Love the look you ended up with, looking forward to seeing what you produce in the new workshop. You don't list where you got the clutch and brake leavers from?
Hey man love your XJ650 build...I am currently working on my XJ650 and getting ready to weld the electronics tray and other frame work. Im was looking at your frame and was just wondering was there any specific "mounting tabs" you didn't cut off beside the engine frame mounts? I know it can be build specific..any pointers would be helpful. Thanks...Keep Up The Good Work!
I love those switches! Even looked at getting them for my own bike. Are you going to do a video showing you wiring them in? I'd really like to see how that works (especially for the indicator and headlight switches which are both 3-way switches). Looking forward to the next one!
Have you got a link for the levers please jish? Tried the link in your description and nothing comes up, building a CB750KZ cafe racer, would love a similar set up 👍
Hi Jish. Love the channel. Can you tell me what model your Domino throttle was and how did you get a cable to suit it? I am building an xj750 and having trouble finding a throttle to suit my Motogadget rubber grips and bar end indicators. Cheers, Jeremy
Love the build, just bought an XJ750 that I have been working on, although nothing nearly as intense as yours. What are your plans for the choke cable with the stock handlebar controls gone?
Anyome have suggestions for modernized clutchmaster controls? I have a honda 700s I'm rebuilding. I like the retro look but don't like the large levers and clutchmaster cylinder.
so if get it right, you put your trust in not in a genuine brembo brake, but in a cheap china one just for the looks of it ? but you paid 60 for a throttle chase? hope you will change your mind before preying for brakes in a emergency situation
I know what you are saying dude! But these levers are still far from cheap. I trust the reviews that had been left and even speaking to other users that have had no issues with them. Fake, yes but a very well made one that worked with my budget
@@jishh i support you and your build, i have cbx750 and I'm preparing for rebuild it, can you say your review for "brembo" brakes, and link for purchase, thx bro 💪🏻
Nice to see a new video. Like the look of those levers and grips. Not so much liking the look of tired on your face. I know you are extremely busy but take some time for yourself to recharge. You won't be able to carry on if you burn out.
Thank you for showing your concern buddy! Im alright 😁 i was up at 6:30 filming that part before work as i had to go and carry on building the container after work. It will all work out real soon!
The full assembly looking smart mate! Anyone wanting to see what the Reblemoto switches look like when they are lit up, get over to our Instagram page @asecustommotorcycles. Happy to help with supply of these and the full suite of motogadget goodies!
Jish my good Friend! I've got a couple petrol tanks lying around and I think I've got the PERFECT Tank for this bike. Please go to one of my videos and in the description is my email addy. Email me and I'll send off some photos and if you're interested, we'll get it on the next boat across the pond. Beyond that, LOVE the style you're taking on this build which is what made me think of this tank. It's got the Knee reliefs in the tank (factory) and a flat bottom. Would save you Tons of time in fab work! Looking forward to hearing from you my friend! Cheers mate! Zip~
Zip! I will have to check it out! I have already made the seat pan to suit this tank so will still use this one but i can always try different styles ;)
Looks great mate!! What’s your plan for the tank? If you ever get some spare time I would love if you could check my channel out and leave some feedback! Keep it up👌🏻
Love that lever set
Bought an m-unit for my build, can’t wait for that video. Still looking for the right controls and these look good !!
I have an '81 XJ750-Seca I'm rebuilding.... great videos. Looking forward to seeing more.
Progress is progress man. Nice little touches are what counts!
Agreed man ⚡️ at this point its all about the little touches 👌
finally my headlight has arrived at chile!!! i can't wait to make my own bracket! thanks Jish for that awesome idea of photogrammetry
Love the look you ended up with, looking forward to seeing what you produce in the new workshop. You don't list where you got the clutch and brake leavers from?
Glad to see it coming along!
Slowly but surely! M-Unit and all the parts you supplied will be going on soon ;)
Hey short/long your video is always worth watching it, I enjoy and cherish and even learned a lot.✌️
Thank you!
Looking good Jish, really coming together. Take it you'll be adding some glue to the grips later...
Glue? The only way these are coming off is if i cut them! The compressed air blows them on nice and tight 👍
The Vans grips really make it pop.
👍👍👍👍
Its in the details ⚡️
those switches drool
looks great mate love seeing this project come together. keep up the awesome work
Jish eres el mejor, tus vídeos son hipnóticos, saludos desde Perú.
I’ve been running Adelin levers for awhile and they work great. Guessing the Brembo fakes are from the same factory.
aha snap i have put my vans bmx grips on my scrambler cg! love the feel of them!
They feel great man!
Hey man love your XJ650 build...I am currently working on my XJ650 and getting ready to weld the electronics tray and other frame work. Im was looking at your frame and was just wondering was there any specific "mounting tabs" you didn't cut off beside the engine frame mounts? I know it can be build specific..any pointers would be helpful. Thanks...Keep Up The Good Work!
