A temperature sensor for the batteries would have been nice. It could then tell you via bluetooth that you batteries are on fire if you are in the next room! Nice review and nice charger I will recommend it to my customers.
I have the very oldest brother of this charger, i will not be surprised if the new generation of them keep working pretty nicely, skyRC makes generally some pretty cool & decent chargers... Thanks for sharing Ali and enjoy the rest of your week
I have had problems with my first Skyrc charger (MC3000). Just after few charge cycles the internal power supply which powers the screen failed. It worked only if I used an additional USB power supply. Luckily I got a replacement device for half the price. Next time I buy a new charger model from Skyrc I will wait till they have managed to design a fault-free device.
Any idea the reference of the cell resistors? I have to replace 2 on port B of my charger
8 лет назад
Could you please check the settings and try to find the settings: "Bal. Connection", for "Balance connection", should have settings "ON" and "OFF" available. This would allow charging LIHV batteries w/o a balance lead. Thank you in advance!
Igor Bujanović i have that option ona d100 v2 and i am searching what it actually does! The charging seems to be balanced on balance charging even with the “balance port connection” off.
Hello i bought the SkyRC Q200, can you tell me why are the two side fans for cooling when charging the batteries do not come into operation? I plugged the phone into the usb port to load it, but it does not charge. Can you help me? bye thank you
@@alishanmao Do you know where I can get tech support for this unit. I have the one plug LiPo batteries and when I hook it up I get a message that no battery is found. I was sure it was in the correct socket. I tried their website, but when I sent a email I got no reply so far.
Hi. Can you help me set STORAGE programme. I have this battery 5400 mAh 4S, 14.8V. As I understand for the storage this should be charged/discharged to 15.2V. But I am not sure how to do that as I do not see any settings where I can setup STORAGE voltage. Please help me understand that.
is it 10amps a/b channels and 5 amp c/d channels making it 30 amps in total or is 10 amps shared a/b and 5 amps shared c/d making it 15 amps, just wanting to know so i know the max number of battery's i can charge at once in parallel, im looking at the skyrc 1000w at 40 amps and the turnigy 1400w at 40 amps you had any experience of these i need a big amp charger for parallel charging cause my amount of batteries just keeps getting bigger.
max Amps = 10 + 5 =15 Amps :Charge current : Channel A/B : 0.1 -10A; Channel C/D : 0.1-5 Amp...so if you want to charge that big 4S 10.000 mA Lipo ..the max charge = 100 ( watt) /16.8( volts 4s Lipo) = 5.95 Amps !! is NOT even 1C ( 10 Amps)...so if you are in a hurry then this 200 watt charger is not big enough..but for normal Lipos 3S 4S with up to 5 amps each....no problem..power distribution of the Q200 is 200 watt max.. For example Channel B =79 Watt then Channel D will be 21 watt, but total power will remain 100 W..channel A and C works the same way 100 watt max. .... on AC....
Hi. Im new to battery charging. And im looking for a good charger. I will be chatging nimh battery. Is this charger have a balancer for nimh?(AA nimh will be putting on battery tray)
@@alishanmao thanks for the reply. But is thete any chance you do break in of nimh? My nimh tends to loose voltage after i charge it. From 1.5 drops to 1.42 after an hour. Usually it should only drop upto 1.47. Any ideas? Thanks
+Rizki Pratama When I was a newbie in rc, I acquired 4 50-80w 4-button chargers to charge my lipo batteries. Then I purchased a high end 1300w charger to parallel charge. What a difference ! now I don't need 2 shopping bags of chargers to configure. new charger is less bulk and much quicker as well.
+Morten Vatne Charge different batteries at once, don't need to match voltages and monitors each cell so less chance of a house fire. +AMA Look up DPS-1200FB. They are old server power supply units which, while they do require some soldering before use, output a huge 1200 watts of power for only $25. I've got six of them and never had any problems.
