I haven't seen a video on how to remove the lens that has a prescription from the sculpgun s30 pro, and how do I replace it? Do I have to buy another module for that?
The laser s30 pro max 22w have 2 cristal, 1 you replace but 1 similar the others and you dont replace, where i can found this lens and how can replace? Thanks
I bought a machine S30 10W In which modes to cut transparent acrylic covered with paper? Is there a mode table for different materials and different thicknesses?
Llevo mas de seis meses con este producto Sculpfun S30 Pro10W y es genial pero de la nada, enciende cuando quiere, como si tuviera un corto. la luz de encendió prende pero el motor no. después de varios intentos funcionó sin problema nuevamente y después ya nada. no he podido resolver este problema, alguien sabe a que se debe??
@@SCULPFUNReal no e visto un video de como sacar la lente que tiene graduación de la sculpgun s30 pro, ¿y como lo remplazo? hay que comprar otro modulo para eso?
The orginal glass became matt after 200 hours of work. Replacing is NOT easy because it is screwed in so strong that your EDS-10 key bends like paper...
un asco de diseño y te mandan herramienta que no sirve, gran equipo hasta que tiene que cambiar el lente y su diseño no te lo permite, una inversion perdida, deberian replantear su diseño de lentes o mandar una herramienta que facilite hacer esto. un pequeño detalle que me hizo replantear y cambiar de marca.
@@SCULPFUNReal the tiny one that you use the allen on yes i unscrewed that, mine is s30 pro, but i think the brass part is different, i dont see the notches to put the wrench and im afraid to damage the threaded part, should i apply wd40 to see if ti comes apart?
I haven't seen a video on how to remove the lens that has a prescription from the sculpgun s30 pro, and how do I replace it? Do I have to buy another module for that?
S30 pro max looks so cooool😮😮
Yes it is!!!😆
Bonjour,
Merci pour la vidéo très explicative. Une petite question : quel produit utilisez-vous pour nettoyer la lentille?
I have used sculpfun s30 ultra 33w,, for the replacement lens? Is there substitute/alternative for the lens same as with s30 pro max?
The laser s30 pro max 22w have 2 cristal, 1 you replace but 1 similar the others and you dont replace, where i can found this lens and how can replace? Thanks
Hola, pudiste encontrarlo?
Hello, any answer ?
great video shows me how to replace the laser lens
Cool to know how yo properly clean the lens of my machine
Hello, Does the lens have a correct side to install? Is it flat?
Hello, where can i buy another lense for my S30 pro max please?
The purchase links are under the video.
Informative video 🥰
Thank you!!!!
I bought a machine S30 10W In which modes to cut transparent acrylic covered with paper? Is there a mode table for different materials and different thicknesses?
Diode machines cannot cut clear acrylic
where can I buy? the complete lens piece plus the laser module piece
Pudiste conseguirlo
Keep it up 🤠 😊
Rotatory system is compatible with s30 pro max?
Yes sure.
What is the glass size for each?
La guarnizione di gomma deve stare sotto o sopra alla lente di messa a fuoco?
when the lens for S30 pro is replaced, is it correct to place the lens above the sealling ?
Yes, The lens is pressed on the sealing ring, and the sealing ring is installed in the sleeve
@@SCULPFUNReal i mean first is the lens and then the ring or first the ring and then the lens?
What would i need to get to upgrade my S30 5W to an S30 20W?
Sorry it can't be upgrated to 20w.
can s30 lens be used instead of s9
No. The S9 has its own lens.
I need help i need a spare part s30 ultra please 😢
Informative video!!!
😏
Llevo mas de seis meses con este producto Sculpfun S30 Pro10W y es genial pero de la nada, enciende cuando quiere, como si tuviera un corto. la luz de encendió prende pero el motor no. después de varios intentos funcionó sin problema nuevamente y después ya nada. no he podido resolver este problema, alguien sabe a que se debe??
mine is s30 pro. brazz thred stucked to the mozzle. how to fix it?
Pudiste solucionarlo ?
Is it possible to upgrade my s9 into s30 pro max 20w?
Sorry no.
@@SCULPFUNReal How about to s30 10w?
@@mrnepomuceno Yes sure!
S30 pro max es compatible con el s6 pro…
No
@@SCULPFUNReal no e visto un video de como sacar la lente que tiene graduación de la sculpgun s30 pro, ¿y como lo remplazo? hay que comprar otro modulo para eso?
Salve, ho svitato la vite dell'ugello e togliendo l'uggello dell'aria si svita anche il pezzo dove è messa la lente 🤦
Come posso risolvere ? Grazie.
If you have any after-sales questions, please send emails to: support@sculpfun.com
The orginal glass became matt after 200 hours of work. Replacing is NOT easy because it is screwed in so strong that your EDS-10 key bends like paper...
Shitty as hell, I've just harm myselft trying to replace, this is awful.
un asco de diseño y te mandan herramienta que no sirve, gran equipo hasta que tiene que cambiar el lente y su diseño no te lo permite, una inversion perdida, deberian replantear su diseño de lentes o mandar una herramienta que facilite hacer esto. un pequeño detalle que me hizo replantear y cambiar de marca.
hi i tried to do this but the muzzle comes with the brass part, together and i cant separate them what should i do
There is a very small screw in the brass, please unscrew it before removing the brass
@@SCULPFUNReal the tiny one that you use the allen on yes i unscrewed that, mine is s30 pro, but i think the brass part is different, i dont see the notches to put the wrench and im afraid to damage the threaded part, should i apply wd40 to see if ti comes apart?
@@luinks Please use: the smallest built-in hex wrench in the lens tool box provided