Bro, glad you went with the DDX's! I had them in a 5 cubed box at 29.5hz on a skv2 2500, and they're a sleeper sub for sure. Got windy! Keep bringing the pressure
5 cube is what I run I’m tuned to 27hz can play down to 21hz clean usually the more cube the lower your box had to have been in the 4 cube range boss 🤙
sounds good nice box! I also got a gp audio box tuned 32 hz, a flat pack for my 2 x 15v3s double baffle. birch .sanded stained and did all screws from the inside. flared the port inside and out clear coated 3 times.. alot of work but its worth it.. smart 5 pushin
There's a lot more out there than you think not just them don't limit yourself,, you get better deals going directly to the manufacturer sometimes,, and they honor their warranties better that way
@@davidgibbs1083 They design them based on whatever sub you have. Whether it's Birchwood 13 ply, double baffle, tuned to whatever you need and even have some glue it and screw it boxes, which is what I have so it's a nice insight to see how a box even goes together in first place and price isn't that hard on the wallets. Great customer service and it's like a 2 to 3 week wait until you receive it so it's not that long of a wait in my opinion.
I have a video from a guy that got the same setup as well and he couldn’t be happier. I’m glad it worked out 🤣. Just goes to show there’s no trickery in the videos.
Just bought me 2 ddx 2ohm 12 and a sia 2500 amp. Gonna check this website to get box. I always been a kicker man but have been contemplating skar for a while. After watching ya videos, I decided to invest. Good looking mane
Good color scheme that white port will match that skar audio logo on woofers those DDX 12s are great budget woofers super underrated I have 5 DDX -15s on a Korean 8k wired low and they get intense in my wall build 👌
@@BassAddict91 I need to take videos just got my USB loaded up with demo songs I can float shirts easily with 4 clicks left over on my pioneer headunit to clean max volume
Just dropped a small video on my channel I'm super impressed with these DDX 15s on low power I still haven't even went full tilt yet and these subs are the truth 😅
Just a little bit of caution my guy. I'd recommend matching the gain setting to the output voltage of the head unit or the DSP if you're using one. It may sound ok now but in the long run it's the best way to maintain the subs. Not hating, just looking out for a brother with a little expert advice.
Them DDXs can almost be run hard from the jump without being broken in they built like tanks! But it's better to be safe than sorry...also it doesn't take as much power to get those as loud...the sensitivity score is like a 88-89 on them
You can play any sub hard right from the jump. Being broke in means exactly just that, that it's broke in. Only way to break it in is to give it power. After a sub is broke in, its parameters change a bit and the fs will be lower than before broke in.
Sounds good I never heard the ddx in person but that box is beautiful. I think the biggest i could go length wise was 31 so it’s a single 12” for me. Your subs hit hard. How would you compare to the sdrs you had? I recommend putting the battery on the side you got alot of space to play with and maybe you can push the box back some. I put my xp2000 on the side it doesn’t move at all.
@@BassAddict91 been watching your channel just went from the sdr loaded package to two ddx and a 2000 rp waiting on delivery can’t wait! I’m on stock electrical though any recommendations on power upgrades without breaking the bank
More bat and power runs and ALWAYS use ofc copper not cca copper oxygen free can carry the same power as a six time bigger diameter of copper clad aluminium "cca".. so always OFC copper 5n and above preferably and I assure you your system will come alive... power ground and speaker runs all ofc and get lithium is top mods... amp the subs. Stay loud bro. Ps there us a reason audiophiles home audio nuts spend 40 k for a meter long power cable ect. Ifc makes all the difference.🔉💪🔉
Aaaaaaaaaah you got it! I had to stop this video at 2:26 to drule over that new box you got and that bitch looks gooooooood mane! Now I got to get back to the video and peep game. Matter of fact cant wait to build mine for my EVL subs.
Thanks for posting and great video, by chance did you need to drill for the speaker wires? or did it have a terminal cup install? Went to the site and couldn't get any clear pics if it had one. Nice job again.