Lord Grief Mc. Scumbag Two port chargers are a MUST for charging two different types of batteries or number of cells. There is no wirk around that. And yea I know about those modified HP server power supplies, lipoconnectionsolutions has them and he has safety features implemented too (prevent yourself from getting electrocuted, reverse polarity...) I am getting a PL8 soon with a 1.5W PSU
SORRY THESE SKYRC CHARGER ARE VERY LOW QUALITY AND WILL DIE AFTER 1.5YEARS MY OTHER PICHLER CHARGER IS 6YEARS OLD AND STILL WORKING. DONT BUY CHARGERS FROM SKYRC, YOU CAN FIND MANY PEOPLE WHO GET THE !!! TEMP ERROR!!!
Hitec a copy of skyrc or inverted? It's not a cheap charger for don't have quality. I have one turnigy tq-4 for 2 years and make happy and I pay U$ 65 Q200 if a charger of U$ 159 and you say not is good?
A temperature sensor for the batteries would have been nice. It could then tell you via bluetooth that you batteries are on fire if you are in the next room! Nice review and nice charger I will recommend it to my customers.
I have the very oldest brother of this charger, i will not be surprised if the new generation of them keep working pretty nicely, skyRC makes generally some pretty cool & decent chargers...
Thanks for sharing Ali and enjoy the rest of your week
Yup they do. Thanks for the info buddy
I have had problems with my first Skyrc charger (MC3000). Just after few charge cycles the internal power supply which powers the screen failed. It worked only if I used an additional USB power supply. Luckily I got a replacement device for half the price. Next time I buy a new charger model from Skyrc I will wait till they have managed to design a fault-free device.
Awesome charger. I have its younger sibling S60 which is ample for charging multiple 3S batteries using a parallel board.
I received mine yesterday. Totally awesome!
Did dad like it?
Great Video Alishanmo!!! You are the reason I bought the AOSENMA CG035. Will the Q200 charge the CG035 batteries?
Good review! I am going to sell my old Graupner Ultra Plus Duo 50 and get this one!
Any idea the reference of the cell resistors? I have to replace 2 on port B of my charger
Could you please check the settings and try to find the settings: "Bal. Connection", for "Balance connection", should have settings "ON" and "OFF" available.
This would allow charging LIHV batteries w/o a balance lead. Thank you in advance!
Igor Bujanović i have that option ona d100 v2 and i am searching what it actually does! The charging seems to be balanced on balance charging even with the “balance port connection” off.
I'm thinking of buying this charger. Would you still recommend it?
SkyRC makes good chargers.
Is this still a good charger or you suggest any other
Yes still a good charger. thought there are new ones too. Try HTRC T240 or ISDT D2 Pro
bit.ly/2GmGKeG
bit.ly/2sQit5C
Hello i bought the SkyRC Q200, can you tell me why are the two side fans for cooling when charging the batteries do not come into operation? I plugged the phone into the usb port to load it, but it does not charge. Can you help me? bye thank you
can I use a stronger power supply via the DC-port? Or does that only work with chargers that have no integrated psu?
yes you can
Look under there should be flip up legs to tilt the charger so you can see the screen easier
Will do :)
@@alishanmao Do you know where I can get tech support for this unit. I have the one plug LiPo batteries and when I hook it up I get a message that no battery is found. I was sure it was in the correct socket. I tried their website, but when I sent a email I got no reply so far.
Hi. Can you help me set STORAGE programme. I have this battery 5400 mAh 4S, 14.8V. As I understand for the storage this should be charged/discharged to 15.2V. But I am not sure how to do that as I do not see any settings where I can setup STORAGE voltage. Please help me understand that.
how much voltage do i need to put in dc input to activate the 100/100 watts per port??
Why not have TVC function. (Use for 4.20V Over charge)
hi, if i want to feed it with a 12 volt car battery, how many maximum amperals does it have to have? thanks for the reply
It will break your car battery
How does this compare to the icharger?
thats a mean machine!!! Nice review. cheers.
How to change the maximum voltage to cells
Please help! How to upgrade firmware on skyrc charger q200.
