How to Install a Garage Door Safety Cable
HTML-код
- Опубликовано: 1 окт 2017
- Instruction about how to install garage door safety cables. Installation of safety cables through garage door extension springs is an important safety feature.
More Know How Now videos about garage door repair • Garage Door Repair Videos
Check out my other videos, bookmark this channel by subscribing, it’s free! / @know-how-now
Disclaimer: Due to factors beyond the control of Know How Now, I cannot guarantee against improper use or unauthorized modifications of this information. Know How Now assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Know How Now recommends safe practices when working and or with tools seen or implied in this video. Due to factors beyond the control of Know How Now, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Know How Now. 
Хобби
More Know How Now videos about garage door repair ruclips.net/p/PLvce66kQTjJRJKROOLMF-maHA5gUpZsUV
There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link:
www.youtube.com/@Know-How-Now/videos
Recently (January 2023) I had to replace my garage door's extension springs. A friend was kind and generous enough to help me. We followed the instructions in your videos, and as a result, the job was completed without problems. Thank you VERY much for making these videos.
You are welcome, Kevin. It's good to hear from you and that the videos were helpful.
The new extensions springs for my garage door included safety cables. The instructions for the safety cables were nearly useless.
Thank you for the simple and clear video. My garage door is safer as a result.
You are welcome, it's my pleasure to help.
I sure do appreciate folks like yourself who post "How to" videos for folks like me. I thank you. I just bought my first house and I wish you could see the potential of this place that was built while Edison was alive but the entire house had someone who certainly had no idea what they were doing in it before I got here and likely didn't use or have internet. With that being said, a wide shot then the close up of what you are doing might help the helpless such as myself. I know that is a lot of editing so I still applaud you if you never do it.
Thanks again!
Best wishes for your new home. Thank you for the constructive criticism, I am always trying to improve the videos. This was an early video, so it's a little rough. It is difficult to get a wide shot while inside a single car garage. I will keep your suggestion in mind for future videos. BTW - There are over 200 videos, organized by playlist on the channel. If you have a few moments, click on the channel name to check it out. Subscribing is free and you will easily be able to find all of the videos, they will not always come to the top of your search list.
Helpful info and unusual pronunciation of iron. It's "eye-urn", not "eye-run". But I got the point. ;)
We drink "wadder" here too. lol.
Thank you so much for this video, my husband and I just bought our first house and my brother pointed out we needed to do this for safety, but we had no idea how. Super easy to follow!
Congratulations on the purchase of the new house, Amanda.. It's my pleasure to help. There are a lot of other videos on the channel you might find helpful for other home repairs. They are organized by playlist, so it's easy to check them out by topic.
I just wanted to thank you for these videos. I just replaced my garage door springs, both sides. I also installed new safety cables, pulleys and pulley cables. Your videos were so helpful, and made the job so much easier. For less than a hundred dollars, I did a job a professional would have charged $500 to do. Thanks again, I'll be sure to check out some of your other videos.
You are welcome, Ed. It's great to hear that you could use the videos to fix your garage door. I do my best to give accurate and the right amount of information needed to do something, and avoid any dangers or potential mistakes. Please subscribe to the channel, it will allow me to continue to add more videos.
I need to add the safety cables since there was none when I bought my house. I am a pretty handy person when it comes to repairs and maintenance around the house, however, hopefully your video will make things much easier. I have already replaced the rubber seal at the bottom of the door. Thank you for sharing.
Best wishes for the safety cable installation.
Always the best tutorials ! Thank you.
You are welcome, Steven. Thanks for watching the videos!
Very good video, explanation was very detailed and understandable. Viewers might want to see what a failed spring looks like in action. It happened to me. I was carrying my child in the line of sight just seconds before it broke... we were lucky, but it was heart stopping. This should be required, not optional.
Thanks for taking the time to comment, Mark. Good no one was hurt. I've only ever heard a spring break, the noise is a real attention getter.
A second video I watch from you and also very helpful. Subscribed.
Thanks for the compliment and subscribing. I do my best to make the videos concise, helpful and accurate.
Thank you for the video - very helpful !
You are welcome, Lee.
Thank you very much for your "step by step" instruction ma'am, it made it sooo easy to understand...many like to you ☺
You are welcome, William. It's my pleasure to help.
As always your videos helped me. Thanks
You are welcome, it's my pleasure to help.
This is fantastic video! Thanks it helps me so much!
You are welcome, it's my pleasure to help. Have a great day.
thank you! i'm studying to become a licensed home inspector and i had no idea what a safety cable was for a garage door
You are welcome, Luis. Best wishes for your studies.
