Spray Foam In The New Shop!
HTML-код
- Опубликовано: 8 сен 2024
- I got Spray foam insulation in my new shop. I cover a few details about why you should put spray foam in a steel building.
Instagram Links:
Uvision Media = / uvision_media
Alvarez Metal Works = / alvarezmetalworks
6 to 3 Podcast = / 6to3_podcast
iLAAC = / ilaac_org
Facebook Links:
Uvision Media = / uvisionmediaorg
Alvarez Metal Works = / alvarezmetalworks
6 to 3 Podcast = / 6to3podcast
iLAAC = / ilaac
ATEM Mini = amzn.to/2ugEbVy
Podmic = amzn.to/376omiR
Rodecaster Pro = amzn.to/2Ruv7o3
Rode PSA 1 Microphone Boom Arma = amzn.to/2TxyGN4
Panasonic G7 Camera = amzn.to/2txqKAD
I think the only covering requirements are for residential (commercial may have something similar). But my understanding is that it is not just any covering, it has to be a fire retardant. Typically, people use intumescent paint or drywall. The reason is that foam burns easily so you need something to slow it down. They also make the in pretty light colors so the shop isn't so dark.
Good information. Thank you
5:48 that would be *compression* 😁
I'm no builder so excuse my ignorance of naming conventions. Up at the very top you have those bars going across, obviously for reinforcement. They look like metal beams or whatever.... Someone was building a van out and had spray foamed like you did and couldn't figure out why heat was still radiating inside. Some to find out....metal was transferring heat like metal rods via the screws and metal reinforcements if that makes any sense. Basically it made something akin to heating elements.
I would image that since heat rises it won't be an issue for you but I would put a laser thermometer on those things for fun.
The term for those bars is rafter ties. I guess in theory that could happen. Heat is not my issue here in NY. It the cold that coming next month. This made a massive difference that was instantly noticeable. The garage doors are my next big concern. Those rafter ties are nothing compared to cold that's going to come through those big metal doors.
@@AMetalWorks I bet. Nice looking setup overall
I looked into spray foam for my 24x36x10 and the cheapest I found was $8,500 and that wasn't lock in that was lowest could go up depending on the building when they got here
What kind of screws did you use to screw your 2x3 onto the metal thanks
You use a 2x3 and a 2x4 so to have the extra on one side
Does your attaching the 2x3s to the metal studs void your warranty?
I have no idea lol. There isn't much to warrant on these buildings.