Bro I swear to god that shit hitting hard. 💪🏾 and I for sure mess with gp audio that’s where I got my box from for my 2 15s they got real good quality subwoofer box and the mdf wood is good wood bro for a subwoofer box but heavy as hell
Run u a xspower d4700 under the hood with the big 3 and u will stay steady at 14.4.or 14.3 wont drop below 14 I have that in my 17 Nissan sentra cause my box is custom made and no 1 believe its E series 10s
Great choice on the subs and enclosure! I also got 2 Skar DDX, however I got 2 10" 2-OhmDVC, powered by 2 Sundown Audio SFB-2000D (one to each sub) wired at 1 ohm. I also got 2 Skar 3.5" super tweeters and 2 4x5 Door speakers powered by a Taramps 440 with a Dayton Audio 408 DSP. These DDX's LOVE big enclosures!! Mine's custom made, but is 3.75ft3 tuned to 34Hz. Ive never heard 2 10's beat so hard in my life! These subs are bangin for $135/Ea!! Skar is def the BEST budget sub out there hands down.
I have a 12 inch Kicker CompR and the sub blew out today and I was wondering if this sub would fit in that Kicker box. The website says the box has a TD 11 1/4" BD 14 7/16" W 18 3/8" H 16"
Question. None of the pictures on their site, and none of the videos I've found show the back of the box. Did yours come with terminal cups, or did you have to drill the hole for the terminals?
Sounds like its slammin' bruh! I have the same box as ur old box, only difference is I have two VXF 12s (also Skars) on an Orion HCCAsplx 3000.1D. I would like to get the GP box though. I cant say nothing bad about the old skar box tho. Its ripped the sheet metal from body on trunk latch. All 4/0 ofc XL sky high wire, three runs, DC Power HO alternator
Love the set up! How you like the box tuned at 35htz? Do it hit pretty low or more of a punchy feel? Is 2k rms hit nixe as well I wanted to go with something 1500 rms each and run a smart 3k but might be more costly due to needing to upgrade electrical what you think?
Whew when the babies break on in they gonna sho nuf cut up her voltage holding up real good too bro And you really don’t have to do dual runs to the amp fr fr fam… that’s what’s up cuh luh ya cuh lol
Ik the struggle of getting that box in and out lol. Could you help me out with the wiring ? I got 2 DDX12s 4ohm, needing it wired to 1ohm to a rp2000.1. I've done 3 wirings now, and the lowest I've got is 4ohm with them parallel parallel
Nice box man i got a couple DD 9510k's im hoping to put in a Gatley box im probly gonna end up gettin into 18's so ima need a box for those ill check GP out good lookin 🤝✌️
Honestly for now I just drilled a hole big enough to get the wires through from the subs to the amp coning out the box. But Amazon has terminal cups for the low. I just haven’t really had time to pull everything out and install one
Good shit man! When I install subs I use t nuts. Like 8/32s. That way you have some metal threads and can remove the subs as many times as you want... Check them out... That box looks legit. I was wondering about gp. Almost ordered one.
Sounds hella good with this box bro !!!! What box you Prefer outta the skar an that gp? I have the Skar armor box they got an shii I was considering on gettin this box !!? How much better does it bump?
Man when they break in and you can feed them jokers some more power, boy you ain't going to be able to tell your wife ish!🤣 You might have to put them on the Skar 3500 after you upgrade her electrical! But they sounding good bruh and great install keep doing your thing bruh much respect from N.C.
bigjeffaudio.com/products/pair-of-jims-machineworx-4-hole-4-0-bolt-down-screw-type-battery-terminal?variant=39271440318623 Use my discount code: BassAddict
Hey, thank you for your order and review, we greatly appreciate your support.
No problem is there any way I can contact you guys to talk.
@@BassAddict91 send us an email, gpaudio@outlook.com
How big is 32"x16" x16" box?
@@CHarris73 32x16x16 I’d imagine
@@CHarris73 I got one in yesterday and it’s big af no homo
Finally, a man who knows what the DDX's needs and he drinks a great beer too. Great video homie thank you ...
💪🏾💪🏾🤣🤣🤣
Hearing you say ooh when they hit that one low note made me smile 😆 I feel the same way about BASS 😆🔊🔊 Basshead for life 👍🔊🔊
Damn, your the only one on RUclips with a review of there boxes, definitely gonna get one after this review, thanks man.
