Installing rear view camera - Peugeot 308
HTML-код
- Опубликовано: 23 июн 2019
- Installing rear view / reverse camera - Peugeot 308 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Buy rear view camera from Aliexpress:
- Universal rear view camera: s.click.aliexpress.com/e/_DlD...
- Dedicated Peugeot Citroen rear view camera fisheye: s.click.aliexpress.com/e/_Ddp...
- Dedicated Peugeot Citroen rear view camera: s.click.aliexpress.com/e/_DcH...
- Car Number License Plate Frame with Rear View Camera: s.click.aliexpress.com/e/_DCj...
Buy car parking sensors:
- Rear parking sensors with display: s.click.aliexpress.com/e/_Dl2...
- Rear parking sensors with buzzer: s.click.aliexpress.com/e/_DFR...
- Rear wireless parking sensors with display: s.click.aliexpress.com/e/_DCM...
Buy Android multimedia unit for:
- Peugeot 308 Android, 7 inch, IDOING: 4 Gb RAM, 64 Gb ROM s.click.aliexpress.com/e/_DkI...
- Peugeot 308 , 9 INCH Android Version for Peugeot 308: s.click.aliexpress.com/e/_A03aHR
- Peugeot 307 Android, 2 Gb RAM & 32 Gb ROM (Europe warehouse): s.click.aliexpress.com/e/_ADahhf
- The best Android unit for Peugeot 307, 4 Gb RAM, 64 Gb ROM: s.click.aliexpress.com/e/_ADgIk1
- Peugeot 3008 Android: s.click.aliexpress.com/e/_9Hy8b7
- Peugeot 207 Android 7 inch: s.click.aliexpress.com/e/_AeiHQN
- Peugeot 207 Android 9 inch: s.click.aliexpress.com/e/_AgLXi5
- Peugeot 407 Android 7 inch: s.click.aliexpress.com/e/_AmNf25
- Peugeot 508 Android 9 inch: s.click.aliexpress.com/e/_AVUrJx
- Peugeot 206 Android 7 inch display: s.click.aliexpress.com/e/_9Q9pOH
- Peugeot 206 Android 9 inch display: s.click.aliexpress.com/e/_AApa4z
How to remove original Radio Unit Peugeot 308: • Peugeot 308 - Audio un...
➢ If you like, you can buy me a coffee: paypal.me/adioperator?locale....
➢ Facebook: / psadiyrepairs
Comment, Thumbs up, Share, and Subscribe!
Music:
ONE by Lahar / musicbylahar
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/ONE-Lahar
Music promoted by Audio Library • Video 
Авто/Мото
Links:
- Dedicated Peugeot Citroen rear view camera fisheye: s.click.aliexpress.com/e/_DdpTf6d
Thank you very much for the subtitles!!😉🙃
Bun video . Foarte bine explicat . Multumesc!
Îți mulțumesc mult 😍 mai ajutat sa înțeleg cum se montează camera off😁😉
Multumesc frumos. Foarte bun explicat.
Super video,,,chiar ma motivezi,,,,cred ca ar prinde bine un video despre izolare fonică a porților,,,(presupun ca nu ai făcut unul),,,,respect.
I also installed a rear camera. But then on my Peugeot 308 SW II from 2016, a newer model then in this video. It was a lot of work to get it working so I like to share my findings with you:
I used an Ebilaen AA/CarPlay module. Adrian posted another video about that topic which I used. Many thanks! And a Smartour 1080p camera. For installing a rear camera on a newer Peugeot model I used a video of the Do It Yourself guys. I found out as explained in that video that I had to use a relais to make it work since the voltage was varying between 12V-14V (so even above the 12V use a relais). They don't explain it in that video but it does matter to which yellow cable of the two cables of the relais you connect the - and signal/reverse light. Check Google for an image of how to connect the cables to the relais. Next, I also found out that I had to use the small red cable attached to the video cable. So don't cut it off! I had to connect it to the REVERSE input cable on the back of the Ebilaen module. This provides the module the signal that the car is in reverse. At first I connected this cable to the reverse light cable but as said earlier the voltage was varying too much. Therefore I connected the tiny red REVERSE cable to the + cable of the relais which also goes to the camera. And then it worked!
Turn off OEM|Aftermarket camera in the main menu under settings > car. Finally, the guide lines on the screen were opposite to that my steering wheel was doing. Go to Front View in the main menu and change View to Normal of Reverse.
Hopes this works for you. Cheers!
Thank you very much for telling us about your experience. I already have the camera from the factory on my Peugeot 308 II 2017 and I haven't installed the camera yet, but I will still have to pull that trigger cable from the rear lamp to automatically switch to the image of the reversing camera.
Thanks!
Hi Adrian thx for the tuto you really helped me !!
Perfect video!
Salutare,ff frumos chiar voi monta si eu asa ceva pe opelu meu ,interesant si frumos tutorialul,mult succes in continuare .
Salut! Multumesc pentru aprecieri!
