• Socket Extensions 1aau.to/o65/1AXAA00015
• Torque Wrench 1aau.to/ov3/1AXAA00044
• 3/4 Inch Wrench
• Bearing Grease
• Brake Parts Cleaner
• Liquid Thread Locker
• Marker / Writing Utensil
• Floor Jack 1aau.to/oum/1AXAA00068
• Hammer 1aau.to/omp/1AXAA00091
• Jack Stands 1aau.to/ouB/1AXAA00065
• Wire Brush 1aau.to/oeC/1AXAA00079
For More Info visit us at 1aau.to/h/bkp/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Hello there I have a 08 cadillac CTS 3.6 L auto and RwD I need that center bearing support do u have one and how much it's for my shop let me know as soon possibly
Really nice video. Helped me a ton. Quick note for anyone doing this on jack stands in the drive way. You do not need to remove 02 sensors nor do you have to remove the full exhaust. You can manage to disconnect the exhaust at the cats and remove the support to let the exhaust hang in the driveway while you work around the drive shaft to get it removed. It may make easier access in the long run but definitely not worth the hassle in my opinion. Thanks for the video!
Excellent video. At first I thought the commentary was over dubbed but the mechanic is actually speaking as he goes along. Superb description, flowing and prescise and not easy to do whilst you're focused on the task. Well done. Nice clear, well lit photography too.
+Hab Som Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Please remember to subscribe to our channel if you haven't already. Have a great day! www.1aauto.com
Just did mine, was a great help to me.Thanks!
Excellent video, the mechanic is very concise and knowledgeable about the terminology.
+David Nelson Thank you for kind words! Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
This procedure deals only with 07 and prior CTS, the 08 and newer use c/v joints on the shaft and are serviced differently ! I was no able to find procedure on utube for these cars, the common cure was a $1200 driveshaft ! I went to my parts supplier who found that Dorman supplies the hanger, part # 934-620, and replacement takes a little time, but not impossible ! Start with dropping the exhaust by removing all the rubber hangers at the mufflers and the tail pipes, letting the exhaust rest on the cross member, then remove heat shielding and mark a straight line starting at the differential and running the whole way down the shaft to the transmission flange ! Using a long extension and a torn bit, remove the bolts holding the shaft to the tranny, then the ones holding the shaft to the differential ! Remove the two hanger bearing Bolts and the the driveshaft, it might need a little pry to get it clear of the flange, and pull it straight out the back . Mount the shaft in a soft jaw vice and separate the two halves by removing the bolts holding the C/v joint together, a few light taps should separate it, you then remove the snap ring holding the C/V flange to the shaft and remove the flange ! The small boot clamp has to be removed and replaced ! The hanger bearing came right off with a light pry between the assy and the dust flange, the new one slid back on ( the new metal dust flange was too large, so I tightened it up a bit, wiped a bit of JB weld on it and tapped it on ) I regreased the C/v joint and reassembled the shaft and installed ! I am a certified mechanic with 40 years experience, but someone with mechanical skills and a home garage could do this !
Yup yup
Thank you sir. What were your symptoms?
I was wondering about this as 2008 is the start of the second generation CTS and quite a bit is different, like the third differential housing bushing location that often fails on 2007 and below, that has now been relocated to the rear of the differential resulting in a tripod mount arrangement that does a better job of distributing the anti-torque loads, not to mention it makes more sense than the previous design. I'm curious as to what your symptoms were. I have an 08 CTS rear wheel drive automatic. On firm acceleration from a stop I feel a firm bump beneath the car, and some times I get a vibration at cruise speed although not often since the car is not driven hard.
I don't hear any noise and the tire wear is dead even front and rear, to rule out suspension parts. I strongly suspect the carrier bearing and that the thump I feel is the shaft lifting up under load. I haven't had a look at it yet. I have the GM shop manuals for the car and saw pictures of the joint configuration used in place of the of the old style universal joint. That was also a good upgrade.
Thanks for the write up, for me the hardest part was the taking off old bearing. I ended up splitting it with a grinder and it came off. Asides from that, i need new exhaust flange bolts because mine were extremely rusty. Highly recommend buying them if your going to be doing this job. For what ever reason, my drive shaft didn't have a slot for a snap ring, and the old bearing had no snap ring either. This was on a 2008 CTS 3.6L with manual transmission.