Bro, glad you went with the DDX's! I had them in a 5 cubed box at 29.5hz on a skv2 2500, and they're a sleeper sub for sure. Got windy! Keep bringing the pressure
Yeah, they're probably one of the biggest sleeper subs out there!
5 cube is what I run I’m tuned to 27hz can play down to 21hz clean usually the more cube the lower your box had to have been in the 4 cube range boss 🤙
@@Caddy_lac_willport controls that volume affects it as in the port length will vary based off the volume but its the port that changes the tuning
sounds good nice box! I also got a gp audio box tuned 32 hz, a flat pack for my 2 x 15v3s double baffle. birch .sanded stained and did all screws from the inside. flared the port inside and out clear coated 3 times.. alot of work but its worth it.. smart 5 pushin
U prob paid 400 bucks screw that
gotta love gp. ive used them 3 times so far. good stuff
Thank you for your orders.
That box is clean asf 👀👀😍😍😍 beating too 🔥🔥🔥 and the subs barely moving 👀
We on to something bro 😳
Tyler jolly seems like a good guy. I've been following them for a while. I definitely need to shop GP car audio.
There's a lot more out there than you think not just them don't limit yourself,, you get better deals going directly to the manufacturer sometimes,, and they honor their warranties better that way
I had 2 DDX 12s in a 4th order bandpass, ported through the rear deck. Loudest setup I've ever had. I miss it.
I had a ddx 15 once and that thing hits nice. Especially with a clean signal going to it!
Yes sir, got both of my enclosures.from gpcaraudio and I can't complain about either one. Definitely worth the money for some custom enclosures.
Way better than mbe boxes
@@fusiondensity3287 what makes them better ? I need a custom box . Trying to figure out who to go to
@@davidgibbs1083 They design them based on whatever sub you have. Whether it's Birchwood 13 ply, double baffle, tuned to whatever you need and even have some glue it and screw it boxes, which is what I have so it's a nice insight to see how a box even goes together in first place and price isn't that hard on the wallets. Great customer service and it's like a 2 to 3 week wait until you receive it so it's not that long of a wait in my opinion.
I never had or heard 1 one of his boxes so I can't speak on that bro
@@davidgibbs1083 I've heard a few of them and the build quality is really good too. Better price also.
excellent content as usual and never a dull moment. Keep it real as you always do kinfolks! 1 love mane.
💪🏾💪🏾💪🏾 thanks bro
You made me order the same setup. 2 12 ddx rp2k and truspec box. Just got it in and banging today. Definitely an upgrade over the sdr 12 package.
I have a video from a guy that got the same setup as well and he couldn’t be happier. I’m glad it worked out 🤣. Just goes to show there’s no trickery in the videos.
The right box makes ALL the difference!
True
Just bought me 2 ddx 2ohm 12 and a sia 2500 amp. Gonna check this website to get box. I always been a kicker man but have been contemplating skar for a while. After watching ya videos, I decided to invest. Good looking mane
You my friend just got another subscriber. Love your vids. Great job!!!
Good color scheme that white port will match that skar audio logo on woofers those DDX 12s are great budget woofers super underrated I have 5 DDX -15s on a Korean 8k wired low and they get intense in my wall build 👌
Hell yeah do you have any videos I'd like to check them out. All My social media info is in the description
@@BassAddict91 I need to take videos just got my USB loaded up with demo songs I can float shirts easily with 4 clicks left over on my pioneer headunit to clean max volume
Just dropped a small video on my channel I'm super impressed with these DDX 15s on low power I still haven't even went full tilt yet and these subs are the truth 😅
Got copyrighted took it down IL try again later on
Just a little bit of caution my guy. I'd recommend matching the gain setting to the output voltage of the head unit or the DSP if you're using one. It may sound ok now but in the long run it's the best way to maintain the subs. Not hating, just looking out for a brother with a little expert advice.
Thanks for the advice bro 💪🏾💪🏾
Running one DDX 12 off 1k amp rn, what a sub for the price! So glad you went w dual DDX’s!!
