I really appreciate you sharing your knowledge with the rest of us. I enjoy the honesty too. I smiled when you said you figured to be done in an hour and a half. Then smiled again when you said the parts store gave you the wrong U joints. Thank you
Thank You! Appreciate your attention to every detail, detailed explanations, and at a great speed that allows someone to learn and not miss anything. Great job and thanks again!
Welcome to our channel! In today's video, Ryan will show you how to remove and install heavy truck driveshaft U-Joints. DIY saves you $500. If you enjoy our semi truck maintenance and repair videos, make sure to check out our playlist - ruclips.net/video/WhyzMZefFlw/видео.html&ab_channel=Road-Field-HomewithRyan%26Sophia WE TRY TO PUT OUT NEW VIDEOS EVERY WEEK, SUBSCRIBE TO OUR CHANNEL AND TURN ON THE "NOTIFICATION" BELL TO GET INFORMED FOR OUR NEW VIDEOS. ENJOY!!
Great video. Doing u-joint job on my GMC 3500 dually; you made it look easy. Go Navy See Bees. In 1970's, USCGC Acushnet was stationed Gulfport, Miss with the See Bees.
Ryan I can feel your pain putting the drive line back into place I am dealing with that now.i and ankle deep in mud in northern alberta temp about 2c trying to get out of this isolated area have a broken bolt on the yoke can only use 1 bolt on 1810 ujoint hoping to make out to a shop to extract the broken bolt
I always hit the end cap. I would never hit the yoke. You are replacing the end cap but not the yoke. Hopefully. The metal is real thin on the yoke. I don't hit anything anywhere on the actual driveline, except the endcaps. IJS.
Hello RYAN, It was really great watching your video and it was very useful for me. I am a truck driver and I recently broke the truck drive shaft accidently and my company is ready to charge me for that. Can I please know that how much cost does it take to replace or repair a drive shaft of a Volvo truck? thanks :)
I understand, most of my videos are for people have some basic mechanic Knowledge and experience to follow through. It could be a struggle for people without experience. 😉
Friend your videos are super good congratulations! Can you help me with one torque? UJoint,oil pan,rear and front motor mount, flywheel, bellhousing flywheel, for a 2014 peterbilt 386 with cummins isx15 engine
I like to keep the drive shaft on the flange and use a jack to take off the caps that works as well and you don’t have to beat the crap out of the driveline but good job either way
Hi I just got a Mack and it has the same drive shaft. My other Mack has a two joint drive shaft going into the transmission. What’s the difference between them?
I really enjoy these service videos you are doing. I am about to get a tractor, and having worked on lots of cars, pickups and ag equipment, seeing some work on your tractor has been of value to me. I am also considering leasing onto Landstar, so I am curious as to what their inspection schedule is. Is this a recurring 120 day, or is this just because you just returned with a new tractor?
The 120 day inspection is reoccurring once you come on board. I just posted a video on the topic if you want more info on the subject! Thanks for watching!
yeah that whey you can broker there freight cheaper than ryan is hauling it for and pay all the overhead by having you're own authority, sounds really smart to me!!!!!!
I really appreciate you sharing your knowledge with the rest of us. I enjoy the honesty too. I smiled when you said you figured to be done in an hour and a half. Then smiled again when you said the parts store gave you the wrong U joints. Thank you
Love the videos man. I don't drive trucks right now no more. I work on them.
Great video! My new Milwaukee electric grease gun keeps me from putting off greasing my equipment. Love it.
Thank You! Appreciate your attention to every detail, detailed explanations, and at a great speed that allows someone to learn and not miss anything. Great job and thanks again!
😉👌👍
Welcome to our channel! In today's video, Ryan will show you how to remove and install heavy truck driveshaft U-Joints. DIY saves you $500. If you enjoy our semi truck maintenance and repair videos, make sure to check out our playlist - ruclips.net/video/WhyzMZefFlw/видео.html&ab_channel=Road-Field-HomewithRyan%26Sophia
WE TRY TO PUT OUT NEW VIDEOS EVERY WEEK, SUBSCRIBE TO OUR CHANNEL AND TURN ON THE "NOTIFICATION" BELL TO GET INFORMED FOR OUR NEW VIDEOS. ENJOY!!
One of the best way to remove the cross
I think even I can do that job thanks to your tutoring, great video, your channel and TAT Express are my favorite learning channels
So how often do you recommend to grease the truck completely to prevent this from happening?
What is the trick to keep the caps from falling off when putting the shaft back in?
Great video. Doing u-joint job on my GMC 3500 dually; you made it look easy. Go Navy See Bees. In 1970's, USCGC Acushnet was stationed Gulfport, Miss with the See Bees.