Hey mate I'm happy that u work so hard but take care of ur self man it looks like u haven't been sleeping nicely take care mate😊
Thank you man 🙏 it will be worth it!
love the Vans grips
Cheers bud!
I love those switches! Even looked at getting them for my own bike. Are you going to do a video showing you wiring them in? I'd really like to see how that works (especially for the indicator and headlight switches which are both 3-way switches). Looking forward to the next one!
It will most likely be included in with wiring in the M unit!
Ya love to see them getting wired in. I may pick these up as well. I love LEDs. More the better.
Will keep you posted 😁
Have you got a link for the levers please jish? Tried the link in your description and nothing comes up, building a CB750KZ cafe racer, would love a similar set up 👍
Hello, amazing video, thank you. I am looking for those exact levers, could you please post a link from the website you bought them ? Thank you !
do the buttons of the switches stay in place? I want those switches to control my DIY heated seat and they would have to stay pushed in.
Hi Jish. Love the channel. Can you tell me what model your Domino throttle was and how did you get a cable to suit it? I am building an xj750 and having trouble finding a throttle to suit my Motogadget rubber grips and bar end indicators. Cheers, Jeremy
Hi Jish, I love the switches but what are you doing about your choke control? Thanks.
Love the build, just bought an XJ750 that I have been working on, although nothing nearly as intense as yours. What are your plans for the choke cable with the stock handlebar controls gone?
Have you got a link to the clutch and brake levers
Anyome have suggestions for modernized clutchmaster controls? I have a honda 700s I'm rebuilding. I like the retro look but don't like the large levers and clutchmaster cylinder.
Can you tell me please what clip ons you are using ?
Super nice!
Cheers dude ⚡️
Please post link for levers. I can’t find those. Going on my cbx build
Do you have a link for the levers/master cylinder?
Do you have a diagram for how you wired it all? I am beyond confused
awesome bro love it ❤👍👍👍
Cheers bud 😁
we first need to establish if we're gonna call it a "lever" or a "lever". And the faster we agree to say "lever" we can get to work.....
Hi jish mate. Could you post a link for the levers, I really like those ones. Thanks
Same here
Me to
Ill see if i can find where i got them from ✌️
@@jishh much appreciated thanks
guys.... www.ebay.com/itm/TWM-Brake-Clutch-Replacment-Spare-Folding-Lever-Kit-UK-Stock-Brembo/323348641429?hash=item4b4914b695:g:GAUAAOSwUxhbSYEx
Lad , where is the wiring !???? hahaha looks sick, but the wiring we have to see
I wish I could have all the tools and money to get my motorbike working again
Why link everything but the Levers? Especially when everyone is asking.
so if get it right, you put your trust in not in a genuine brembo brake, but in a cheap china one just for the looks of it ? but you paid 60 for a throttle chase?
hope you will change your mind before preying for brakes in a emergency situation
I know what you are saying dude! But these levers are still far from cheap. I trust the reviews that had been left and even speaking to other users that have had no issues with them. Fake, yes but a very well made one that worked with my budget
@@jishh I couldn't find them online.
Do you have a link for them?
@@jishh i support you and your build, i have cbx750 and I'm preparing for rebuild it, can you say your review for "brembo" brakes, and link for purchase, thx bro 💪🏻
Watching this in 2022, I don't think you need to worry too much about that deadline 😑
Watch my latest video 😆
🤘😎
Nice to see a new video. Like the look of those levers and grips. Not so much liking the look of tired on your face. I know you are extremely busy but take some time for yourself to recharge. You won't be able to carry on if you burn out.
Thank you for showing your concern buddy! Im alright 😁 i was up at 6:30 filming that part before work as i had to go and carry on building the container after work. It will all work out real soon!
The full assembly looking smart mate! Anyone wanting to see what the Reblemoto switches look like when they are lit up, get over to our Instagram page @asecustommotorcycles. Happy to help with supply of these and the full suite of motogadget goodies!
Jish my good Friend! I've got a couple petrol tanks lying around and I think I've got the PERFECT Tank for this bike. Please go to one of my videos and in the description is my email addy. Email me and I'll send off some photos and if you're interested, we'll get it on the next boat across the pond. Beyond that, LOVE the style you're taking on this build which is what made me think of this tank. It's got the Knee reliefs in the tank (factory) and a flat bottom. Would save you Tons of time in fab work! Looking forward to hearing from you my friend! Cheers mate! Zip~
Zip! I will have to check it out! I have already made the seat pan to suit this tank so will still use this one but i can always try different styles ;)
Xd bro
Looks great mate!! What’s your plan for the tank? If you ever get some spare time I would love if you could check my channel out and leave some feedback! Keep it up👌🏻