Yeah me too bro
Them DDXs can almost be run hard from the jump without being broken in they built like tanks! But it's better to be safe than sorry...also it doesn't take as much power to get those as loud...the sensitivity score is like a 88-89 on them
You can play any sub hard right from the jump. Being broke in means exactly just that, that it's broke in. Only way to break it in is to give it power. After a sub is broke in, its parameters change a bit and the fs will be lower than before broke in.
Facts 👆🏽👆🏽
My personal theory is,,, just listen to them,,, don't beat them to death because after broken is wore out🤔
@@FrankStPeter oh they get beat to right about death but they never fail. DDX is solid.
Sounds good I never heard the ddx in person but that box is beautiful. I think the biggest i could go length wise was 31 so it’s a single 12” for me. Your subs hit hard. How would you compare to the sdrs you had? I recommend putting the battery on the side you got alot of space to play with and maybe you can push the box back some. I put my xp2000 on the side it doesn’t move at all.
They hit harder than the sdr it's a night and day difference bro
@@BassAddict91 been watching your channel just went from the sdr loaded package to two ddx and a 2000 rp waiting on delivery can’t wait! I’m on stock electrical though any recommendations on power upgrades without breaking the bank
More bat and power runs and ALWAYS use ofc copper not cca copper oxygen free can carry the same power as a six time bigger diameter of copper clad aluminium "cca".. so always OFC copper 5n and above preferably and I assure you your system will come alive... power ground and speaker runs all ofc and get lithium is top mods... amp the subs. Stay loud bro. Ps there us a reason audiophiles home audio nuts spend 40 k for a meter long power cable ect. Ifc makes all the difference.🔉💪🔉
Shhh dont tell no one about the DDX before I upgrade to the 12". These subs are the bees knees baby
Damn nice bro you know after you change out the box you can adjust the amp
Nice box my bro....keep buildin, bangin an doin ya thang..
Those gp boxes are a beast. Next to the custom boxes.
Facts it's almost the best prefab you can get and the glue it and screw it boxes are beast as well
@@BassAddict91 yes sirrr
She slumpin hard wish i woulda found that box instead of the down for sound profab
Now they go hard......sound perfect, make me want to get some skar subs now
Bout dat Skar wish them fools come out wit some grill covers but them 12s i got flex so hard them grills have to be thiccc🤝🏽
Aaaaaaaaaah you got it! I had to stop this video at 2:26 to drule over that new box you got and that bitch looks gooooooood mane! Now I got to get back to the video and peep game. Matter of fact cant wait to build mine for my EVL subs.
BA 91 you good to go my bro just play them and let them finish breaking in with that box bro♥️👌😊💯
Thanks for posting and great video, by chance did you need to drill for the speaker wires? or did it have a terminal cup install? Went to the site and couldn't get any clear pics if it had one. Nice job again.
GP audio is the best. I love their 1/0 wire. I have 2 evl 12s and am looking at their glue it and screw it flat packs.
I would have gotten one but I don't have the tools to build it properly. I didn't wanna jack the box up and blow the money 🤣🤣
I have 4 evl 12s in a Birchwood box I built on 2 3500s rp 1 Ds had 2 boxes just like that I built it slams lol
@@BassAddict91 100
great video them scars sure sounds good
Gp very good people 💯 I use to run the boxes when I was into high bass
💪🏾💪🏾
Bro I swear to god that shit hitting hard. 💪🏾 and I for sure mess with gp audio that’s where I got my box from for my 2 15s they got real good quality subwoofer box and the mdf wood is good wood bro for a subwoofer box but heavy as hell
Definitely heavy 🤣🤣
@@BassAddict91 🤣😆 love the content bro keep up the work and maybe one day I’ll show u my box-(subs)
For sure bro thanks for the support 🙏🏽 💯
@@BassAddict91 Always bro
@@BassAddict91 always bro for sho
Love your videos man music and bass to me goes together! That box is beautiful 😍
Thanks bro 💪🏾
My opinion...you should paint the box with some kinda water resistant paint bc any kinda water hit it .. it'll swell up on ya bruh
That shit hits hard now
That box look clean
Ok
Good vid just ordered the glue and screw custom box from them
All i can say is 🔥🔥🔥
Run u a xspower d4700 under the hood with the big 3 and u will stay steady at 14.4.or 14.3 wont drop below 14 I have that in my 17 Nissan sentra cause my box is custom made and no 1 believe its E series 10s
I like that enclosure, I have the same subs but 10's ,they slam harder then my kicker 12's
💪🏾💪🏾
Them boys wangin tough.