Ryan I can feel your pain putting the drive line back into place I am dealing with that now.i and ankle deep in mud in northern alberta temp about 2c trying to get out of this isolated area have a broken bolt on the yoke can only use 1 bolt on 1810 ujoint hoping to make out to a shop to extract the broken bolt
As soon you replace the ujoins you should inspect the shaft should replace or repainted, great video
Interesting thing..soon as I seen you talking Im like....hes former military. Then I see the seabees flag in the garage. Nice work great vid!
Great job. Saved some money
For a second I thought your father in law was gonna hit you with that bar😂
Ad usual great information
Thank you!
I always hit the end cap. I would never hit the yoke. You are replacing the end cap but not the yoke. Hopefully. The metal is real thin on the yoke. I don't hit anything anywhere on the actual driveline, except the endcaps. IJS.
I just bought 2 SPL250 u joints here in Casper, Wyoming, for $230/piece. Dana/ Spicer
Thank you
Thanks great video!
Thanks Ryan.
How much torque on the clamp bolts?
Thank you for your videos. You are so helpful
Replacing the u joints is also a good time to sandblast and repaint the driveshaft
Thanks you so much
You are welcome!
Did it shift smoother after or was it still jumpy
Hello RYAN,
It was really great watching your video and it was very useful for me.
I am a truck driver and I recently broke the truck drive shaft accidently and my company is ready to charge me for that. Can I please know that how much cost does it take to replace or repair a drive shaft of a Volvo truck? thanks :)
Greese goes a long way
My truck has 545000 when should I get my u joints changed
U joints vary from sizes , 16-10 , 17-10 , 18-10. They also vary by style from half round & full round.
This is something I’d get half way thru and say to myself, I wish I had just paid the $800 bucks! 😂 great job tho.
I understand, most of my videos are for people have some basic mechanic Knowledge and experience to follow through. It could be a struggle for people without experience. 😉
But anything comes with struggle in the first try. The more you try and the more comfortable you will feel. Good luck!
Another great video
You should watch EZRider!
Thank you for the recommendation
What gear should the truck be in while removing the drive shaft ??? Someone help
Any gear will work while removing it. To rotate it jack a tire up and put it in netrual.
That a 1/2 inch torque wrench?
Enjoy your videos! I think you would be good at open deck, step deck rgn
Friend your videos are super good congratulations! Can you help me with one torque? UJoint,oil pan,rear and front motor mount, flywheel, bellhousing flywheel, for a 2014 peterbilt 386 with cummins isx15 engine
Can I please bring my truck over to you ?
I have a bad play between my Rear Yoke and a U joint.
Please share the address of the shop
We only take new customers with aftertreatment emission issues. Sorry.
I like to keep the drive shaft on the flange and use a jack to take off the caps that works as well and you don’t have to beat the crap out of the driveline but good job either way
You keep the mount brackets on?
How much do these parts cost?
Hi I just got a Mack and it has the same drive shaft. My other Mack has a two joint drive shaft going into the transmission. What’s the difference between them?
Do you have a picture or something that I can look and let you know?
Another great video Ryan. So how do you tell the torque settings on the various bolts? Experience, manual or something else?
Normally the instructions show you the torque setting, and experience plays a smaller role in it.
I really enjoy these service videos you are doing. I am about to get a tractor, and having worked on lots of cars, pickups and ag equipment, seeing some work on your tractor has been of value to me. I am also considering leasing onto Landstar, so I am curious as to what their inspection schedule is. Is this a recurring 120 day, or is this just because you just returned with a new tractor?
The 120 day inspection is reoccurring once you come on board. I just posted a video on the topic if you want more info on the subject! Thanks for watching!
This guy is a real slipper lady from TikTok in real life
What does that even mean?
Sorry I meant - SEA BEES - GOOD OLE "CONSTRUCTION BATTALION"!
You need some safety glasses on.
👍😉
wtf would a youtube creator decide you upload a video that the viewers cant see the subject of the video?
lucky you, u just removed them by hammer and socket ,,, not working for me
They want charge me 500 for a rear joke seal that is insane
This guy is exploiting his father in law
You're gonna get your lease canceled and that shop won't be able to do 120s. You know landstars policy for failing 120s
Lol lol the first mistake was leasing to landstar.....they are so cheap...get your own authority...you be better off
I am happy where I am at now, because of the low fix cost. The low fix cost gives me the flexibility to work 10 days a month.
@@truckingandfixing good 👍 don't let any moron put you down in your decisions
Then no drop and hook or haz
yeah that whey you can broker there freight cheaper than ryan is hauling it for and pay all the overhead by having you're own authority, sounds really smart to me!!!!!!
what 500$ u talking about?? and no most of the time u cant remove it like that. i tried
40-50$ to press out and press in in shop
Hoorah Seabees. CM I’m assuming?