Sometimes it still doesn't work especially first thing in the morning on a cold day when the oil is like treacle. Then you have to crack off the knuckles and release the pressure that way
Hey! I have a slight issue with my bobcat, my auxiliary hydraulics engagement for my excavator doesn’t seem to be functioning after i cleaned my excavator with water in the cockpit and all the electrical components by accident, any tips to fix it?
Hello Mr. Dancingbanna168, our recommendation is to contact your nearest Bobcat dealer. Their Service department should be able to diagnose their equipment.
Hi, can you tell me what a Hydraulic Pressure Relief Pull is? Is there an item that is actually called a "Pull" or is the thing actually called a "puller", and what does it look like? Really grateful for any answer😊
Hey, we have a kubota u27-4. We're having this exacte pressure problem on the auxiliary system n°1. We can pop in the right one without problem, but not the left one. Any advice on how to release that pressure? We tried the same method but didn't work. Since it's a slightly different machine, maybe it's a different way.
I might recommend doing a similar method, only try relieving the auxiliary pressure. If this doesn't help, contact your local Kubota dealer. Their service department hopefully can recommend something.
@@1stchoiceequipment136 thanks. We did try that, and it relieved the pressure on the right pipe, but the left pipe is unaffected. We'll call our dealership then. Thanks again.
Secure lever down, make contact with ignite key, press middle knob once on the control screen and then press all knobs randomly on both joysticks left and right
@@1stchoiceequipment136 : He didn't actually invent it but he was instrumental in opening it up from exclusive government & university research use to the general public. He was also instrumental in opened up WAAS GPS to the general public, which until then had been limited to military use only. As a pilot I appreciated this because it made GPS accurate to within approximately 36 inches thus allowing for far more accurate navigation and safer landings in IRF conditions. Also: Great video! It was very helpful as I has forgotten the procedure for releasing hydro pressure.
Secure lever push down, then make contact without ignition, then push aux knob or knob which activate hydraulics and then you have to move all knobs on both joysticks atvthe same time to release the pressure; it can be heard from the cabin when clicking. Wright?
Thanks! You just saved me a lot of trouble! Really appreciate you posting
What if this doesn’t work?
Then try to like you want to screw off a little one of the pipeline on the place where its most easy to do just to release a few drops of oil.
Sometimes it still doesn't work especially first thing in the morning on a cold day when the oil is like treacle. Then you have to crack off the knuckles and release the pressure that way
Hey! I have a slight issue with my bobcat, my auxiliary hydraulics engagement for my excavator doesn’t seem to be functioning after i cleaned my excavator with water in the cockpit and all the electrical components by accident, any tips to fix it?
Hello Mr. Dancingbanna168, our recommendation is to contact your nearest Bobcat dealer. Their Service department should be able to diagnose their equipment.
Hi, can you tell me what a Hydraulic Pressure Relief Pull is? Is there an item that is actually called a "Pull" or is the thing actually called a "puller", and what does it look like? Really grateful for any answer😊
Does this work on John deer 35g
Lifesaver, thanks for your post
Hey, we have a kubota u27-4. We're having this exacte pressure problem on the auxiliary system n°1. We can pop in the right one without problem, but not the left one. Any advice on how to release that pressure?
We tried the same method but didn't work. Since it's a slightly different machine, maybe it's a different way.
I might recommend doing a similar method, only try relieving the auxiliary pressure. If this doesn't help, contact your local Kubota dealer. Their service department hopefully can recommend something.
@@1stchoiceequipment136 thanks. We did try that, and it relieved the pressure on the right pipe, but the left pipe is unaffected. We'll call our dealership then. Thanks again.
John Deere 35g breaker lines pumped up...... Same fix👍 thank you.
Glad we were able to help
Secure lever down, make contact with ignite key, press middle knob once on the control screen and then press all knobs randomly on both joysticks left and right
Nice
I don't know if it is good or not, but in your thumb nail, you look like Al Gore.
Well he did invent the internet, which gave us RUclips, which in turn gave us this opportunity to produce a highly educational video.... so thank you.
@@1stchoiceequipment136 : He didn't actually invent it but he was instrumental in opening it up from exclusive government & university research use to the general public. He was also instrumental in opened up WAAS GPS to the general public, which until then had been limited to military use only. As a pilot I appreciated this because it made GPS accurate to within approximately 36 inches thus allowing for far more accurate navigation and safer landings in IRF conditions. Also: Great video! It was very helpful as I has forgotten the procedure for releasing hydro pressure.
Kubota u-17
Thank you
Lol this is wrong, on the kubota you have to press the aux button first and you only have to release the aux function button.
Secure lever push down, then make contact without ignition, then push aux knob or knob which activate hydraulics and then you have to move all knobs on both joysticks atvthe same time to release the pressure; it can be heard from the cabin when clicking.
Wright?
😂