Great videos. thanks 🙏
Bravo Adi!!!!
iti multumesc din suflet
Super!
Bv
Felicitari si respect!
Multumesc!
i like your car!
Nice. Job well done :-)
Very nice job. I'll try it on my 3008
Respect from Russia
Super video, thank you. One question : my bip are stopping working when I connect the camera. I'm unable to reactivate them. Do you know what's happening?
Nice video！
jak Ci sie udalo zdjac plastykową osone z tylnej belki bagarznika??
Great vid! I’m super interested as to how you managed to work away the parking sensors screen inside of the seatbelt information display. Are you planning a tutorial on that?
Hello. I didn't have that led screen and support for the belts. A few years ago I was looking for parking sensors that would fit in that bracket, I bought the bracket from a broken car.
Thanks!
These videos are great. They give me the “confidence” to decide to do this myself. I noticed you solved the problem where the top of the android radio did not align with the panel.
Is it possible you can describe how?
I changed the Android unit, see here: ruclips.net/video/iwpm0O85f1Y/видео.html
😮😮ef😮😮f🎉f😮😮f😮😮FF😮Fff😮ff😮😮😮😮F😮😮FZ😮😮ff😮😮f😮😮xaffxff😮xFFf😮x😢😮zz😮zx😮😮😮FFfFx😮😮fFfFF😮F😮😮Ff😮😮fFf😮F😮FFfDFfffF😮Fx😮😮😮fF😮😮FfFFfFfff😮fFFxFDZFFFffzFfFFfzfFFFF😮😮F😮fFfFFF😮FFff😮😮X😮😮F😮😢f😮😮f😮F😮😮fz😮😮😮😮fR😮😮F😮😮g😮f😮z😮f😮fz😮ffFFfxfFFzffFfFzFFFFFfFZfzxfffFFZXXFffX🎉😮Fzf😮😮z😮f😮z😮FGfXFF😮zFF😮😮😮?fF😮F😮😮f😮F😮😮FrrFxxffxfx😮😮fd😮z😮z😮xf😮😮🎉😮ff😮ff😮FzfFffff🎉😮😮😮fFzfXF🎉🎉FXRFFFff😮f😮😮zfffffffgffffxFfFxf0g0frffxffffffffxffxxf06x4x55 😮xx😮x😮x0x5rff4x5x5fxf😮🎉😮x5g😮😮😮0😮x🎉😢🎉🎉f😮😮😢f😮ffxxxxx😮xfxx🎉x0x000x🎉fxfxx444fx4x!x!!ff4r🎉50f0fxc0cff05fxf😢fxfxfcff🎉 !! 😊😊😊😊😊😊😊dxdf😊f😊dxf😊😊😊fffffxffffxtfcxccxfxcxfcyxcffxffx😊fxxxfxxxxxfffxfff😊ftgffxxf😊ffxfcxxxxf?ccfyy😊zzf! 🎉xfxf😊😊😊cffxcfs😊xfccfcfffcff😊😊😊😊😊😊😊ssddd😊😊😢x5fxfxcx000😮😮x8😮cf😮😮xx😮😢😅f😮x😅 🎉🎉😢🎉🎉😮f🎉x🎉🎉🎉🎉🎉🎉🎉🎉5😮😮😮😮😮🎉😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😊😮😮😮😮
Thank you for thé vidéo bro
You're welcome friend.
Great video Adrian, thanks. Can you tell us where did you buy the feet covers/carpet in plastic to match 308 (I can't find ones that fit the driver seat..), thank you so much.
I bought it from a local store, the carpets are specially made for Peugeot 308. I think you can also find it at the Peugeot dealer. Thanks!
You can do without them at all. Are so heavy!!! Boost the car, decrease consumption.
Hi Adrian,
Thanks for the tutorial. I've installed the android unit so far with your help .
If I power the rear view camera using the head unit, do I still need to get the signal from the reverse light in order to make sure the camera only activates when the reverse gear is selected?
Hello. You can power the camera from your Android device, but the video signal may be interfering, but you can try. If the image is affected, power up the camera from the reversing light.
I think the best option for camera is the cameras that came glued in the licence plate light. Because you dont have to drill.
Yes, that's right, but I didn't have such a camera.
Installing rear view / reverse camera - Peugeot 407 pls
Brilliant
Please do the same video with front caméra ...thanks
19:22 How did you change so that Radio Station name shows in the bar at the bottom ( favorites ) ?
This Android radio has RDS (radio data system) function through which it automatically takes the name of the radio station.
Hello Adrian. Thanks for your videos, they are very helpful. One question, is it normal that when installing the rear camera the automatic rear wiper stops working when activating the reverse gear? Thanks and greetings from Spain.
Hello. I don't think the rear camera has anything to do with the rear window wiper. Does the same thing happen if you disconnect the camera?
Salut Adrian, super tari tutorialele tale! Felicitari!