Sounds good bro I have 2-12 skar sdr what is the highest amp should I get ?
I would say the rp1500
👆🏽👆🏽👆🏽
Good shit bro. I like the ddx they definitely worth the money. Them boys can take 3k all day and that box is 🔥 It all looks good 💪🏾
Thanks bro I may or may not have a bigger amp on the way 🤫🤫
They slappin that mirror about to leave the chat
Hell yeah it won't be long
Great choice on the subs and enclosure! I also got 2 Skar DDX, however I got 2 10" 2-OhmDVC, powered by 2 Sundown Audio SFB-2000D (one to each sub) wired at 1 ohm. I also got 2 Skar 3.5" super tweeters and 2 4x5 Door speakers powered by a Taramps 440 with a Dayton Audio 408 DSP. These DDX's LOVE big enclosures!! Mine's custom made, but is 3.75ft3 tuned to 34Hz. Ive never heard 2 10's beat so hard in my life! These subs are bangin for $135/Ea!! Skar is def the BEST budget sub out there hands down.
Facts
looking to get get them ddx 10s , would be nice to see how they hit on an video of yours
Say mane. Just ordered that box for my ddx's. Got 2500 sundown amp. Hooking it up next week. Leggi
💪🏾💪🏾
Did u use regular paint on ya box? I don't see a video with it painted. Getting system hooked up Monday and I wanna paint the box
I have a 12 inch Kicker CompR and the sub blew out today and I was wondering if this sub would fit in that Kicker box. The website says the box has a TD 11 1/4" BD 14 7/16" W 18 3/8" H 16"
Great video. I hope gp audio gives you a cut, because I just bought the same box using the link. Headed to lil cuz channel now
I hope so too 🤣🤣 and thanks bro for the support on both channels
Question. None of the pictures on their site, and none of the videos I've found show the back of the box. Did yours come with terminal cups, or did you have to drill the hole for the terminals?
Bro the building is a great job 👍👍💯
Thanks bro
Sounds like its slammin' bruh! I have the same box as ur old box, only difference is I have two VXF 12s (also Skars) on an Orion HCCAsplx 3000.1D. I would like to get the GP box though. I cant say nothing bad about the old skar box tho. Its ripped the sheet metal from body on trunk latch. All 4/0 ofc XL sky high wire, three runs, DC Power HO alternator
Love the set up! How you like the box tuned at 35htz? Do it hit pretty low or more of a punchy feel? Is 2k rms hit nixe as well I wanted to go with something 1500 rms each and run a smart 3k but might be more costly due to needing to upgrade electrical what you think?
Yeah I'm getting a smart bass 3k for my 2 15s DDXs
Get all 0 gauge and big 3 kit plus battery in the back
Go talk to a wood shop in your area. They could recommend a dope unique veneer. That would make it look awesome
Whew when the babies break on in they gonna sho nuf cut up her voltage holding up real good too bro And you really don’t have to do dual runs to the amp fr fr fam… that’s what’s up cuh luh ya cuh lol
Facts they only gonna get louder. 💯 🤣🤣 cuh luh ya cuh what you know bout that bro ☠️☠️😭🤣🤣
@@BassAddict91 king south from my hood fam lol that’s the lingo 🤷🏾♂️
On ma I instantly knew where you get that from 🤣 💯
@@BassAddict91 told ya I'm from the jump lol
💪🏾💪🏾
hell yea got the same box. i got 2AP bdc4 12’s
DDX is a great sub, for the money or other wise.