That eagle EPP pls do a review about that plane.
is it 10amps a/b channels and 5 amp c/d channels making it 30 amps in total or is 10 amps shared a/b and 5 amps shared c/d making it 15 amps, just wanting to know so i know the max number of battery's i can charge at once in parallel, im looking at the skyrc 1000w at 40 amps and the turnigy 1400w at 40 amps you had any experience of these i need a big amp charger for parallel charging cause my amount of batteries just keeps getting bigger.
max Amps = 10 + 5 =15 Amps :Charge current : Channel A/B : 0.1 -10A; Channel C/D : 0.1-5 Amp...so if you want to charge that big 4S 10.000 mA Lipo ..the max charge = 100 ( watt) /16.8( volts 4s Lipo) = 5.95 Amps !! is NOT even 1C ( 10 Amps)...so if you are in a hurry then this 200 watt charger is not big enough..but for normal Lipos 3S 4S with up to 5 amps each....no problem..power distribution of the Q200 is 200 watt max.. For example Channel B =79 Watt then Channel D will be 21 watt, but total power will remain 100 W..channel A and C works the same way 100 watt max. .... on AC....
Hi. Im new to battery charging. And im looking for a good charger. I will be chatging nimh battery. Is this charger have a balancer for nimh?(AA nimh will be putting on battery tray)
there is no balancing option for NiMh :) you just charge them on nimh setting
@@alishanmao thanks for the reply. But is thete any chance you do break in of nimh? My nimh tends to loose voltage after i charge it. From 1.5 drops to 1.42 after an hour. Usually it should only drop upto 1.47. Any ideas? Thanks
I assumed you don't fly big heli anymore Ali?
yeah man. too much unwanted expenses and time consuming repairs
+alishanmao yeah those 3D skills doesn't come cheap.
Seems voice alerts not there like D100V2
Nice video!
Thank you very much!!!!
Very nice review!
walikom aslam, brother from where can i get orginal one like this charger ? i heard there is some fake chargers.
Online :) check the link in my video description
Why would this be better than a single powerful charge port, able to parallel charge many lipo batteries?
The only think dual port charger is usefull is when you need to charge different cells number at the same time. I do parallel charging all the time.
+Rizki Pratama When I was a newbie in rc, I acquired 4 50-80w 4-button chargers to charge my lipo batteries. Then I purchased a high end 1300w charger to parallel charge. What a difference ! now I don't need 2 shopping bags of chargers to configure. new charger is less bulk and much quicker as well.
But those mostly need DC input, and power supplies are quite expensive
+Morten Vatne Charge different batteries at once, don't need to match voltages and monitors each cell so less chance of a house fire.
+AMA Look up DPS-1200FB. They are old server power supply units which, while they do require some soldering before use, output a huge 1200 watts of power for only $25.
I've got six of them and never had any problems.
Lord Grief Mc. Scumbag Two port chargers are a MUST for charging two different types of batteries or number of cells. There is no wirk around that.
And yea I know about those modified HP server power supplies, lipoconnectionsolutions has them and he has safety features implemented too (prevent yourself from getting electrocuted, reverse polarity...)
I am getting a PL8 soon with a 1.5W PSU
Very Nice
nice brother 👍 👍 👍 excellent
Still can't buy it in US.
please review and tes flysky fs-i6s 10ch.....
wassalam...
indoor review coming soon. Testing will need time
How much is it in dubai?
The D100 is around 500 dhs, this will be slightly more. Probably 750.
Check Dubizzle.com
Junsi i charger got power.... 80A,40 per canal I dont know how to use that Sky rc 4 canals and poor efficiency that is mistake...
Hi
I am mozlim and you to you are the best I am Kuwaiti 💚💙❤️
Mozlim?
waalaikumsalam :-)
SORRY THESE SKYRC CHARGER ARE VERY LOW QUALITY AND WILL DIE AFTER 1.5YEARS
MY OTHER PICHLER CHARGER IS 6YEARS OLD AND STILL WORKING.
DONT BUY CHARGERS FROM SKYRC, YOU CAN FIND MANY PEOPLE WHO GET THE !!! TEMP ERROR!!!
Oeve Geypen Isn't this a copy of the Hitec X4 Pro?
Yep that what it is.
Oeve Geypen LoL, ok, so I'm guessing I'm better off going with the Hitec, thank you!
Hitec a copy of skyrc or inverted?
It's not a cheap charger for don't have quality.
I have one turnigy tq-4 for 2 years and make happy and I pay U$ 65
Q200 if a charger of U$ 159 and you say not is good?