O intrebare - la un Peugeot 308 SW cu Connect Navigation (RT6) , pot lega o camera marsariere care sa dea imaginea pe acel ecran retractabil? Multumesc!
Salut, multumesc pentru aprecieri!
Daca au fost masini echipate din fabrica cu camera de mers inapoi teoretic ar trebui sa poti face aceasta instalare dar nu stiu sa-ti dau mai multe detalii tehnice. Probabil trebuiesc facute niste configuratii in softul masinii.
Hey! Very good video how to connect camera in the car. Have plugged the camera into a golf mkv5 2008 and assume it works the same as on your car. The problem when I put in (reverse) is a yellow warning symbol and no picture I get = (don't really know what is wrong. Should I disconnect both GND cables it from the camera and the spm is behind the stereo for it to be picture? when you connect the yellow video cable it says on your cord (BACK V IN) on my iso cable it says (F CAM-CVBS) can it be because it is not connecting ?
Hi! But are you sure your camera works? I had a problem with a camera that didn't work, it didn't send any video signal.
@@AdrianDragan the camera works, I have switch the iso cable to another that have CAM IN and it work when i turn the key to half signal but when i start the car it turns black and no picture..any clue what it could be?
I am currently considering doing this to my 106, but I am really struggling with the camera placement as my number plate and lights for it are attached to the boot but the reverse lights are not. My problem is the interior of the boot is metal and I would have to run the power lead to the reverse light up through the boot and back down the inside of the rear of the car. Is that advisable or is there a better way I haven't thought of?
Hello. I don't think you have any other option but to pull the cable through the trunk door and then go to the reversing lamp, I think this would be the best option.
Hi Adrian,
I really like your Peugeot videos, they are of such great help!
At the moment, I'm trying to install a rear cam myself here on the 308. My cam is a variant attached to a license-plate light. However, that version has the video cable on the inside of the light, so any cabling must go somewhere along the inside of the bumper.
Is there a trick to make a cable go from, say, the left rear light to right over the left license-plate light without taking the whole bumper apart?
The license-plate cam seems so widely used, so I bet someone must have done it on a 308... I appreciate any tips here :)
Thanks, Sascha
Hi Sacsha. There may already be a hole in the bumper behind the license plate number, so you can use that one.
@@AdrianDragan Thanks man, will check that asap. Frigging cold outside, not too keen on taking too many things apart... :D
Thank you for showing the video. Is there another way we can expose the cables without drilling the car bumper?
Hello! Check behind the number plate if you have a hole in the bumper. Usually there is a hole and you can go through the cables.
ADRIAN good morning i need your help my son bought a used 308 1.6 hdi year 2009 the 2 lights of the licence plate are not lightning there is no current.... the other lights are ok...there is an alarm in the wip nav of side lamps fired or malfunction...are these two lamps directly connected to the BSI? i think there is no fuse for this lamps.or are connected with the rear side light?thanks a lot from italy!!!
Hi Bruno. I don't know if the number plate lamps are with or without fuse. However, put on new light bulbs and check after a few minutes if lights up with the car switched off and the engine switched off. The error from wip Nav may occur from a plug with some problems, see in my video: ruclips.net/video/nPayv1YnJ0k/видео.html
My camera’s cable has to go to the upper place where you screwed the screws of your camera (so the “roof” of that small area, where you made a marking with your screwdriver). If I drill upwards like that, would the cables go to the bottom of the car, like your cables did? I should mention I have 2008 Citroen C4, pretty similar to Peugeot.
Hi. Yes, because that area is free.
Adrian Dragan Hi again, sorry to bother you with this again, but I wanted to make sure that if I drill UP here (marked green X in the picture below), it is empty on the other side on my 2008 Citroen C4? imgur.com/a/3Nfs6bP ... I also have to reach that drilled part from other side and screw with my hand from the other side, would that be possible? Just a hand screw, no tools needed. It’s this camera on Aliexpress (see link below please). Thank you so much in advance!
a.aliexpress.com/_mNPS1O7
@@uygar84 Hi. The best option to find out if it is safe is to get under the back bumper and see if you can damage something or not. I think that camera is good.
Is there any difference between powering the camera by head unit of back light? I brought the one that goes inside plate lights.
Hi! I prefer to power the camera from the taillight on the reversing light.
Super🇵🇱
Hi Adrian, do you have or can you make a video explaining how to install the aftermarket parking sensor please.
Hello. I will do a tutorial on how to install rear parking sensors on the Peugeot 307, it's about the same for the 308.
@@AdrianDragan do you have the video?
Does it have problems with canbus? Giving lamp faulty when you connect wires to reverse light?
How you connect the power other way that you mentioned? Option to connect power to head unit?
You don't get any errors on the cbus, everything works perfectly. You can power rear view camera from the Android unit on the "Reverse" wire.
Today I have installed it on my Peugeot 407. Many thanks for help, it was easier for me to connect iz to the Reverse wire on head unit. No errors. It looks amazing. Only difference is that i have drill the hole for the whole Camera.
