I love the fact you're making this gt500 more street car friendly. It's good that people see this and understand that when you're talking about a street car every last hp and every last tenth isn't always what makes the decisions. You can have a very nice driving and fun street car that can still get down at the track by going with a setup like what you're going with. Everyone wants a huge Whipple and an auto and all the hp till they find out the car drives like shit and isn't fun anymore outside of the drag strip. I think keeping the manual and going tvs is absolutely ideal for a street car and judging by your actions with this car you agree. Good job.
Re: throttle bodies. I’m not sure about the newest vmp throttle bodies but if I’m not mistaken everyone else was using the stock ford actuators to operate their big ass throttle bodies and they all had issues like this where the actuator wasn’t strong enough to hold the tb open. There are a couple people who lost motors because the Tb did some sort of reset calibration at WOT. Honestly the primary benefit of turbos and centrifugal superchargers imho is compressing the air before it gets to the throttle body so you can use a stock throttle body
Hey Alex, I remember Demonology had a similar issue. Turned out to be the electronic throttlebody couldn't handle the pressure so he had to go old school drive by cable. Hope this helps.
Great video! Very much appreciate the technical videos and illustrating the bumps in the road you encounter along the way and not just showing the clean finished product after install. It’s important to show that all this is not just “plug n play” as many will portray it to be. Please don’t stop doing what you do. Much continued success sir!
Gotta say I agree. One of multiple reasons I went with an 07 gt500. I have a gen3r on mine I can't say enough good things about the tvs. For a street car tvs all day every day and they can go quick at the track too.
Nicely done. I'm a diehard whipple guy and I am looking forward to seeing the results when you get it on the dyno. Do you think you would get this TVS ported in the future? Not many guys are doing videos of each upgrade like you are with all your vehicles. Godspeed and keep up the good work.
Badass. Being that I have a 2.9 whipple gt500, this is very relatable content. Tig vision I think makes a battery/catch can that goes in the location of the stock battery, or just run breathers with sweat bands around them to prevent oil spray on the coil covers you know, foxbody style.
A little crank case oil blowing on your s/c rotors is good for keeping them lubricated... At least that's what my buddy's dad's uncle on his mom's side says
Twin screws are more efficient than roots style blowers so I dont see you making more power or even equal power by swapping. Also the reason the TVS is easier to rotate by hand VS the Whipple is due to the fact a twin screw actually compresses air inside itself so there is more resistance to rotation as you compress the air while rotating it.
Used to have a 2.3 whipple on my truck, miss that. Has an s480 now and while it makes way more power, it's not a fun. Blowers on daily driver shit is > Turbo.
Not just daily drivers but street cars in general. People always use the term daily drivers but not all street cars are dailies but you still want them to drive nice on the road. Blowers on a STREET CAR is > turbo There fixed it for ya lol
@@midnight347 you are not wrong sir. And I appreciate the edit. The truck in the picture I do daily drive. Just not when it snows. I am in northwest Ohio after all. It's that or my LS swapped fairmont. Which I want to put a blow on...
The hate is strong for JLT in this video. lol. It's going to be cool to see what it was makes with the TVS. I wonder if it will make more heat than the old whipple.
@@markhutchins3643 BMR was the whole FKA situation. He addressed the JLT thing out right in the live where Gale Banks roasted JLT for their TRX intake testing
Curious to see what kind of power the 2.65 makes versus the whipple. I currently have a 4.0 whipple on my built motor GT500 and have been considering swapping to a TVS or 3.8 whipple.
If your car is a street car first and foremost go with the gen3r and don't look back. They can still make ALOT of power but they feel 100x better on the street and more fun to drive in normal street driven rpm ranges.
@@midnight347 if you don’t have real experience don’t say that, i have a kenne bell 3.2 on mine , and my friend has a 3.4 Whipple, both are similar “friendly” when compared to the stock eaton M122.
Do you think the same or similar logic applies to the 2300 vs. 2650 Alex? As far as the “instant” throw into the back of the seat? … Looking forward to seeing the IAT numbers and the delta between these two blowers! I think the 2650 will surprise the party.
Hey Alex, I have a gen3r on my built motor 2014 gt500. 2.4 upper and 10% lower with an 85.3" belt. I have the bps ac delete to install but can't find and belt length info. Do you know if the bps kit is the ac idler that you have installed? Thanks in advance and keep up the great content!
Hey bicho what ever condo or town house complex you live in thats lets you have that many cars is gold bro down here in my miami its 2 cars per unit and if you have any others figure it out! 😂🤣
What is the 4.5 Whipple's rpm limit? I'm guessing it's not even close, maybe a smaller blower closer to the limit and great cooling could be better. My .02c, correct me if I'm wrong.
I love the fact you're making this gt500 more street car friendly. It's good that people see this and understand that when you're talking about a street car every last hp and every last tenth isn't always what makes the decisions. You can have a very nice driving and fun street car that can still get down at the track by going with a setup like what you're going with. Everyone wants a huge Whipple and an auto and all the hp till they find out the car drives like shit and isn't fun anymore outside of the drag strip. I think keeping the manual and going tvs is absolutely ideal for a street car and judging by your actions with this car you agree. Good job.
