I did it allready! It works! The núcleo with current 12 volts works as a magnet also it can replace with neodimium magnets instead currents 12 volst from the batery
Nicely done but I want to see what kind of load you can apply on the output and how hot it gets inside. Also use it as a motor, not just as a motor driving a unloaded motor !
How about making a video applying load in real time with different types of loads every buddy needs to go all in .I can entertain my self I'm really not looking for entertainment just facts that may bring about a larger chunk of freedom for all
cool but go and watch ( liberty 1 and part 2 and 3 ) type that in lots don't believe it but he takes it all appart and shows everything also buy some neodeieyem magnets and add them into your altenator all the best
Idea is best ....... Excellent but you can do this by.. Use a inverter and 12v battery use a motor to run alternator and use the alternator to charge the battery.... Just try there'is no need to do any alterations to alternator
I have question can we use speed mosfet controler and bridge rectifier at same time? Can oscilator circuet by aplied on that alternator spining at centrain speed so he automsticaly swaps from generator to starter bruchless motor wuld that by posibel with automated switches? Other question I have how culd we force that same alternator to charge baterrys at low speed exampel 500rpm for smaller engines runing that generator wuld it by posibel. Third question I tried once useing hv ceramic capacitors on my ignition system so my starting charge on alternator got afected how do I protect my alternstor from external magnetic fields ? My starting charge was swaped from 1200rpm to 2500rpm when I used hv capacitors so any ideas hiw to prevent damage to alternators?
Can you please make a video and explain how it works? . . how are you using the regulator without ECU to control it? Does it produce AC or DC? useful video but INCOMPLETE
Dude this is what I need. I just can't find the parts. I need it to make 56-57v at about a 100-80amps. The windings I understand and I can figure my amps, rpm ect but the rectifier that hits 100amps at 56v is killing me. Any advice? If one that could do 57v at more amps is available that would work too but I'll never use the extra rating.
Would the wiring for the stator windings be in the same configuration if you wanted to use this as a motor? I have four sets of wires like you have and want to connect them to a speed controller.
@@blackz06 the wiring style was changed. original configuration was probably a "delta" and he converted it to a "wye". They have different charateristics in generating and using power. A you tube video would do far more justive than myself so I wont go into detail but look that up and youll see what he actually did here...Unless we didnt in which case it IS just an alternator lol.
Can I use it without the regulator, if I connect the u1,v1,w1 together and have just 2 wires out connecting with normal diode and capacitor, will it give me 12v and the max Ampere at output ?
He does not use regulator what he connected is three phase rectifier, you can make it using 6 diodes, it's very simple, to the two wires that he connected you need to connect a battery so it will energize the rotor, you can also attach neodimium magnets to the rotor and you won't need battery anymore.
I don't get this! The car engine spins the alternator to generate power to charge the battery and run other electrical components in the car. So why are modifications needed just because a blade spins the alternator. I get that the alternator needs to spin at a minimum RPM to function at a minimum, but it seems to me to be no different applying a combustion engine as a motor force as opposed to turbine blades.
He modified it so that the alternator output voltage is no longer limited to 14 volts. It can now also be run as a motor by applying voltage to the two posts that he is using as the output when running it as a generator.
Muchas gracias amigo tengo una moto ideal para hacer un generador portátil también tengo un alternador grande de 12vl a 110 amperaje la batería de la moto arrancará el eje del alternador ala hora que se prende la moto
Exactly what alternator do you show here ? It is EXACTLY what I need . It has a shaft that goes out of BOTH sides . I need one of these . Please share what it is ! I liked , subscribed and hit the bell . Looking forward to more informative videos like this . Thank you .
@Scaggs The ones I have, from US autos, have a shaft that PROTRUDES out of one side. I need to apply 2 pulleys, one at each end . Offset torque loads and what-not . Boat stuff. The one shown here is perfect
No. the battery only energizes the rotor windings to magnetize them. - Others build a new rotor with magnets instead of windings, no battery needed that way
well, not to impressed. power input Drill:18v(14a)= 258watts battery draw: 12v(2.5)=30amps total=288 watts output=48v(8)=384watts so a gain only of 96 watts
@@LICINIO-BATISTA I know why the brushes are there and what they do....the point is that if you HAVE brushes, it CAN'T be BRUSHLESS. It's like saying that "I can build a fire with this wood but there is no heat" The very title for the video says "brushless" (NO BRUSHES) and then the brushes are wired in early on in the video...the title is misleading at best...
dikit2 milai dipahami....makasih infonya pak
A motor spinning a motor spinning a motor. Brilliant.