Super! Multumesc! In sfarist am gasit la tine explicatia ce trebuie facut cu cele doua capete de fir rosii de pe cablul de semnal video. Asadar, daca alimentez camera direct de la firele de alimentare ale farului de marsarier, si daca alimentez ecranul de la bricheta (eu nu am navigatie la masina), acele fire rosii de pe cablul de semnal video cu mufe RCA galbene nu sunt necesare.
Acel fir rosu se conecteaza la monitor si la sursa de alimentare a camerei ( plusul lampii de mers inapoi) doar dacă monitorul are nevoie de acest lucru pentru a detecta primirea semnalului video.
Hi Adrian.
Once again, thanks a lot for another great video! Very helpful. As I mentioned in another video, I bought a Mekede M300s unit. I also bought a rear camera from them. It seems to be easy to mount the camera, but I also wanted to mount rear and front parking sensors (the car doesn't have it yet). The system (mekede) seems to be prepared for those, because when I put the rear gear, it showns a screen like the one in this video, where I should see the camera image, but it also has a side image with a car having 4 radars in the front and 4 radars in the back. What I find strange is that the unit's wiring diagram only shows how to connect 4 parking sensors, 2 on the back and 2 on the front. Do you know if this is correct? If so, where should the sensors be placed? For me it would make much more sense to have 4 on the back and 4 on the front, but I can't understand is this is possible.
See here an image explaing what I just said -> ibb.co/pWSx39X
In that picture are the audio outputs. The Android unit will display only the original parking sensors, the data from them being received through the CANBUS protocol.
@@AdrianDragan so what can I do to integrate also parking sensors in this android unit? Can I, maybe, buy one of those kits that receive signal from 8 sensors and also a camera, and send the image to a monitor, and instead of buying a monitor, send the image signal to the android unit using the AV IN?
awesome video as always, keep up with the modification
any plan for changing the headlight (halogen) to HID with projector lens?
Thank you for the appreciations,
Changing headlamps can not do it because it is forbidden in my country to change over the lights with others that did not have the car in the factory. A solution would be a retrofit with original pieces, but it is far too expensive.
@@AdrianDragan thank you for quick reply and clear explanations. another question i have is, how to change the fuel filter? 😄 Wish you have a nice day and keep on posting new video. Love from Malaysia👍
What engine?
@@AdrianDragan 1.6 VTi petrol
@@AsrafProtas 1.6 VTi petrol facelift does not have fuel filter :o
Hello my friend. I want to install parking sensors on a Peugeot 307 and I would like to ask you if you know which wire is possitive and which wire is negative.Thanks
Hello. Check with a multimeter the positive and negative of the wires. With a little attention you can follow the wiring leading to the reversing light bulb and from there you can figure out which is positive and which is negative.
Nice video Adrian!
Is that a factory sound insulation in your boot and under the rear seats or you set it up. My 308 2008 car doesn't have these.
Hi! I put on that sound insulation, it didn't have that in the factory.
Thanks!
@@AdrianDraganhello does it work great for sound reduction?
@@loicthenault3399 Hi. It is a good addition, it also reduces the rolling noise that is heard on the rear seats.
@@AdrianDragan last question does the original 308 park sensor work with the m400 ? Thanks 😃
@@loicthenault3399 My car does not have original parking sensors from the factory, but in the comments I read that it works.
Nice and thank you. Link for parking sensors? What do you think about frames for plates with camera? And rear camera is only activate when you in revers position?
Hi,
I just added links to parking sensors in the video description.
I did not test the camera with plate frame but it should be ok and those. And for this I added a link in the description.
Yes, rear camera is only activate when you in revers position.
@@AdrianDragan thank you. Nice chanell. Briliant.
Would you recommend wired or wireless on a 308 sw since, on the sw the number plate goes up when opening the boot?
Hello! The cable connection is the best. However you need power for the camera, you will still need to pull a cable from the reversing lamp to the camera.
@@AdrianDragan can't i use the power from the stereo?
@@jangaardsdal1684 Stereo cannot power the reversing camera, so I recommend powering from the reversing lamp.
@@AdrianDragan hey again.. I have a follow up question. When using the wired version, the signal i really bad, its black and White with alot of lines distorting the picture, if i plug the camera to av 1. On the unit, the picture is just as bad.
When i use the wireless, the screen flickers and goes green.. So for me it looks like a faulty camera? Or am i missing something? When powered the Led lights up.
Br
Jan
@@jangaardsdal1684 Hi. I think you need to change the reversing camera.
Adrian ,I think 7 inches looks better to our center dashboard..I am about to install one my self..
Hi. The 7-inch unit fits perfectly in the dash, but I'm very happy with my new unit with a 9-inch screen: photos.app.goo.gl/PGmjBEYuuAVc3pWy5
salut adrian.am o mare rugaminte.poti face un clip cum se regleaza cablul de la frana de mana?
multumesc din suflet
Salut,
Am pe lista de asteptare un clip despre cum se regleaza cablul franei de mana, dar va fi facut prin toamna deoarece atunci am in plan o revizie generala a sistemului de franare pe spate.
