Great advice and great video. Thank you so much for sharing, my wife has one of those little cars. I need to go fix it 😃. Thanks again like and subbed. 🙏stay safe dude. From the uk 🇬🇧
Great video, think I've the same problem, did you notice at 8:54 you'd bent the disc guard on refitting the ball joint ? you may want to check your rear axle bushes, at a guess these are also on their way out, if not knackered already.
Hello mate im from the UK i need both mine doing on my fiesta 2013 could you tell me about how long it would take a mechanic to do both as iv been told the garage would need my car all day now i know its not too long a job would i be right in saying about 2 hours .
@@FastEddieQ have been watching and does look easy enough but my biggest problem is my lower back i have very bad athritis and find it very difficult to bend down for any length of time if i had access to a car lift i would do my self.
IT'S OK BUT IT WOULD BE BETTER IF YOU SPRAYED WITH WD40 OR BENCINA THE PARTS THAT YOU CLEAN WITH THE WIRE BRUSHES. BUT VERY GOOD WORK. GREETINGS FROM LIMA PERU.
Any change to suspension components should be followed by an alignment check! Nice work though man. I like that you cleaned up surfaces and the ball joint bore in the hub, with a wire brush. Most people wouldn't do that.
Sir, im from india Thank you for a great video i also have the same problem in my ford all new fiesta 2012 model while turning right side in steering i heard some hissing noise and in off road path more sound in right wheel. Can i get your whatsapp contact number ???
Girinath, if you do some or a lot of off road driving, more than likely are going to be your Sway Bar Links front, check this out first, good lack.... don’t have whatsapp, but if question I’ll try to answer them here for you...
![*SUPER RARE* THE PARADIGM IS BACK?!?!? Fortnite Item Shop [August 6th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/ru6xSH1RaPw/mqdefault.jpg)
On screen bolt size, very helpful thanks!
Thanks for watching
Great advice and great video. Thank you so much for sharing, my wife has one of those little cars. I need to go fix it 😃. Thanks again like and subbed. 🙏stay safe dude. From the uk 🇬🇧
6:13 the swingarm has one hole for the screw, which is not round but wide oval for this you need to do alignment
Great video, think I've the same problem, did you notice at 8:54 you'd bent the disc guard on refitting the ball joint ? you may want to check your rear axle bushes, at a guess these are also on their way out, if not knackered already.
Thanks for the video
Thanks Eddie!
Thankyou
Clunking on load only front suspension side might be mounting but I can't see rips in it ? Yet it's free rubber movement ?
Greetings for you from Iraq
Greetings my friend
That's a good bit of rust there buddy
good one, I think you stay near the seashore lol!!
Why does the front look wide and bulky? Does it have a kit or something?
iPod video, however. Drive a large screwdriver into the gap on the ball joint ‘clamp’ and the ball joint drops out.
Pretty sure your meant to raise the arm to to travel height and torque the bolts the bolts to a certain nm and an extra 180 degrees
Do the bolts just tighten right Into the frame of the car?
Yes they do.
Hello mate im from the UK i need both mine doing on my fiesta 2013 could you tell me about how long it would take a mechanic to do both as iv been told the garage would need my car all day now i know its not too long a job would i be right in saying about 2 hours .
Hello to Uk my friend…. Brian if you have the tools to do it, you can get it done in 2 hrs. Max….
Unless shop has other things going on. But labor wise 2 hrs., For some one with out experience…. Good luck.
Do it your self, you will save big money, and os simple to do
@@FastEddieQ have been watching and does look easy enough but my biggest problem is my lower back i have very bad athritis and find it very difficult to bend down for any length of time if i had access to a car lift i would do my self.
IT'S OK BUT IT WOULD BE BETTER IF YOU SPRAYED WITH WD40 OR BENCINA THE PARTS THAT YOU CLEAN WITH THE WIRE BRUSHES. BUT VERY GOOD WORK. GREETINGS FROM LIMA PERU.
HEY MAN - uk SAYs hello!
Thank you Pablo and Smokemirrors
Peru klk
This is a control arm replacement video.
Any change to suspension components should be followed by an alignment check! Nice work though man. I like that you cleaned up surfaces and the ball joint bore in the hub, with a wire brush. Most people wouldn't do that.
Thanks 👍
My 2008 fiesta don’t have that much rust as your car, where you from bro
Wisconsin
Sir, im from india Thank you for a great video i also have the same problem in my ford all new fiesta 2012 model while turning right side in steering i heard some hissing noise and in off road path more sound in right wheel. Can i get your whatsapp contact number ???
Girinath, if you do some or a lot of off road driving, more than likely are going to be your Sway Bar Links front, check this out first, good lack.... don’t have whatsapp, but if question I’ll try to answer them here for you...
Rename your video
What do you have in mine
@@FastEddieQ Lower arm replacement