Re: throttle bodies.
I’m not sure about the newest vmp throttle bodies but if I’m not mistaken everyone else was using the stock ford actuators to operate their big ass throttle bodies and they all had issues like this where the actuator wasn’t strong enough to hold the tb open. There are a couple people who lost motors because the Tb did some sort of reset calibration at WOT. Honestly the primary benefit of turbos and centrifugal superchargers imho is compressing the air before it gets to the throttle body so you can use a stock throttle body
Hey Alex, I remember Demonology had a similar issue. Turned out to be the electronic throttlebody couldn't handle the pressure so he had to go old school drive by cable. Hope this helps.
WHAT A VACATION...Very glad you took this direction with your content. Thanks Alex.
Great video! Very much appreciate the technical videos and illustrating the bumps in the road you encounter along the way and not just showing the clean finished product after install. It’s important to show that all this is not just “plug n play” as many will portray it to be. Please don’t stop doing what you do. Much continued success sir!
Glad to see new videos every few days along with the live chats on both channels. And still working full time at a 9-5. Hard work forever pays !
This is cool to see. Looking forward to the numbers when you're finished. Greatly appreciate the content.
you made my TVS car fast as hell so good you finally join the club
Nice choice Alex ! the vacuum reference line is connected below the supercharger pulley.
TVS The Canelo of blowers
ESS The Bivol of blowers😎
@@mikehughes8023 I don’t think that means what you think it does lol
@@Quawnn I think he does. ESS is an underdog and will smack up anybody if it’s built properly. Same with canelo and Bivol
5.4's and 5.8's just sound so much better than a coyote.
Gotta say I agree. One of multiple reasons I went with an 07 gt500. I have a gen3r on mine I can't say enough good things about the tvs. For a street car tvs all day every day and they can go quick at the track too.
Nicely done.
I'm a diehard whipple guy and I am looking forward to seeing the results when you get it on the dyno. Do you think you would get this TVS ported in the future? Not many guys are doing videos of each upgrade like you are with all your vehicles. Godspeed and keep up the good work.
Badass. Being that I have a 2.9 whipple gt500, this is very relatable content. Tig vision I think makes a battery/catch can that goes in the location of the stock battery, or just run breathers with sweat bands around them to prevent oil spray on the coil covers you know, foxbody style.
Bad ass brother can’t wait to see how she runs ….
Saw the golf carts creeping past and thought there was going to be a drive-by.
Now you need to take it to the track.
Holy shite Bicho! Your problem is that JLT CAI!
Damn Alex, you really know your shit. Very impressed!!!
Great video. Super excited for first driving impressions
Love the GT500 content Alex. That is such a cool car. Waiting on the Dyno numbers 🍿🍿
A little crank case oil blowing on your s/c rotors is good for keeping them lubricated... At least that's what my buddy's dad's uncle on his mom's side says
Always love the GT500 content!
Always like this channel but you just grabbed the next gear with these install videos. Great job!
Gotta take it to the track now and see how it holds up
You need a shorter bolt because it is clearanced to fit under the tvs. That's why vmp sold it with a tool and a shorter bolt. Good luck.
Man! TVS should be fun - great video 32 mins short for me but still greatly appreciate the info
Great job man! Interested in the dyno results. I'm a big TVS fan. We'll see 😂
Hell yeah! Looking forward to seeing the difference!
that guy to skid out around 26 min. Scared the shit out of me lmao
Twin screws are more efficient than roots style blowers so I dont see you making more power or even equal power by swapping. Also the reason the TVS is easier to rotate by hand VS the Whipple is due to the fact a twin screw actually compresses air inside itself so there is more resistance to rotation as you compress the air while rotating it.
Viejon tienes que reemplazar el enpaque
When I did my Longtubes, I had to remove both motor mounts and lower the engine, so I didn't have go drop the k member.
Can’t wait for the dyno pulls!
It looks like you had a bit of an easier time installing the ESS kit
Absolutely love this video
Love the vids recently, perfect content to watch while I eat my food haha
Right that's what I'm doin
“Don’t let size fool you” famous words I use when talking woman. 😂
Love the Gen3R. Stay safe
Great great.. 👌👌💥💥 this is cool. Lots of things to learn. TVS FTW 🤘Vacation well used..✌️
Barley getting in to having my frost blower ride. Should be between 6 and 7 rear wheel. Good enough for me in pump puss water.
very intresting.. sweet baby jesus.. you need to interview the lawn workers. does Alex have alopecia??
Keep Alex’s alopecia out your damn mouth. 😂😂😂
Used to have a 2.3 whipple on my truck, miss that. Has an s480 now and while it makes way more power, it's not a fun. Blowers on daily driver shit is > Turbo.
Not just daily drivers but street cars in general. People always use the term daily drivers but not all street cars are dailies but you still want them to drive nice on the road.
Blowers on a STREET CAR is > turbo
There fixed it for ya lol
@@midnight347 you are not wrong sir. And I appreciate the edit. The truck in the picture I do daily drive. Just not when it snows. I am in northwest Ohio after all. It's that or my LS swapped fairmont. Which I want to put a blow on...