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
Me gusto. La prueba
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Thanks for sharing
You have simply convert a alternator to another alternator. Not to brushless motor
Brushless motor with brushes is not brushless.
ขอบคุณที่แชร์วิธีทำดีๆให้ดูนะครับ
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
I what big moterDC to use may aterneneter
I like the chrome sockets and reducers on the impact ... Soo naughty 😉
Thanks you so much
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
I tuoi filmati valgono più di 1000 parole!
Very good project you guy
Thanks you so much
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
good job sir
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
hay quá
Thanks you
Kalau daya aki nya habis, hilang magnet rotornya, brrti hilang listriknya bang?
I don't understand the 'brushless' in the title. The brushes are still in use and connected by the yellow cables to the battery ?
The yellow wires with brushes are a electromagnet and the three wires are for the so called "brushless motor"
Great video but would love some verbal explanation of what you got going on
Om itu yg kelar dari dioda berarti udh dc ya om?
I did it allready! It works! The núcleo with current 12 volts works as a magnet also it can replace with neodimium magnets instead currents 12 volst from the batery
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
I contected another bridge from main wires to rotor and removed battery after starting.
Nicely done but I want to see what kind of load you can apply on the output and how hot it gets inside. Also use it as a motor, not just as a motor driving a unloaded motor !
Next video plz 😂
RUclipsrs Austiwawa and Fixitmoditbreakit made load tests with their measurement systems
Very good question load changes every thing all the videos about this subject do not ever get into load factor
How about making a video applying load in real time with different types of loads every buddy needs to go all in .I can entertain my self I'm really not looking for entertainment just facts that may bring about a larger chunk of freedom for all
@~\0
i want to buy this converted 2000w altinator
every nic
Love it
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
cool but go and watch ( liberty 1 and part 2 and 3 ) type that in lots don't believe it but he takes it all appart and shows everything also buy some neodeieyem magnets and add them into your altenator all the best
Thanks for the recommendation 😊👍🏾
Idea is best ....... Excellent but you can do this by.. Use a inverter and 12v battery use a motor to run alternator and use the alternator to charge the battery.... Just try there'is no need to do any alterations to alternator
Thanks you sir, i will try
Most welcome .... 😁
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Ok felicitari
thanks you
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
so you basically removed the original rectifier and installed another one outside. why?
Ok idea
Thanks sir
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Hola amigo creo sería mejor con imanes cosa q no llevaría cartones ni batería más bien te cargará las baterías del a alumbrado
would you still use a gear for the windmill here? 1:10?
I have question can we use speed mosfet controler and bridge rectifier at same time?
Can oscilator circuet by aplied on that alternator spining at centrain speed so he automsticaly swaps from generator to starter bruchless motor wuld that by posibel with automated switches?
Other question I have how culd we force that same alternator to charge baterrys at low speed exampel 500rpm for smaller engines runing that generator wuld it by posibel.
Third question I tried once useing hv ceramic capacitors on my ignition system so my starting charge on alternator got afected how do I protect my alternstor from external magnetic fields ?
My starting charge was swaped from 1200rpm to 2500rpm when I used hv capacitors so any ideas hiw to prevent damage to alternators?
Output DC?...
With that pump you could add a heating coil and have hot water too 🤔
Can you please make a video and explain how it works? . . how are you using the regulator without ECU to control it? Does it produce AC or DC? useful video but INCOMPLETE
I would love to see an update video
It's brushed not brushless, good work though.
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
if you change the rotor of the motor for a rotor with permanent magnets, you can transform this motor into a fully BLDC motor
Anybody know how much power I can put through the alternator i wanna make one that can 10kw or more but idk if they can handle that
what the voltage between I can use on a alternator to DC Motor
?
