I would strongly recommend soldering and heat shrink on the wiring also run the wire through the original boot rubber sleeve, bit fiddly to do but looks much better also treat and use grommets on any freshly drilled metal to prevent any water ingress or rust. Not taking anything away from your install it’s just a few suggestions to improve installation and prevent any further issues 👍👍👍
Shoddy installation. The cable should follow the rubber cable grommet and not leave the cables exposed. Do not twist wires together, they need to be properly connected. Intuitive yes but a quick install sadly.
Excellent video 🙂 especially the routing of the wires, tho I have a canbus decoder 🙂 All I had to do was run a 20awg cable from one of the accessory 12v cables on the harness, the black neutral label was then taped away with high temperature harnes tape... no faffing with rear lights, the canbus decoder does all the work.
Hey, did you find out which color is the reverse light? If so and if you read this i would be happy about an answer ans maybe the color. I just cant find it anywhere welse in the internet. Also do you know if the Ground cabel has a special/ or any color?
is that screen also a satnav? Or is is possible to have both a satnav and the rear facing camera software all in one kinda thing? I really want this! NO way can I do what you done in the video, though. I'm a retard at that stuff lol (thanks for sharing though)
Hey, did you find out which color is the reverse light? If so and if you read this i would be happy about an answer ans maybe the color. I just cant find it anywhere welse in the internet. Also do you know if the Ground cabel has a special/ or any color?
Hi ,I had one of these fitted yesterday and have intermittent power steering problems in reverse .Any idea what may fix it please .Also could you send me the link for the facia as the one I ordered doesn't fit .Many thanks Jane
Hi, sorry i have no idea why you have this problem. The link as fallow: www.ebay.co.uk/itm/PEUGEOT-207-307-RADIO-STEREO-BLACK-DOUBLE-DIN-FASCIA-FACIA-SURROUND-FITTING-KIT-/122650170653?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
I would strongly recommend soldering and heat shrink on the wiring also run the wire through the original boot rubber sleeve, bit fiddly to do but looks much better also treat and use grommets on any freshly drilled metal to prevent any water ingress or rust. Not taking anything away from your install it’s
just a few suggestions to improve installation and prevent any further issues 👍👍👍
Your videos getting better day by day👍
Shoddy installation. The cable should follow the rubber cable grommet and not leave the cables exposed. Do not twist wires together, they need to be properly connected. Intuitive yes but a quick install sadly.
Excellent video 🙂 especially the routing of the wires, tho I have a canbus decoder 🙂
All I had to do was run a 20awg cable from one of the accessory 12v cables on the harness, the black neutral label was then taped away with high temperature harnes tape... no faffing with rear lights, the canbus decoder does all the work.
Amazing! Thanks
Wow thank you so muchh
What are the colours of the reverse light?
I'm curious if there is a reason why the camera isn't placed in the middle?
Interesting, whether lines drawn on camera react to steering wheel rotation? Or the model is too old, and it doesn't respond?
my brother did you just use the gear stick without pushing the clutch??
What colour wire is the reverse light wire 🤔
Hey, did you find out which color is the reverse light? If so and if you read this i would be happy about an answer ans maybe the color. I just cant find it anywhere welse in the internet. Also do you know if the Ground cabel has a special/ or any color?
Načo vám je zadná kamera do tak malého auta?A ešte k tomu čínska značka!Nechcel by som to ani zadarmo
Work this for peugeot 207 this type XOMAX XM-2DN6906
This is exacly how NOT TO DO IT
Wow great video brother 👏🏻
I needed this so bad!! Thanks so much for sharing 👍🏼
is that screen also a satnav? Or is is possible to have both a satnav and the rear facing camera software all in one kinda thing? I really want this! NO way can I do what you done in the video, though. I'm a retard at that stuff lol (thanks for sharing though)
👍🏼👍🏼👍🏼
I've bought me the exact same 2din radio with rearview camera for my 207 SW! This couldn't be more helpful. Thanks so much 💕
what is the code for active reverse wire i have 206 and all have same colour
Hey, did you find out which color is the reverse light? If so and if you read this i would be happy about an answer ans maybe the color. I just cant find it anywhere welse in the internet. Also do you know if the Ground cabel has a special/ or any color?
Hello mate do this radio frame is included with radio or need buy separately also do u I need any Fitting Cage /Mounting Kit ?
Hello great work where to bay this ? How i can find please help me
Hello mate, you can find everything on Ebay.
@@carmechanicdiy7233 what is the name of this display?
Always thought camera needs to be central to the ref bumper?
Surely the camera should be central no?
Hi ,I had one of these fitted yesterday and have intermittent power steering problems in reverse .Any idea what may fix it please .Also could you send me the link for the facia as the one I ordered doesn't fit .Many thanks Jane
Hi, sorry i have no idea why you have this problem. The link as fallow:
www.ebay.co.uk/itm/PEUGEOT-207-307-RADIO-STEREO-BLACK-DOUBLE-DIN-FASCIA-FACIA-SURROUND-FITTING-KIT-/122650170653?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0