Explicat bine
Hi, I attached the rear view camera wired to the reverse light as youve shown. But now my rear indicator/blinker for that side of the car no longer works and the indicator for that side blinks faster than usual.
Hi, Probably after a few hours of parking it will work normally.
@@AdrianDragan No it did not. Looks like I had to run the negative wire to ground and that worked
@@bro.eddieboycalaguas8105 So now it works :)
Hello Adrien. Can you tell me which would be the best camera for my Peugeot 308 Sw? I bought the camera just like yours but there is no space next to the license plate, I need one that is compatible for my car. Can you help me?
Hello! What year is your car?
@@AdrianDragan It's from the year 2009. Thanks.
@@hugoribeiro2429 Hi! I don't know which one would be the most suitable because I don't have a 308 SW. But some pictures from that license plate holder may make me understand which camera is best for your car. You can send them here: facebook.com/psadiyrepairs/
Hello Adrian.
I installed a camera identical to yours in my Peugeot 308SW year 2009 but if I activate the reverse gear and give the turn signal where I have connected the camera, does the turn signal stop working? Can you help me solve the problem?
Best regards.
Hi Adrian amazing channel mate! Can I ask for a link about a Peugeot 308CC model 2009 please?
Hello. Look here:
- Peugeot 308 Android Multimedia 7 inch: www.aliexpress.com/item/32959503961.html?aff_fcid=fb3a1b34250f4af0afbfeec0102f79ad-1616413294253-02503-_9xZIBg&aff_fsk=_9xZIBg&aff_platform=shareComponent-detail&sk=_9xZIBg&aff_trace_key=fb3a1b34250f4af0afbfeec0102f79ad-1616413294253-02503-_9xZIBg&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail
- - Peugeot 308 Android Multimedia 9 inch: www.aliexpress.com/item/4000594496152.html?aff_fcid=939465d8baed46f1b7b4d457aae0905b-1616413515998-02871-_dWTap1F&aff_fsk=_dWTap1F&pvid=da6772df-129f-491f-be4d-5662cc3ed48e&aff_platform=portals-tool&sk=_dWTap1F&aff_trace_key=939465d8baed46f1b7b4d457aae0905b-1616413515998-02871-_dWTap1F&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8
- Dedicated Peugeot Citroen rear view camera fisheye: www.aliexpress.com/item/33009578703.html?aff_fcid=80f0c99cd7cf4d7cb246d6ce7ff31edb-1616413347603-02703-_AOmJWi&aff_fsk=_AOmJWi&aff_platform=shareComponent-detail&sk=_AOmJWi&aff_trace_key=80f0c99cd7cf4d7cb246d6ce7ff31edb-1616413347603-02703-_AOmJWi&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail
@@AdrianDragan Thank you very much and how to install the parking camera? Is there a video?
@@Mosxovits For the Peugeot 308 CC I don't have tutorial
@@AdrianDragan does this camera work with the M500 Mekede, and Peugeot 308 CC 2009?
Great vid! What are those two tools you used to take the Android unit out of the dash?
Hi. You need two screwdrivers suitable for those holes.
@@AdrianDragan cheers I ended up using 2 Torx keys. Did your reversing camera app open automatically when putting the car in reverse? 👌
Yes, the application opens automatically when I put the reverse even if I did not connect the camera.
@@winstonnugara5226 Yes, the camera application opens automatically when I put it in reverse.
Salutare Adrian... Foarte frumoase și bine explicate clipurile tale... După explicațiile tale am montat unități android în doua Volkswagen-uri și mâine urmează sa îmi instalez și eu în mașina mea (citroen c4) unitate android și camera mansalier 😇😇.... Legat de chestia cu unitatea android montată într-un VW.... Are o mica problema.... Descarcă bateria mașini...(dacă sta 3 zile parcată rămâne fără baterie) Oare sa fie problema de fabrica? Sau nu am făcut eu ceva bine? Dacă poți sa răspunzi te rog la comentariul asta as fi onorat...
Mulțumesc pentru explicații... Ține-o tot asa... Multa bafta 👏🏻👏🏻
Salut! Mai multi utilizatori au semnalat aceasta problema la masini din grupul VAG cu unitati Android. Eu nu stiu o rezolvare exacta dar se pare ca problema ar fi de la un Gatway Can care trebuie updatat, nu stiu in ce consta aceasta procedura. Vezi comentariile din clipul in care am instalat unitatea pe Pasat B6.
Succes si tie pe mai departe :)
dar teoretic se desface capacul de la schimbator si are reglajul acolo?
sau e altfel?