Great video! I will comment on every video of yours I watch. Thank you so much for help
You are welcome. Thank you for taking the time to comment. It's great to hear you have found the video helpful.
Great video you share tips and tricks , thank you.
You are welcome, Peter.
A lot of new springs come with the safety cable, but just a cheap one with no ends. If you don't have ends, you can "tie" it just like how you terminated the end on the lifting cable, except you can do that right in the metal mounting track mounting brackets because it already has tons of holes to feed the wire through.
I agree with everybody else. This is way better then the instructions that come with the safety cables.
Thanks for the compliment, Andy. I do my best to make quality videos.
Thank you. I subscribed.
You are welcome. Thanks for watching the video and for supporting the channel by subscribing... it's greatly appreciated.
You are awesome
Beautiful guide by a beautiful person. Thank you so much for sharing your knowledge. I think you should add a disclaimer however just to cover your behind should something happen.
You are welcome. Thanks for the suggestion to add a disclaimer. After a video is uploaded, it can't be changed. A new upload looses it's ranking.
Thanks for the video. The instructions with my new springs weren’t to clear.
You are welcome, James.
Very useful, thanks.
You are welcome, Antony.
This video will help me install the safety cables myself. One question...the safety cable sold by our local Home Depot has one looped end only and the other does not have a loop or clip, it has a cable stop secured on it only. How should I install this end? Is there a missing part I need to buy? Thank you!
I looked at HD's cables, is it the Everbuilt one with the cylinder on the end of it? Here's the link: www.wireropes.co.nz/resources/wire-rope-clip-use-guide
If yes, there is an instruction sheet on the HD page, step 3 says: Attach flat bracket with 5/16 inch bolt (not included) on the free end of the cable to the frame support. www.homedepot.com/catalog/pdfImages/89/894bc9d0-3793-463e-94f7-e49e3fa8a778.pdf
I am translating their instruction to mean that you should buy a cable adjustment clip (shown at :49 of the video) and attaching it to the non loop end of the cable. Then bolting the cable adjustment clip to the frame support (as I suggest in the video).
Two other suggestions, you could buy a wire rope clip (probably less than $1) Run the non loop cable through to holes on the frame support (cut off/remove the metal cylinder) and use the rope clip (I don't think you need to use 3 rope clips, just one) to secure the cable end: www.wireropes.co.nz/resources/wire-rope-clip-use-guide
Or perhaps you can again remove the cylinder, loop the cable through two holes in the frame support and tie it, sort of like this:
www.google.com/imgres?imgurl=http%3A%2F%2Fwww.homerepairtutor.com%2Fwp-content%2Fuploads%2F2012%2F07%2FPlace-a-Reference-Mark-on-the-Steel-Safety-Cable.png&imgrefurl=https%3A%2F%2Fwww.prettyhandygirl.com%2Fhow-to-replace-garage-door-extension-springs-guest-post-home-repair-tutor%2F&docid=vDtR2KoKeho88M&tbnid=x8bgaGJKx2-DiM%3A&vet=10ahUKEwjfwbuR65jXAhWD7YMKHZ0jDuMQMwhoKAMwAw..i&w=587&h=455&bih=589&biw=1366&q=fasten%20garage%20door%20lift%20cable&ved=0ahUKEwjfwbuR65jXAhWD7YMKHZ0jDuMQMwhoKAMwAw&iact=mrc&uact=8
Thank you so much! Your video and above reply are very helpful indeed! I went to HD and purchased 1/8" cable clips and thimble to create a nice loop on the free end of the cable. I have now the option of just inserting it through a hole in the frame support or attaching it to an S hook which I also purchased. I think the S hook will be easier for my type of hardware. Thanks for providing the link to the proper way to secure the clips on the cable; I never would have known there is a right way to do it! LOL. Minor correction to your comment above... here is the correct link to the HD Everbilt cable I used: www.homedepot.com/p/Everbilt-8-ft-Garage-Door-Safety-Cable-5020A31/202088368 HD does not sell a flat bracket separately, that would have been simpler to use with an S hook. Thanks again!
You are welcome. Thanks for commenting, your experience may be helpful to someone else..... and thanks for correcting the link. I see I pasted the wrong one in there.
Just wondering, how much would it cost to have a professional install a garage door safety cable?
Call a local door company and ask for their labor rate, minimum charge & how they charge you for travel time. Ask for an estimate. It would be great if you would post what you find out.... it may be helpful to other viewers.
Connecting the cable to vertical door support not horizonal ??