I do recommend investing in a good quality torx for for the driveshaft to transmission coupling, an impact rated T45 will do you great there. I bent my normal one trying to loosen the bolts.
@@aaronj2141 I am in the middle of this job on 2011 CTS 3.6 RWD with a manual transmission. I am also having problems getting the old bearing off. It seems as though the manual transmission cars use a press fit bearing setup rather than a slip fit/C-clip setup. Hopefully I can get it off with a bearing separator. A hammer and punch didn't get me very far.
Another great vid, doing this on my '06 CTS now, no issues.
How did you get enough clearance under the car
I just bought 1 from ya. Thanks for all the great videos
Thanks for sharing this very well made and informative video!! 😊
+DaMon Edwards Thanks for checking us out! 1AAuto.com
Very good as always, He has very good videos and knowledge
Great video. Helped me do the job myself!!!!!!!!!
+Terrence Taylor Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Great thanks for your time doing this video.
+Mark Hanson Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/cadillac-cts-cts-v-sts-driveshaft-center-support-bearing/i/1adsh01551?RUclips&CTA+Comment&BJbOqTt95o
Really good thorough and high quality video.
What kind of brake cleaner do yall use to remove the old loctite though? It must be some magical stuff, I always have to use a pocket knife to try and chip it out of the threads if it's bad enough that I gotta clean it.
Whatta great video. Perfect... Thank you so much
+Moises Oliveira Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Great video. Im gonna use this when I replace my center support bearing on my 05 Cadillac Sts.
How did it go? I need to replace mine on my 05 sts, as well.
Thank you for your great video. At 10:00 what type of grease did you use to the journal for the bearing. It was a white color in a blue squeezable tube? Is it ok to use a multi-purpose red thick grease for wheel bearings instead? Thanks.
Would this procedure be the same for a 2005 Cadillac STS with the 3.6 v6?
Good video on how this is to be done properly. Thy.
+Bob Tomes Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
This is an awesome video with help me incredibly
+Luis Fuentes Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Did this car have a vibration or shutter under throttle thanks for the video
I love your channel... great how-to videos. You guys have taught me a lot especially on my 99 Tahoe
I just don't now how these videos always "look" so easy...... and in real life we spend hours doing what it seems you do in minutes.....ie...... the 02 sensors have been in for years...... and even with a breaker bar I can't get them to budge.....I'm just going to unclip them and let them hang instead of taking them out.
Quick question. What if the front piece of the shaft broke off the from end with the coupler completely shredded. And I wanted to fix myself but how do I go about making sure its balanced right or simply lined up correctly.
very well explain. Thank you
Would this be the same process for a 2012 CTS4 ?
Great video! 👍👍👍
Do you have a video showing how to change the differential rear bushing? Is the one that makes the car sound like BANG! when change gear to Drive position or change to low gear speed when driving.
Thanks a lot 😊
+Delallum We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
That sounds like it could be a trans mount too. These 3 things tend to all go together
Hello, a question, if I didn't mark the lines before removing it as I know how it goes because now my car when I go to 25 mph trembles
Where’s there any symptoms to let you know if bad other than by looking at it? I have an 06 CTS RWD and I’m having a vibration when accelerating. It’s either coming from the driveshaft area or the rear. Not really making any noises but it doesn’t vibrate when cruising at highway speeds only on moderate and hard acceleration
hello 1auto, is it the same process for 2005 cts-v v8 5.7L ?
looks different setup on ctsv ...any suggestion or recommendations would be appreciated. thanks in advance !
+Mon kan Is should be the same procedure on that vehicle. Here is a link to them on our website. Hope this helps you out. www.1aauto.com/cadillac-cts-cts-v-sts-driveshaft-center-support-bearing/i/1adsh01551?RUclips&CTA+Comment&BJbOqTt95o
Any videos on how to change the rear differential bushing on a 2005 Cadillac Sts 3.6
+galcan85 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
why would you remove the o2 sensors after you unplug them?
Not to damage or distort the sencers.
What was the point in removing the o2 sensors ?
Sir, I have my parts to repair my drive shaft. One question: What is the length, and diameter of the pipe, you used to drive the new assembly onto the shaft?