Сколько вольт ампер?
he went to go pick up that hydraulic puller and I leaned back to the left a bet so I wouldn't catch that monster elbow.
Stopid brushless
Cómo se llama el dispositivo que usas tipo relevador? Saludos
What are the characteristics of the bridge rectifier?
12 volt to the rotor is high (3 to 4) voltage is enough
yep
And how many amps for 3 to 4 volts is suffiecient
@@1danny2k no matter about amp
@@fewthings8917 not true. Amperage is determined by the rotator coil, often draws about 2 or 3 amps.
Dude this is what I need. I just can't find the parts. I need it to make 56-57v at about a 100-80amps. The windings I understand and I can figure my amps, rpm ect but the rectifier that hits 100amps at 56v is killing me. Any advice? If one that could do 57v at more amps is available that would work too but I'll never use the extra rating.
You can make your own based op singel diodes. 200 amp diodes (700 A peek) can go up to 170 V reverse tension
@@bartdepauw1156 thanks I got it figured out but I used a big diode pack for 200amps full bridge rectifier.
Почему нет детального описания!?
Why the battery man are you charging it or what ?
Ummm... you didnt even change how it originally works lol... it's still an alternator. Just doesnt have a voltage regulator.
Yep. I will do it in next version. Thanks you for good idea
@@MrYahaza Good idea?? Next time??? lol... It's the TITLE of your video. Quit misleading people.
Can u send video how u do
Thats not a brush motor... thats a some kind of generator
What is that the small one that you connect in 3 blue wires?
It's a rectifier. Just lile the one he cut out of the inside of the alternator. This is still just an alternator. No conversion has been made.
How can u say it is developing 2000W? You should have connected the load and shown.
Nope that ain't Brushless...Sincu you put back the brushless where they belong to bring electricity to the rotor...
how eficient can be? if you have to spend energy to the coil!
Yep. We spend a little bit. After alternator we can use energy from this
What is the name of the piece that collected the wires from three to two?
3 phase diode bridge rectifier Sir
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Would the wiring for the stator windings be in the same configuration if you wanted to use this as a motor? I have four sets of wires like you have and want to connect them to a speed controller.
الله ينور
How make self exict dyanmo don't use
where does this bridge rectifier enter?
see this maybe help you ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
What is the horse power of the motor?
just use the d2 electrify plate then your altornatir will not produce magnate
The energize the rotor, you are using the brushes. Hence, your description in inaccurate.
Yep. Next time i will fix it
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Can u give us more details what have u done to connect it like that? And what parts did u used 5:22 ? Please, thanks
You can contact to me through m.facebook.com/ofanamotorcycles
He literally didnt do anything. It's working just like an alternator should. Just doesnt have a voltage regulator.
@@blackz06 the wiring style was changed. original configuration was probably a "delta" and he converted it to a "wye". They have different charateristics in generating and using power. A you tube video would do far more justive than myself so I wont go into detail but look that up and youll see what he actually did here...Unless we didnt in which case it IS just an alternator lol.
@@brianbright7614 I fully understand wye and delta configurations. He achieved nothing in this video lol
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
So where is the brushless part from title?
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Can this be used to generate power from wind
yes sir
these guys do not know anything about brushes.
⁹
How the hell do you consider it brushless when it has brushes?
Carban bush inside again .
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
This is waste, see in rotor fix neodium magnet and it will generate max power
Hi can u use a junk alternator u replaced from your vehicle
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
Can I use it without the regulator, if I connect the u1,v1,w1 together and have just 2 wires out connecting with normal diode and capacitor, will it give me 12v and the max Ampere at output ?
He does not use regulator what he connected is three phase rectifier, you can make it using 6 diodes, it's very simple, to the two wires that he connected you need to connect a battery so it will energize the rotor, you can also attach neodimium magnets to the rotor and you won't need battery anymore.
I don't get this! The car engine spins the alternator to generate power to charge the battery and run other electrical components in the car. So why are modifications needed just because a blade spins the alternator. I get that the alternator needs to spin at a minimum RPM to function at a minimum, but it seems to me to be no different applying a combustion engine as a motor force as opposed to turbine blades.