Reglajul nu este acolo. Trebuie sa demontezi scrumiera pasagerilor din spate, scoti suprtul scrumierei tragand din partea de jos apoi vezi surubul si piulita de reglaj. Nu uita ca trebuie sa ai 2-3 scaturi libere pana cand frana de mana incepe sa actioneze. Succes!
photos.app.goo.gl/guQHu9X4p5m4v25T6
Salut Adrian,am montat pe golf V o camera de marsarier si am o problema,ea este activa doar pe contact,iar cand pornesc motorul nu functioneaza !Ma poti ajuta cu o parere un sfat!Multumesc.
Salut. Am vorbit pe pagina de Facebook :)
Salut, de unde stie navigatia ca ai pus in masarier ? in acest caz nu trebuie dus plus din spate pe firul mov ?
Salut. Prin sistemul can unitatea radio primește semnalul ca a fost introdusa treapta de mers inapoi. Decodorul canbus ce-l primești odată cu unitatea Android transmite semnalele primite către tableta Android.
@@AdrianDragan Am inteles . si daca nu e integrata in can ? trebuie dat plus 12v pe firul mov ?
Dacă vei cumpara o navigatie dedicata va veni sigur cu un decodor canbus care știe sa facă trecerea automat pe camera de mers inapoi.
@@AdrianDragan chiar daca nu e montată camera , navigația tot ar trebui sa treacă meniul de cameră?
Da. De obicei în menu ar trebui sa ai o optiune pentru dezactivarea acestei comutare automate dacă nu ai montat camera de mers inapoi.
Salut Adi, în primul rând apreciez videoclipul și modul în care ai explicat fiecare pas. În continuare aș dori să vin cu anumite adăugiri: MARE ATENȚIE! Firul roșu de la RCA (cablul galben prin care se transmite semnalul video la navigație) este firul de TRIGGER, ce înseamnă asta? El trebuie legat la alimentarea camerei și la cablul BACK din mufa navigației (acolo unde ai spus ca nu mai faci conexiunea deoarece ai făcut-o la becul de marșarier), deoarece prin primirea semnalului de tip TRIGGER navigația va trece automat pe cameră în momentul în care va primi semnalul becului de mers înapoi, în caz contrar (dacă nu conectezi firul de TRIGGER), da, camera merge, doar că navigația nu va trece automat pe ea. DIN NOU ATENȚIE acea conexiune despre care vorbesc se face doar în cazul vehiculelor care nu dispun de CAN-BUS. În cazul în care vehiculul are CAN-BUS ceea ce ai făcut este absolut perfect.
În incheiere doresc să specific că nu e o critică spusă în nume de rău, sunt doar anumite specificații care pot fii de folos unor persoane care doresc să facă acest lucru.
Salut Alex, apreciez comentariul tau si este unul cat se poate de corect. Este adevarat ca nu am specificat faptul ca acel fir rosu nu se conecteaza la navigatie decat daca unitatea Android nu are decodor CanBus. Multumesc pentru observatie 👍
Am si eu o problema cu camera, ea fuctioneaza doar cu contactul(motorul oprit)cand pornesc motorul si bag marsarier nu mai fuctioneaza!Imi poti da un sfat?Este montata pe un golf V
Mulțumim Alex,de apreciat com. tău, urmează să montez pe un passat b5, fără can-bus și pe o insignia,care are comenzile pe baza cam-busului.
Salut Alex ma poti ajuta si pe mine? Am o navigatie Xtrons pe un bmw e46 , navigatia are CAN-BUS eu am legat camera pe tripla a mers cam 2 ani (mentionez ca atunci cand porneam luminile camera isi pierdea din semnal, se vedea doar ca pe navigatie facea dungi) acum de doua zile nu mai merge, nu mai intra in camera si nu inteleg de ce. Multumesc
Am probat și eu o cameră ( încă nu am montato) și nu funcționează...eu nu am legat nicăieri firele alea roșii care tu le-ai tăiat...crezi că trebuie legate și el undeva ?
Salut! Pe ce masina, tot 308? Cand bagi in marsarier navigatia trece automat pe camera chiar daca aceasta nu este conectata (apare acel ecran negru) ?
@@AdrianDragan Logan 2...nu apare nimic când bag in marșarier
@@danielhusi Ok. Trebuie sa ai un fir rosu ce vine in ambele capete ale cablului pentru semnal video (cel care aduce semnalul de la camera spre unitatea Android). In capatul dinspre camera acel fir rosu se leaga la plusul de alimentare a camerei (plusul becului de mers inapoi) iar in celalalt capat de la unitatea Android firul rosu se leaga la cablul ce iese din unitatea Android si pe ca care scrie Reverse IN. Am senzatia ca ti-am raspuns si pe un grup de Logan pe facebook :)
Salut. Vin cu o intrebare. Am achizitionat o camera se bord cu tot cu camera de mansarier dar am si o navigatie si as vrea sa conecte camera la navigatie.. am fost la un mecanic care se pricepe pe partea electrica si mi s a spus ca acea camera nu corespunde cu navigatia. Aceasta are android. Voi ce stiti e posibil asa ceva?