Walter Anderson I used 1 1/4 diameter and 8 1 ft in ln length
shouldn't you at least check that universal joint and Maby replace it while you're that far and maby that caused the bearing to fail, mine did and i am trying to find out how to replace it as its peened in, do you have another video on changing the universal joint?
Took it to shop to get done since I don't have space to work on it😭 now my rpms are staying at 1000 😤 car wasn't doing that before. What they do wrong?
very nicely done . i just did mine too on my 05 cts. One thing I might say is that you did not specify where the washers go. on the head of the bolt or on the nut side. I noticed the front has all of the washers on the bolt head side. I see in your video the rear diff side that you have some washers on both sides of the unit.
Please contact me back! How loud was your clunk right before you did it?? And also did you replace the bushing only or the center arm piece too? Thx so much omg!
Why did you take the 02 snr outwjy not leav them in?
Good
On average, what would you say would be the amount of time it would take to do this job
I can’t get the driveshaft reconnected on the spines it won’t bottom out plz help
In the event that I replaced my the flex joints and center support bearing on my 06 cts 2.8l.. I didn't torqe the bolts on the center support and a couple days later I've lost my bolts... anyone know where to find bolts or thread size?!?? 😅
So will this work on a 2008 Cadillac CTS base rwd? Tried looking on your website couldn’t find anything.
+Robert Shivers We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Do you have to replace the drive shaft when doing support bearing?
+Mike Hudak Thank you for checking us out. You may not need to replace the entire driveshaft, but it has to be moved out of the way in most vehicles. 1aauto.com
- not normally.
It same for 2008 Cadillac CTS also
Does this work with the AWD versions as well? @1A Auto Parts
+Logan Ketchner Hello! That may depend on which year and model you have. If you are unsure of fit please contact us here: 888-844-3393. Thank you.
Do u have a website where i can buy parts, do u sell the rear driveshaft for 2008 cts Cadillac?
+Ana Tucker Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
I have a SRX 2014 that needs a rear support bearing, can it also be replaced?
+Mel Smith That can be replaced as well.
My driveshaft 08 cts awd is completely different. New bearing dust cap won't fit on, it's different than the one that came off. What is going on?
+Alan Torchia Thanks for checking us out. The part in the video is for the RWD and it is different than you AWD.
is this process the same with a 2004 Pontiac GTO?
tobroke2007 yes
Wallace Cadet seems to be no snap ring though.
tobroke2007 yeah ours just comes off
I changed my center bearing and the front and rear flex disc and now I have a weird vibration at sixty. any one know what I should do..
corey valade cv joints
this looks exactly like the 07 dodge charger drive shaft
Can anyone help me I need to get the support bearing replace that they're telling me that I have to replace the whole drive shaft I needed to see if this was true I just don't want to replace something that doesn't need to be replaced. I just don't want them to try to screw me over in charge me more because I'm a woman. Anyone plz help.
2008 Cadillac cts
Did you have to get the whole thing replaced?
Joshua Torrez nope! Just the bearing!
Telling me same shit did u ever get u answer
If your car makes a whinging/clicking noise when you let off the gas or hit the brakes there's a good chance it's the support bearing
What is a quoted price?
Is it the same for a 2010 cts4?
No you can take the center driveshaft a part and the back you do not have to take the front driveshaft apart if you’re only changing the center bearing
Will that bearing fit a 2005 srx
+John Hill This part will not fit on a 2005 Cadillac SRX, and we do not carry one for your application. 1aauto.com
Does anyone know what size diameter pipe he used?
MARK ANDERSON yeah one tha fit over his ratchet
Is this the same for 2009 CTS awd
+Ghostinthedark100 It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com
@Ghostinthedark100 did u replace yours? I also have a 2009 an need to replace center support. But looks like the bolt up on driveshaft at front of car is different
Too much work :(
You need to change the years on that that only goes up to 07 it does not go the same way on 2008 there actually is no video on RUclips how to change a 08 and up Center carrier bearing on driveshaft on Cadillac CTS is
+kayden capps Thanks for the tip! We'll pass this info along to our production team.
Just fyi. You don't have to remove the exhaust.
That bearing mounting method was pure butchery!