Nicely done bro 🔥
Ik the struggle of getting that box in and out lol. Could you help me out with the wiring ? I got 2 DDX12s 4ohm, needing it wired to 1ohm to a rp2000.1. I've done 3 wirings now, and the lowest I've got is 4ohm with them parallel parallel
Match the amp gain with your head unit. They hittin though.
Yes siiiir!!! Keep the videos coming bro
tks for the link they need, to get u a code bro never saw this sight while looking .
Ima get in contact with them if I can
Nice box man i got a couple DD 9510k's im hoping to put in a Gatley box im probly gonna end up gettin into 18's so ima need a box for those ill check GP out good lookin 🤝✌️
💪🏽💪🏽
That box looks good
What did you use to wire the subs from inside the box to outside of it running to the amp?
Honestly for now I just drilled a hole big enough to get the wires through from the subs to the amp coning out the box. But Amazon has terminal cups for the low. I just haven’t really had time to pull everything out and install one
Hell ya man way better now. Did you put any sound deadening on the back of license plate? That always helps
Yes it has sound Deadening on trunk lid and tag
@@BassAddict91 that just means that shit slapping then lmao 🤣
Sounds great bro. Do you still have the same setup or you make changes?
Yes I do and thanks
Good shit man! When I install subs I use t nuts. Like 8/32s. That way you have some metal threads and can remove the subs as many times as you want... Check them out... That box looks legit. I was wondering about gp. Almost ordered one.
About to get some now bro great tip
I always keep the driver seat up in the back up and it’s louder for me
Salute bro🎉
Can’t go wrong with ddx’s
Yo bro keep it up. I like what u doin. Did u notice a huge difference goin from the Skar box to the "custom prefab". ?
I wouldn’t say it was huge but it was a big difference no the less
Where can I get a volt meter like yours? That it hittin' just right! 🎯💜
Dope video bro❤ imma try that it dont faze me 2
Bro use that flex seal rubber spray it works good I'm telling ya
i had them on a sk2500 and they loved it
Nice
Man I’m thinking about buying this box but I have 2 svr skar models on a 1500 do you think they would sound good in this box ?
Hey bro what type and size bolts did you use for the new box
Does the box slide ...I need something to make mines stationary. I had to replace 2 woofers already.any suggestions.
Go to the home improvement store get some “L” brackets
Good shit bro keep it up👌🏽👌🏽🔥🔥
For sure
Yeahhh thats strong
Once they broke in good you deff got more room to turn them up a lot more I done seen them ddx straight flexing out da box before cuzz
Yeah they are tanks for the price
Sounds hella good with this box bro !!!! What box you Prefer outta the skar an that gp? I have the Skar armor box they got an shii I was considering on gettin this box !!? How much better does it bump?
They both make good boxes it all depends on what your tryna get outta you system.
I just got my DDC -12 skar. What amp
should run? Vehicle-Crown Vic.
Ddx 12s? If so at least a 2500 watts
Thanks for sharing bro. I'm looking for a box for my two Skar VXFs
She beating!!!
Get a bigger amp a true 3-4k tuned clean though, u can't just turn up the gain and expect not be clipping at higher volumes
💪🏾💪🏾
Man when they break in and you can feed them jokers some more power, boy you ain't going to be able to tell your wife ish!🤣 You might have to put them on the Skar 3500 after you upgrade her electrical! But they sounding good bruh and great install keep doing your thing bruh much respect from N.C.
🤣🤣 thanks bro
Look towards MB Enclosures. He builds sub boxes and ships them.
Yeah I know I follow his channel as well
Can you install subs on the inside of the cutout? I bought that same box for a pair of kicker cvx 12s and they fit on the inside layer of the cutout
Now that one idk bro🤣. I don’t think I’ve ever seen that
Nice box
Thanks bro
What size and brand amp pushing your subs?
Sound good mane.
Thanks bro
What it do, where did you get those battery terminals for that XS battery? The name of them?
bigjeffaudio.com/products/pair-of-jims-machineworx-4-hole-4-0-bolt-down-screw-type-battery-terminal?variant=39271440318623
Use my discount code: BassAddict
Is that box still good
That box is nice.
Thanks bro
Yessir she got me about to get 2 15 🤣🤣
🤣🤣