Salut. De obicei camerele pt spate care se conecteaza la o camera de bord nu sunt compatibile cu unitatile Android. Dar o camera pentru spate ce sa mearga pe Android este cam 10 usd, eu spun ca nu e prea scumpa.
Can someone tell me which display and cam i shoud buy?
Hello. You can buy from here:
- Rear view camera: s.click.aliexpress.com/e/_9Gbysz
- Android tablet 7 inch for Peugeot 308: s.click.aliexpress.com/e/_9RduDn
- Android tablet 9 inch for Peugeot 308 (recommand L4 carplay version) : s.click.aliexpress.com/e/_AALkWp
Salut, am cumpăr masina deja cu senzori dar fostul proprietar a rupt monitorul acela de la ei, de unde as putea cumpara unul pentru 8 senzori?
Salut! Nu cred ca vei gasi acel monitor separat. Cel mai probabil va trebui sa cumperi un set nou de senzori + ecran.
Salut . Cum am putea lua legătura , mi-am comandat și eu o cameră cu tot cu display . Aș mai vrea ceva delati dacă mă poți ajuta și nu deranjeze .
Salut,
Trimite-mi un mesaj pe pagina facebook.com/psadiyrepairs/
Buna ziua , la Peugeot 508 2016 merge montat o asemenea camera , Menționez ca Navigația e originala a mașini
Salut. Din ce stiu ar trebui sa mearga dar numai cu o camera originala si cu ceva activari facute cu diagnoza originala.
I didn't see the camera at the back, if it is shown, can someone give the time stamp please.
Hello. See at minute 19:30, above the registration number of the red car, the image on the top right.
Salutare, pe unitatea originala funcționează camera? Mulțumesc
Salut. Camera functioneaza doar pe unitatea Android.
Nu am inteles culorile:rosu,galben,verde.
Nu ar trebui sa fie gen: verde galben rosu!? Din fata parchezi spre spate,ci nu invers..nush zic si eu,si eu urmeaza sa montez camera,o am doar ca mie groaza :) ms mult de informatie!
Salut. La ce culori te referi?
FOARTE FRUMOS
Salut pot sa mi spui și mie de ce nu mi merge camera automat ?și trebuie să o activez manual ,
Salut. Ce masina, din ce an este si ce unitate Android ai?
Buna Adrian!de cand cu experienta cu lumina de marsarier ,ma tot gandesc sa pun o camera in spate,asa ca mi-ai citit gandurile.
Ca intotdeauna un video excelent din punct de vedere didactic si tehnic.
Salutari!
nu vad cat costa
Salutare . Cum pot intra in legătura cu tine ? Mulțumesc anticipat !
Salutare. Da-mi un mesaj pe Facebook la adresa facebook.com/profile.php?id=100082513732015
sau pe adresa de email pgt.adrian@gmail.com
Bună,am o Skoda 2 cu navigație originală oare pot monta cameră pentru mers înapoi , mulțumesc anticipat
Salut. Depinde ce model de navigatie ai si daca suporta intrarea video, chiar daca suporta aceasta functie va trebui activata cu VCDS.
Where you buy for headunit ?
From here: www.aliexpress.com/item/32959503961.html?aff_fsk=_9J2FXP&aff_platform=shareComponent-detail&sk=_9J2FXP&aff_trace_key=df563d154d59414896946fbffccdd3f3-1613215169332-05693-_9J2FXP&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail
Salut, cine deține 308 2011 când o deschideam din cheie se aprindeau farurile, acum nu, știe cineva de ce sau ce am de făcut???
Salut. Probabil ai dezactivat opțiunea "follow me home" din computerul de bord. Vezi sa ai și luminile setate pe mod automat.
@@AdrianDragan sunt 3 opțiuni în computerul de bord toate 3 bifate, nici pe auto nici pe lumini de întâlnire, pe nimic nu se mai aprind când deblochez, de ieri, pana acum se aprindeau, mulțumesc frumos de răspuns
Behind license plate, there is a square hole, so no need to drill. ;)
You're right, but it's possible that the non oe (aftermarket) bumpers does not have that hole in the factory.
Hello. Whats name of screen. Looks good!
Hi,
This is : www.aliexpress.com/item/32959503961.html?scm=1007.22893.149155.0&pvid=599dfe45-8e76-4ca4-be03-fed8e37654bf&onelink_page_from=ITEM_STORE_DETAIL&onelink_item_to=32959503961&onelink_publisherid=122285770&onelink_memberseq=122285770&onelink_duration=0.855115&onelink_status=noneresult&onelink_item_from=32959503961&onelink_subid=NULL&onelink_page_to=ITEM_STORE_DETAIL&aff_request_id=d074849a329849509b1814996bc8862e-1582968672313-05218-b515H2e8&aff_platform=link-c-tool&cpt=1582968672313&sk=b515H2e8&aff_trace_key=d074849a329849509b1814996bc8862e-1582968672313-05218-b515H2e8&terminal_id=1caff12f1f9d493691c33a5a59bc05ab
Și de ce nu ai mers pe varianta dedicată Peugeot?