He modified it so that the alternator output voltage is no longer limited to 14 volts. It can now also be run as a motor by applying voltage to the two posts that he is using as the output when running it as a generator.
Sir how much rpm it need to produce electricity...
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
slightly more than zero rpm (if you have a battery)
what was the device that you attached to the alternator?
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
I was wondering the same question
This is not brusless....
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
what did you gain
Not a brushless motor
Just put some magnetic 😂
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
don't understand why you need to convert. It is a generator once your rotate it, and it is motor once you supply a 12V. and it is still brush.
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
Muchas gracias amigo tengo una moto ideal para hacer un generador portátil también tengo un alternador grande de 12vl a 110 amperaje la batería de la moto arrancará el eje del alternador ala hora que se prende la moto
need bateri for work.. pooff.. poorrrr garbage..!!
I'm at 4:00.
Has video started yet?
see this maybe help you ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Bro is it work like both dc motor and generator ?
You keep saying that word. I do not think that word means what you think it means. Brushless?
Exactly what alternator do you show here ? It is EXACTLY what I need . It has a shaft that goes out of BOTH sides . I need one of these . Please share what it is ! I liked , subscribed and hit the bell . Looking forward to more informative videos like this . Thank you .
Do you have Facebook or skype?
@@MrYahazacan you tell me how to make it work with ny alternatir
@Scaggs The ones I have, from US autos, have a shaft that PROTRUDES out of one side. I need to apply 2 pulleys, one at each end . Offset torque loads and what-not . Boat stuff. The one shown here is perfect
does the battery automatically charge in that set up sir?
No. the battery only energizes the rotor windings to magnetize them. - Others build a new rotor with magnets instead of windings, no battery needed that way
This is not a brushless anything! You put the brushes back in and are powering the rotor with the external battery through them! Misleading title.
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
what are the specifications of the alternator?
How the name cunikit auit gnareter name
What is the point of making a video if there is no explanation of what is going on. Complete waste of time.
Alternator converter to another alternator lmao... you don't need to doing anything to produce energy from a alternator...
How about conection
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
Internet connection ?
Não faz sentido gera uma energia que já existia energia que faz a furadeira trabalha kkkkk. E qual motor que vai da essa rotação kkkkk .
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Very disappointing as there is no commentary and no information. Just useless.
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
well, not to impressed.
power input
Drill:18v(14a)= 258watts
battery draw: 12v(2.5)=30amps
total=288 watts
output=48v(8)=384watts
so a gain only of 96 watts
But you're not taking into account that you'd not use a drill to spin it. You'd use the wind or flowing water to generate the rotation.
what is the energy benefit from this project????. Are you mad?? other's time wasting...do sensibly....
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Bushless😂😂😂 brushless
Just wondering, did you type "brushless" in your description before or after you wired the brushes.....smh
see this maybe help you ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
@@LICINIO-BATISTA it can't have brushes AND be brushless.....is that really so fucking hard to understand?
@@TheWingnut58 yes it can the brushes is only to suply the rotor of the alternator but if you put magnets in to the rotor you dont need the brushes
@@LICINIO-BATISTA I know why the brushes are there and what they do....the point is that if you HAVE brushes, it CAN'T be BRUSHLESS.
It's like saying that "I can build a fire with this wood but there is no heat"
The very title for the video says "brushless" (NO BRUSHES) and then the brushes are wired in early on in the video...the title is misleading at best...
@@TheWingnut58 normally no it can t have the brushes to be brushless
Why did he remove the Rectifier... and then replace it with another one.....Stupid waste of time...
Because it broken bro
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
Very bad, no explaination
sr about that, i try expain by using Subtitle
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
No sense!!! You could connect and drive the alternator you purchased. How brushless it is, the brushes you connected! Complete nonsense!
see this video maeby it heps to yor prject /////ruclips.net/video/2F78rWju3D4/видео.html\\\\\
No explanations of what is taking place, just music. A very bad video!
see this one maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
What's ur Address
I’m from Vietnam
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista
This isn't brushless....
see this maby it hellps ruclips.net/video/XWlG5jXvwAQ/видео.html&ab_channel=liciniobatista