Loving the content. Love the GT500 content. Even though you don’t like the car as much as the others.
The hate is strong for JLT in this video. lol. It's going to be cool to see what it was makes with the TVS. I wonder if it will make more heat than the old whipple.
This was excellent!
TVS Amry
TVS for tha win . I'm running similar setup GEN 3 vmp jokers ported built engine
Fuck yeah, Alex. Love this content.
Thanks for your awesome content 👍
Hey man if you ever need some help or pointers on how to reach certain bolts I'm sure Turvi can help now that would be the collab of the century lol
Great video!
Man I love that car! Same color as my boosted GT. What’s the beef with JLT? Someone explain the beef as I missed it. Can’t catch every live
In a nutshell the owner of JLT talked shit online when Alex and Lund parted ways years ago, and JLT in general seems to have questionable quality.
@@chrisromero2088 I thought that was BMR not JLT?
#FJT
@@markhutchins3643 BMR was the whole FKA situation. He addressed the JLT thing out right in the live where Gale Banks roasted JLT for their TRX intake testing
Yes
Those Foxbody wheels though 😍
Curious to see what kind of power the 2.65 makes versus the whipple. I currently have a 4.0 whipple on my built motor GT500 and have been considering swapping to a TVS or 3.8 whipple.
If your car is a street car first and foremost go with the gen3r and don't look back. They can still make ALOT of power but they feel 100x better on the street and more fun to drive in normal street driven rpm ranges.
@@midnight347 if you don’t have real experience don’t say that, i have a kenne bell 3.2 on mine , and my friend has a 3.4 Whipple, both are similar “friendly” when compared to the stock eaton M122.
With the efficiency that's TV's brings I think you'll be able to make similar power with maybe 30-35 less degree iat.
And the torque will be way higher and it'll be alot more fun to drive in the lower rpm range. They are just badass blowers.
I like this
Do you think the same or similar logic applies to the 2300 vs. 2650 Alex? As far as the “instant” throw into the back of the seat? … Looking forward to seeing the IAT numbers and the delta between these two blowers! I think the 2650 will surprise the party.
Love the content
Which company do you not like again at the end? Kenny bell or JLT lol
It’s runs like from factory awesome
When he says my people doing there thing. Fucking dead bro lol
Definitely curious to how the 60' is gonna change or change at all switching to something so much smaller but can whip up fast.
Hey Alex,
I have a gen3r on my built motor 2014 gt500. 2.4 upper and 10% lower with an 85.3" belt. I have the bps ac delete to install but can't find and belt length info. Do you know if the bps kit is the ac idler that you have installed? Thanks in advance and keep up the great content!
Thanks.
TVS the world.
That whipppl is looks huge compared to the vmp lol
Hey bicho what ever condo or town house complex you live in thats lets you have that many cars is gold bro down here in my miami its 2 cars per unit and if you have any others figure it out! 😂🤣
They don't care here. So far...as long as they are registered they don't care.
@Alejandro Flores gold brother absoulte gold.!
People were saying the zr1 needs a 3100, na the gt500 needs a 3100
Kennebell has the best supercharger
What is the 4.5 Whipple's rpm limit? I'm guessing it's not even close, maybe a smaller blower closer to the limit and great cooling could be better. My .02c, correct me if I'm wrong.
Hey Mr Alex, it’s ok we landscape now?
He needs #YDBT headquarters. So he can store his Dyno and get a lift. He has a fleet of cars.
Are you thinking of running the lines off the valve covers to a catch can instead of having oil sucked up into the blower???
Yes
Vmp best in the game imo
Getting a 2013gt500 what supercharger would u recommend me swapping the original one too and what should I do to it to daily and to have some fun
Loving the content 🔥
Will if fit a 19 gt
If all cars were fixed up to your liking. Which two cars stay in the garage?
Corvette and gt500
What you hiding in them jeans 👀
Ah yes back to a TVS 😎
its going to make almost 1200 whp on e85..
Borat voice: Very nice!!!..... I like.
Vmp tvs for the win
Get the fking head mount 😆 bicho 😆 🤣 😂
TVS 2650 FTW!!
What about a Kenne Bell? Do you have any experience with that SC?
Yes...i dislike them...Same thing....big massive ones make power by the tvs pound for pound kills bigger blowers output. But we'll see on this one
JLT huh…lol
💪💪
How much can I get the old head for?
The firewall has to be modified.
3500 would be what I'd like.
It's your throttle body 2.65 is weak
Niccccce
I think the larger whipple can do it without all the extra heat.
The larger Whipple had terrible iats
@@YDBT4LIFE So you mean to tell me the internet lied to me 😂. Let’s see what that vmp can do. I’ve never seen one in person.
💨🍂
What will you do with the hole in the firewall ?
he doesn’t reply to comments on yt
@@mmaraio_1250 but you do ?
Not a damn thing
@@MybackHurtz1 brody what does that even mean, i originally wrote the comment as a test to get him to reply to you
220 on tha dash pookie
TVS the world.
TVS the world.