Salut eu am facut la fel legaturile si am aceasi unitate ca tine ,dar nu cupleaza automat pe ecranu masini trebuie sa intru din unitate pentru a vedea camera .mufa a fost legata bine pe unitate camera merge dar nu comuta automat.ce pot face?.Multumesc
Salut. Vezi ca undeva in meniul Factory Settings este o optiune pentru activarea camerei de mers inapoi, parca se numeste "Prohibit Reverse". Schimba setarea de acolo daca o gasesti.
@@AdrianDragan multumesc pt raspuns pa na la urma am facut legaturile folosind si acele fire rosii care tu le-ai taiat si e totul ok.
@@lacatusumarius1805 pai si unde ai legat firele alea?
Salut, esti din Bucuresti ?
Salut. Sunt din Tulcea.
How can I set the android drive so that it displays automatically the video window when i set in reverse gear? Because by mine it do not switch to the video window? Please help Adrian
Hello. For what car and what type of Android drive?
@@AdrianDraganFor the same car and the same android drive
Search the menu for some settings to enable or disable rear view camera, search also in Factory Settings. If you can't find it, ask the seller, I hope he can help you.
@@AdrianDragan In the settings it is all Ok. The rear camera in the factory settings is enabled. I have not installed the camera yet. I will install it tomorrow, I hope that it switches then automatically to the camera window. Because now it does not switch to the camera window and it also does not show the black screen with the triangle in it like in your video before you installed the camera.
@@sinopluu5738 It should normally look like a black window when you step back. Tell me if you installed the camera and if it works.
Are those aftermarket sensors?
Yes, sensors are aftermarket.
Got it. I have factory sensors. I did install rear view camera. Your video helped alot to make this task fast.
Foarte util video!am urmat aceiași pași de montare a camerei pe un Ford Fiesta dar nustiu de ce nu mi afișează imaginea pe ecran. Navigația este una cu android și am folosit întrarea ccd avin.Ma poți ajuta cu vreun sfat?mersi!
Salut! Cand bagi in treapta de mers inapoi apare ecranul negru ce corespunde afisarii camerei de mars inapoi?
@@AdrianDragan Nu apare.Camera pornește fiindcă se aprind ledurile dar pe ecran nu mi deschide nimic.Am văzut în multe tutoriale că mufa galbenă trebuie sa fie 'video out',eu nu o am dar am av in,av out si ccd avin.
@@AdrianDragan am folosit exact aceeași schemă din video ul tau.Sursa de curent am luat o doar de pe becul marșarier fara sa mă leg de la navigațe.
@@sergiuvadan3312 Teoretic daca ai conectat canbus decoder-ul (acea cutiuta neagra din spatele navigatiei) ar trebui sa treaca automat pe modul camera mers inapoi cand bagi in marsarierre. Comenzile de la volan functioneaza? Ce navigatie este, de unde ai cumparat-o? Ai un link?
Comenzile pe volan îmi funcționează.Cred că nu am canbus.Asta e navigația (ii n rest ea funcționează foarte bine): € 206,54 | Lecteur DVD de voiture Android 9.0 DAB + 2din dans le tableau de bord pour Ford Transit Focus connecter S-MAX Kuga Mondeo avec QuadCore Wifi 4G GPS Bluetooth
a.aliexpress.com/_eL4T9h
Mie nu ami pornește camera când dau inapoi
Salut. Ce fel de unitate Android ai?
Nu ai videoclipul când ai montat senzorii de parcare?
Salut,
Senzorii sunt montați de vreo 6 ani. Totusi pentru montarea acestora este necesar sa demontezi bara din spate. Pe viitor va trebui sa schimb bara si poate fac atunci un tutorial.
@@AdrianDragan Cum de vrei sa schimbi bara spate? ce ai patit cu ea?
A suferit un accident usor cu o căruța si acum este rupt sistemul de prindere pe partea dreapta.
Sa vezi ce-o sa ma distrez eu, ca la mine nu se rabateaza bancheta!
Poti trece cablul si fara sa rabatezi bancheta.
How on 307 cc?
Hello. The installation would be about the same, except that you will have to look for a hole or pass that video signal cable of the camera inside the car.
SALUT CARE SUNT FIRELE DE PLUS SI MINUS LA UN ANDROID MENTIONEZ CA AS DORI SA MONTEZ CU CONTACT WIFI MULTUMESC
Salut. Depinde de masina, la fiecare masina alimentarile pot fi diferite. Eventual verifica chema de alimentare pentru modelul tau de radio.
puteai da suportul de la inceput ...
Nu mi-am dat seama...
Thanks for video, wich help me to do the same on 307.
I have a problem on last operation. I don't know what to do with red and black cable.
Here is a video on testing cable :
ruclips.net/video/YizbrKCifFo/видео.html
Red on red cable... But where must i put the black one ?
Hello. Put the black cable on the screw that holds the lamp to the body.